Radxa Wiki - User contributions [en]

Taco

2024-07-22T07:14:43Z

Melo:

__NOTOC__

{{Languages|Taco}}

[[Home | Home]] > [[Taco | Taco NAS]]

=== Introduction ===
[[File:Taco.png | 500px | right]]
Radxa Taco is a complete NAS/Router solution designed based on the Raspberry Pi Compute Module 4. It utilizes the high-speed PCIe buses on CM4 for ultra-fast network connectivity and storage IO. It comes with the following features:

[[File:Taco_rpi.jpeg | 500px]]

(Image credit: [https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/268 @geerlingguy])

* Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD
* High-speed PCIe switch for SATA & Ethernet
* One 2.5G Ethernet and one native GbE
* One M.2 M Key for NVMe SSD
* One M.2 E Key for WiFi 6 modules or Google Coral AI module
* 12V DC power input for 2.5 and 3.5-inch HDD
* External standard ATX power supply support for 3.5inch HDD
* Support HDD suspend mode
* Support software RAID 0/1/5/10
* Support USB Direct Access Mode from PC(USB 2.0 only)
* Optional PWM control fan for HDD heat dispatching
* Optional OLED display for system info such as IP address or Storage usage

==== Detail of the board ====

[[File:Taco-front.png | 560px]]
[[File:Taco-back.png | 800px]]

==== Third Party Case ====

* https://www.thingiverse.com/thing:5838894

=== Getting Started ===

==== Installation OS ====

===== for Raspberry Pi CM4 =====

1. Download an image from here https://www.raspberrypi.com/software/operating-systems/

2. Clone usbboot and compile it

sudo apt install git libusb-1.0-0-dev pkg-config
git clone --depth=1 https://github.com/raspberrypi/usbboot
cd usbboot
make

3. Hold down the maskrom key, connect the computer using the A-A cable, and release the maskrom key

4. Run rpiboot and view the CM4 device

sudo ./rpiboot
lsblk # assume that CM4 is /dev/sdx

5. Burn the image to CM4

xz -d /path/to/yymmdd-raspios-bullseye-xx.img.xz
sudo dd if=/path/to/yymmdd-raspios-bullseye-xx.img of=/dev/sdx status=progress

===== for Radxa CM3 =====
* TBD

==== Software support ====

[[File:Taco-fan.png | 400px]]

We have provided a script to help control the Taco fan.

curl -sL https://rock.sh/get-taco | sudo -E bash -

Just copy the command above and paste it into the terminal and press enter.

==== Power Options ====

{| class="wikitable"
!
! Power Consumption
|-
| SSD
| <3W
|-
| 2.5 HDD
| 3 ~ 5W
|-
| 3.5 HDD
| 5 ~10W
|}

===== Option 1: Power from DC (5.5*2.5) =====

We recommend using a 12V/5A power adapter with interface DC 5525 to ensure stable power supply and optimal performance of the device.

===== Option 2: Power from ATX PSU =====

If you plan to put the Taco in a PC enclosure, then you can use the ATX PSU. Mostly ATX PSU can meet the power requirement. You need an ATX Floppy cable to power the Taco.

==== Known Issues ====
* Booting from M.2 NVMe SSD is not supported since there is no driver for the PCIe switch on the Taco in the Raspberry Pi bootloader.

File:MEdge-wechat.jpeg

2024-04-11T06:17:52Z

Melo:

File:20240313-194556.jpeg

2024-03-13T11:46:15Z

Melo:

File:Radxa x family wetchat.png

2024-02-29T02:21:12Z

Melo: Radxa X Family Wechat Group

Radxa X Family Wechat Group

Rock3/3a

2023-12-19T09:34:43Z

Melo:

{{rock3_header}}

{{Languages|rock3/3a}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-8 ">

= ROCK 3 Model A=
This is the documentation for ROCK 3 Model A, written by Radxa Team with community contributions.

ROCK 3A features a quad core Cortex-A55 ARM processor, 32bit 3200Mb/s LPDDR4, up to 4K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, GbE LAN, PCIe 3.0, PCIe 2.0, 40-pin color expansion header, RTC. Also, ROCK 3 supports USB PD and QC powering.

=== Close look of ROCK 3A ===

[[File:ROCK3 Model A正面.png | 400px]][[File:ROCK3 Model A反面.png|400px]]

=== <span id="get_start_specs"></span> Features ===

{| class="wikitable"
! Model
! colspan="1" width=80% | ROCK 3 Model A
|-
!SoC<br><br>CPU<br>GPU<br>NPU
| colspan="2" | '''RK3568''' <br><br>Quad-core Cortex-A55, freqency 2Ghz<br>
Mali G52<br>
0.8TOPS NPU
|-
! Memory
| colspan="2" | 2/4/8GB LPDDR4 3200MT/s, up to 1560MHz
|-
! Storage
| colspan="2" | eMMC<br>μSD card (μSD slot supports up to 128 GB μSD card)<br />M.2 SSD (M.2 connector supports up to 8TB M2 NVME SSD)
|-
! Display
| colspan="2" | HDMI 2.0 up to 4k*2k@60<br />MIPI DSI 2 lanes via FPC connector<br />Any two of HDMI, MIPI DSI can work at the same time, support mirror mode or extend mode.
|-
! Audio
| colspan="2" | 3.5mm jack with mic<br />HD codec that supports up to 24-bit/96KHz audio.
|-
! Camera
| colspan="2" | MIPI CSI 2 lanes via FPC connector, support up to 800 MP camera.
|-
! Wireless
| colspan="2" | None. Optional [[ROCKPI_wireless_module | ROCK Pi Wireless Module]]
|-
! USB
| colspan="2" | USB 3.0 OTG X1, hardware switch for host/device switch, upper one<br />USB 3.0 HOST X1<br />USB 2.0 HOST X2
|-
! Ethernet
| colspan="2" | GbE LAN with Power over Ethernet (PoE) support<br />additional HAT is required for powering from PoE
|-
! IO
| colspan="2" | 40-pin expansion header<br />7 x UART (UART2 is used for debug by default.)<br />1 x SPI bus<br />2 x I2C bus<br />6 x PWM<br />1 x ADC<br />1 x CAN<br />6 x GPIO<br />2 x 5V DC power in<br />1 x 3.3V DC power in
|-
! Others
| colspan="2" | RTC<br />RTC battery connector for time backup(optional)
|-
! Power
| colspan="2" | USB PD, support USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A.<br />Qualcomm® Quick ChargeTM: Supports QC 3.0/2.0 adapter, 9V/2A, 12V/1.5A
|-
! Size
| colspan="2" | 85mm x 56mm
|}

=== Getting start guide ===

Follow the [[Rock3/getting_started/rock-3a | Guide]] to start using your ROCK 3A.

=== Use Radxa Debian ===

Follow the [[Rock3/Debian | Radxa Debian Guide]]

=== Download and install third party OS ===

Find [[Rock3/downloads | more OS]] by the Radxa friends and the community.

=== Find supported accessories ===

Discover the [[Rock3/hardware#accessories | accessories]] that just work on ROCK 3A

=== Learn more about the hardware details ===

Learn more about the ROCK 3A [[Rock3/hardware/3a | connectors and pinout]]

Check the [[Rock3/hardware#datasheet | data sheets]] of the components used on ROCK 3A.

=== Availability ===

ROCK 3A is in massive production now. Radxa guarantee availability ROCK 3A until at least September 2029.

=== Certification ===

CE & FCC certification.

</div> 

<div class="col-md-4 ">

<div class="thumbnail ">[[File:ROCK 3A.png | 440px]]</div>

<div class="panel panel-hearts-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i>[[rock3/getting_started | Setup/Quick start ]]</h3> </div>
<div class="panel-body">
* [[rock3/getting_started/rock-3a | Getting started with ROCK 3A]], including what you need and how to get it booted.
* [[rock3/hardware/3a/gpio | ROCK 3A GPIO pinout]]
</div>
</div> 

<div class="panel panel-mango-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">
{{Community_updates}}
</div>
</div> 

<div class="panel panel-cocktail-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-users"></i> Community</h3></div>
<div class="panel-body">
* Forum: http://forum.radxa.com
* Discord: https://rock.sh/go
* QQ Group: 591048098
* Wechat Group: [[File:Werock3.jpg | 120px]]
* [[Rockpi4/contribute | How to contribute to this wiki, refer ROCK Pi 4 contribution page]]
</div>
</div> 

</div> 

</div>

RockpiS/getting started

2023-12-08T07:21:36Z

Melo:

{{rockpiS_header}}
{{Languages|rockpiS/getting_started}}

[[rockpiS | ROCK Pi S]] > [[rockpiS/getting_started | Getting started]]

__TOC__

This guide is designed for ROCK Pi S enthusiast. The purpose is to learn about the ROCK Pi S board as well as how to prepare and set up for basic use. We will introduce the board information as much as possible.

== What you need ==

=== Necessary ===
* ROCK Pi S main board

* One of the Storage media below:
** μSD card, larger than 8GB.

* USB type C to type A cable
** For both power and USB communication(adb/fastboot) with HOST PC.

* PC/Laptop which has USB ports
** The ROCK Pi S can be powered from the PC/Laptop USB ports directly

=== Optional ===

* Power adapter
** If you want to power ROCK Pi S standalone, you can use 5V/1A or 5V/2A power adapter with USB C ports. You can also use the USB PD/QC power adapter without worrying damage the board because the PD/QC adapter will detect ROCK Pi S only supports 5V so the adapter will output 5V.

* μSD Card Reader
** For flashing the image into μSD Card.

* USB to TTL serial cable
** For serial console, low level troubleshooting, development etc.

* Ethernet cable
** ROCK Pi S supports Internet access via WIFI or Ethernet.
** An Ethernet cable is used to connect your ROCK Pi S to a local network and the Internet.

== Close look of ROCK Pi S ==
* ROCK Pi S front view
[[File:Rockpi_s_top_1200px.jpeg|600px]]
* ROCK Pi S front with an angle view
[[File:Rockpi_s_angel_1200px.jpeg|600px]]
* ROCK Pi S back view
[[File:Rockpi_s_back_1200px.jpeg|600px]]

== <span id="get_start_specs"></span> Features ==

{| class="wikitable"
! Model
! colspan="1" | ROCK Pi S
|-
! Processor
| colspan="2" | SoC RK3308B <br />Quad Cortex-A35 ARM 64bits processor <br /> frequency up to 1.0GHz
|-
! Memory
| colspan="2" | 256MB or 512MB DDR3
|-
! Storage
| colspan="2" | MicroSD(TF), optional on board 1/2/4/8Gb NAND flash
|-
! Wireless
| colspan="2" | 802.11 b/g/n wifi <br /> BT 4.0(rtl8723DS) <br /> external antenna
|-
! USB
| colspan="2" | USB2.0 Type-A HOST x1 <br /> USB3.0 Type-C OTG x1
|-
!| Key
| colspan="2" | maskrom x1 <br /> reset x1
|-
! Ethernet
| colspan="2" | 100MB ethernet, optional PoE(additional HAT requried)
|-
! IO
| colspan="2" | 26-pin expansion header <br /> I2C x4 <br /> PWM x3 <br /> SPI x2<br /> UART x3<br /> I2S0 x1<br /> 5V DC power in x2 <br /> 3.3V DC power in x2
|-
! Others
| colspan="2" | ---
|-
! Power
| colspan="2" | USB Type-C DC 5V
|-
! Size
| colspan="2" | 1.7inch square
|}

__TOC__

== Starting the board for the first time ==

ROCK Pi S can be started with μSD Card.

=== 1. Prepare the image ===

* When start system with μSD Card
Insert the μSD Card into μSD Card Reader, which connects to host computer.

=== 2. Write Image to uSD card ===

* Download the flash tool, etcher, from [[rockpiS/downloads | Downloads]]. Choose the right version for your host operation system. Here we operate on host Ubuntu 16.04.

* After unpacking the package, we run the tool by executing the command

$ ./etcher-etcher-electron-1.4.5-x86_64.AppImage

If you get an error message: "No polkit authentication agent found" you can try and start it with sudo, but do know that this is running the tool as '''root'''.

* In the etcher window, click '''Select image'''.

[[File:linux_etcher_select_image.png]]

* In the etcher window, click '''Select Drive'''.

[[File:linux_etcher_select_driver.png]]

* In the etcher window, click '''Flash'''.

[[File:linux_etcher_select_flash_button.png]]

* In the etcher window, once it shows us Flash Complete! It is done and can be put into the ROCK Pi S.

[[File:linux_etcher_show_complete.png]]

=== 3. Boot the board ===

* Now insert the uSD card to the board.

* Use a USB C to USB A cable, connect the board to your PC

* ROCK Pi S will boot, the green power led is on, and after a while, the blue led start blinking

* (Optional)Use a USB to TTL serial cable to make a connection between your PC and ROCK Pi S. See [[rockpiS/dev/serial-console | Serial Console]]

=== 4. Access from the Host PC/Laptop ===

==== Option 1: USB access(adb) ====
By default, the ROCK Pi S Linux image enables adbd services, which is a debug bridge from Android now ported on Linux. With one USB A to C cable you can power and access the board, very handy.

To use adb, you need to install adb tool on the PC/Laptop. Check instructions for [[Rock/windows_adb | Windows]] and [[Rock/linux_adb | Linux]].

After you have adb installed successfully, run the following command on console to login the shell of ROCK Pi S:

adb shell

Check [[rockpiS/dev/adb | Using adb]].

==== Option 2: Serial console ====

Check [[rockpiS/dev/serial-console | Serial Console]]

==== Option 3: SSH ====
SSH server is enabled on port 22 of ROCK Pi S default image.

Please use [https://angryip.org/ angryip] to find your board IP address.

To access ROCK Pi S by SSH, try

ping rockpis.local
ssh rock@rockpis.local

or if your router/network doesn't support Local Domain, you need to check your network/router administrator page and look for the ROCK Pi S ip address.

ping ip-of-device
ssh rock@ip-of-device

Note: You can also get the IP of ROCK Pi S from option 1 or option 2 if you can not access network administrator page.

=== 5.Network state ===

*Look at network configure:

$ sudo ifconfig

*Test network:

$ ping -c 5 www.google.com

=== 6.WIFI Connection ===

Check [[rockpiS/Debian#WIFI Connection| WIFI Connection]].

=== 7.BT ===

Check [[rockpiS/Debian#BT| BT]].

=== 8.Buttons ===

ROCK Pi S has reset key and maskrom key:

[[File:Keys.jpeg | 300px]]

*Reset key:

Press and release this key to reset ROCK Pi S.

*Maskrom key:

ROCK Pi S supports boot on SD NAND flash. By default, SD NAND starts before TF card. Press the maskrom key to ignore the SD NAND flash when ROCK Pi S is powered on.

=== 9.LED ===

ROCK Pi S has Power LED and User LED.

* Power LED

Power LED is green, which can be configured by sysfs.

The related directory is /sys/class/leds/rockpis:green:power

It is always on when ROCK Pi S is given power by default,

* User LED

User LED is blue, which can be configured by sysfs.

The related directory is /sys/class/leds/rockpis:blue:user

By default, its blink status shows the running kernel.

=== 10.GPIO ===

ROCK Pi S has two 26-pin expansion headers. Each pin is distinguished by color, more information click [https://wiki.radxa.com/RockpiS/hardware/gpio here]

Development for GPIO ROCK Pi S support libmraa GPIO library, click [https://wiki.radxa.com/RockpiS/dev/libmraa here] to get more information.

=== 11.Using OTG ===

ROCK Pi S has an USB type-C OTG connector, which you can use to write(or read) data by PC to (or from) ROCK Pi S, more help click [https://wiki.radxa.com/RockpiS/dev/otg here]

== Next Step ==

* [[RockpiS/Debian | More Debian image usage and tips]]
* [[RockpiS/dev/sdnand-install | Install image to SD Nand if your board has]]
* [[RockpiS/hardware | Checkout the hardware details]]
* Join the [https://forum.radxa.com/c/rockpiS community] and the [https://t.me/rockpi4 discussion group]

== Troubleshooting ==
* Refer [[RockpiS/getting_started/troubleshooting | Troubleshooting page]]
* Post your issue on the forum: https://forum.radxa.com/c/rockpiS

Rock5/5b/getting started

2023-07-31T02:12:11Z

Melo:

{{rock5_header}}
{{Languages|rock5/3a/getting_started}}

[[rock5 | ROCK 5]] > [[Rock5/5b | ROCK 5 Model B]] > [[Rock5/5b/getting_started | Getting started]]

__TOC__

= Getting Started =

<font face="Times New Roman" > This guide is designed for ROCK 5B enthusiast. The purpose is to learn about ROCK 5B as well as how to prepare and set up for basic use. </font>
<font face="Times New Roman" > When you get a board, you need to know what model it is and which hardware version it is. </font>
<font face="Times New Roman" > The information is printed in the top side of the board. We will introduce the board information as much as possible. </font>

== Close look of ROCK 5B ==
* ROCK 5B front view
[[File:Rock5b-v142-top.jpg|500px]]

* ROCK 5B front with an angle view
[[File:Rock5b-v142-angel.jpg|500px]]

* ROCK 5B back view
[[File:Rock5b-v142-bottom.jpg|500px]]

For the detailed hardware description and pinout, please refer [[Rock5/hardware/5b | ROCK 5B hardware page]].

== <span id="get_start_specs"></span> Features ==

== What you need ==

=== Necessary ===
* ROCK 5B main board

* One of the Storage media below:
** microSD, larger than 8GB
** eMMC module, larger than 8GB

* [[rock5/5b/power_supply | Power supply]]
** The ROCK 5B is powered by Type-C port and has a wide range of input voltage, from 5V to 21V. ROCK 5B supports USB Type-C PD 2.0 with 9V/2A, 12V/2A, 15V/2A and 20V/2A.
** The Type-C cable you using needs to support data communication. We call it USB Type-C charging data cable.

* USB Keyboard and Mouse
** With four USB-A connectors, ROCK 5B can be equipped with a full sized keyboard and mouse.

* Monitor and HDMI Cable
** ROCK 5B is equipped with a full sized HDMI connector. HDMI capable monitor is recommended.
** HDMI EDID display data is used to determine the best display resolution. On monitors and TVs that support 1080p (or 4K/8K) this resolution will be selected. If 1080p is not supported the next available resolution reported by EDID will be used. This selected mode will work with MOST but not all monitors/TVs.

*USB to TTL serial cable
**ROCK 5B exports a dedicated serial console for CPU, which can access the low level debug message.

*USB type A to type C cable
**If you want to write image on ROCK 5B from USB OTG port or use fastboot/adb commands you need an USB type A to type C cable to connect ROCK 5B and PC.

=== Optional ===

* microSD Card Reader
** For flashing the image to the microSD Card

* Ethernet cable
** ROCK 5B supports internet access via Ethernet.
** An Ethernet cable is used to connect your ROCK 5B to a local network and the Internet.

* USB type A to type C cable
** This is needed for fastboot/adb commands and the maskrom mode for advanced flashing.

* USB to TTL serial cable
** This is needed for serial console.

* Camera Module
** ROCK 5B supports camera function.

* LCD Module
** ROCK 5B supports LCD display function.

* Audio cable
** Audio can be played through speaker or headphones using a standard 3.5mm jack.

* [[rock5/hardware/wifi | WiFi/BT Cards]]

== Starting the board for the first time ==

ROCK 5B can be started with eMMC Module or μSD Card. Now, you are presented with three options when installing your new operating system onto your ROCK 5B.

=== Prepare ===
* When starting system with eMMC Module
(Option a) Insert the eMMC Module into ROCK Pi eMMC USB Reader. Then plug the ROCK Pi eMMC USB Reader into host PC.

(Option b) Insert eMMC Module into eMMC to μSD card converter board. Insert the converter board into μSD Card Reader. Then plug the Card Reader into host PC.

* When starting system with μSD Card
(Option c) Insert the μSD Card into μSD Card Reader. Then plug the Card Reader into host PC.

=== Write Image ===

* Download the official Ubuntu/Debian system image from [[rock5/downloads | Downloads]].

* Download the flash tool, etcher, from [[rock5/downloads | Downloads]]. Choose the right version for your host operation system. Here we operate on host Ubuntu 20.04.

* After unpacking the package, we run the tool by double-clicking BalenaEtcher icon.

If you get an error message: "No polkit authentication agent found" you can try and start it with sudo, but do know that this is running the tool as '''root'''.

* In the etcher window, click '''Select image'''.

[[File:etcher-rock-5b-1.png]]

* In the etcher window, click '''Select Drive'''.

[[File:etcher-rock-5b-2.png]]

* In the etcher window, click '''Flash'''.

[[File:etcher-rock-5b-3.png]]

* In the etcher window, once it shows us Flash Complete! It is done and can be put into the RockPi.

[[File:etcher-rock-5b-4.png]]

=== 3. Boot the board ===

* Now insert the system storage media, μSD Card or eMMC Module into the socket on the board.

* (Optional) Use the USB to TTL serial cable to setup a connection between PC and ROCK 5B board. See [[rock5/dev/serial-console | Serial Console]].

* Power on ROCK 5B by adapter with type C port.

* ROCK 5B will boot with the green power LED on. And after a while, another blue LED starts blinking.

=== 4. Access from the Host PC/Laptop ===

==== Option 1: HDMI monitor and Mouse ====

You would see Desktop on HDMI monitor.

==== Option 2: Serial console ====

Check [[rock5/dev/serial-console | Serial Console]]

==== Option 3: SSH ====
SSH server is enabled on port 22 of ROCK 5B default image.

Please use [https://angryip.org/ angryip] to find your board IP address.

To access ROCK 5B by SSH, try

ping rock-5b.local
ssh rock@rock-5b.local

or if your router/network doesn't support Local Domain, you need to check your network/router administrator page and look for the ROCK 5B ip address.

ping ip-of-device
ssh rock@ip-of-device

Note: You can also get the IP of ROCK 5B from option 1 if you can not access network administrator page.

=== 5.Network state ===

*Look at network configure:

$ sudo ifconfig

*Test network:

$ ping -c 5 www.google.com

=== 6.WIFI Connection ===

Check [[rock5/linux/debian#wifi-connection | WIFI Connection]].

=== 7.BT ===

Check [[rock5/linux/debian#BT | BT]].

=== 8.LED ===

ROCK 5B has Power LED and User LED.

* Power LED

The power LED is green. It is always on when ROCK 5B is connected to any power source.

* User LED

The user LED is blue. By default, its blink status shows the running kernel.

=== 9.GPIO ===

ROCK 5B has one 40-pin expansion headers. Each pin is distinguished by color, more information click [[rock5/hardware/5b/gpio | ROCK 5B GPIO]].

Development for GPIO. ROCK 5B supports libmraa GPIO library, click [[rock5/dev/libmraa | here]] to get more information.

== Next Step ==

* [[rock5/linux/debian | More Debian image usage and tips]]
* [[rock5/hardware | Checkout the hardware details]]
* Join the [https://forum.radxa.com/c/rock3 community] and the [https://t.me/rockpi4 discussion group]

<br>

Rock5/5b/getting started

2023-07-31T02:04:16Z

Melo:

{{rock5_header}}
{{Languages|rock5/3a/getting_started}}

[[rock5 | ROCK 5]] > [[Rock5/5b | ROCK 5 Model B]] > [[Rock5/5b/getting_started | Getting started]]

__TOC__

<font face="Times New Roman" >

= Getting Started =

<font face="Times New Roman" > This guide is designed for ROCK 5B enthusiast. The purpose is to learn about ROCK 5B as well as how to prepare and set up for basic use. </font>
<font face="Times New Roman" > When you get a board, you need to know what model it is and which hardware version it is. </font>
<font face="Times New Roman" > The information is printed in the top side of the board. We will introduce the board information as much as possible. </font>

== Close look of ROCK 5B ==
* ROCK 5B front view
[[File:Rock5b-v142-top.jpg|500px]]

* ROCK 5B front with an angle view
[[File:Rock5b-v142-angel.jpg|500px]]

* ROCK 5B back view
[[File:Rock5b-v142-bottom.jpg|500px]]

For the detailed hardware description and pinout, please refer [[Rock5/hardware/5b | ROCK 5B hardware page]].

== <span id="get_start_specs"></span> Features ==

== What you need ==

=== Necessary ===
* ROCK 5B main board

* One of the Storage media below:
** microSD, larger than 8GB
** eMMC module, larger than 8GB

* [[rock5/5b/power_supply | Power supply]]
** The ROCK 5B is powered by Type-C port and has a wide range of input voltage, from 5V to 21V. ROCK 5B supports USB Type-C PD 2.0 with 9V/2A, 12V/2A, 15V/2A and 20V/2A.
** The Type-C cable you using needs to support data communication. We call it USB Type-C charging data cable.

* USB Keyboard and Mouse
** With four USB-A connectors, ROCK 5B can be equipped with a full sized keyboard and mouse.

* Monitor and HDMI Cable
** ROCK 5B is equipped with a full sized HDMI connector. HDMI capable monitor is recommended.
** HDMI EDID display data is used to determine the best display resolution. On monitors and TVs that support 1080p (or 4K/8K) this resolution will be selected. If 1080p is not supported the next available resolution reported by EDID will be used. This selected mode will work with MOST but not all monitors/TVs.

*USB to TTL serial cable
**ROCK 5B exports a dedicated serial console for CPU, which can access the low level debug message.

*USB type A to type C cable
**If you want to write image on ROCK 5B from USB OTG port or use fastboot/adb commands you need an USB type A to type C cable to connect ROCK 5B and PC.

=== Optional ===

* microSD Card Reader
** For flashing the image to the microSD Card

* Ethernet cable
** ROCK 5B supports internet access via Ethernet.
** An Ethernet cable is used to connect your ROCK 5B to a local network and the Internet.

* USB type A to type C cable
** This is needed for fastboot/adb commands and the maskrom mode for advanced flashing.

* USB to TTL serial cable
** This is needed for serial console.

* Camera Module
** ROCK 5B supports camera function.

* LCD Module
** ROCK 5B supports LCD display function.

* Audio cable
** Audio can be played through speaker or headphones using a standard 3.5mm jack.

* [[rock5/hardware/wifi | WiFi/BT Cards]]

== Starting the board for the first time ==

ROCK 5B can be started with eMMC Module or μSD Card. Now, you are presented with three options when installing your new operating system onto your ROCK 5B.

=== Prepare ===
* When starting system with eMMC Module
(Option a) Insert the eMMC Module into ROCK Pi eMMC USB Reader. Then plug the ROCK Pi eMMC USB Reader into host PC.

(Option b) Insert eMMC Module into eMMC to μSD card converter board. Insert the converter board into μSD Card Reader. Then plug the Card Reader into host PC.

* When starting system with μSD Card
(Option c) Insert the μSD Card into μSD Card Reader. Then plug the Card Reader into host PC.

=== Write Image ===

* Download the official Ubuntu/Debian system image from [[rock5/downloads | Downloads]].

* Download the flash tool, etcher, from [[rock5/downloads | Downloads]]. Choose the right version for your host operation system. Here we operate on host Ubuntu 20.04.

* After unpacking the package, we run the tool by double-clicking BalenaEtcher icon.

If you get an error message: "No polkit authentication agent found" you can try and start it with sudo, but do know that this is running the tool as '''root'''.

* In the etcher window, click '''Select image'''.

[[File:etcher-rock-5b-1.png]]

* In the etcher window, click '''Select Drive'''.

[[File:etcher-rock-5b-2.png]]

* In the etcher window, click '''Flash'''.

[[File:etcher-rock-5b-3.png]]

* In the etcher window, once it shows us Flash Complete! It is done and can be put into the RockPi.

[[File:etcher-rock-5b-4.png]]

=== 3. Boot the board ===

* Now insert the system storage media, μSD Card or eMMC Module into the socket on the board.

* (Optional) Use the USB to TTL serial cable to setup a connection between PC and ROCK 5B board. See [[rock5/dev/serial-console | Serial Console]].

* Power on ROCK 5B by adapter with type C port.

* ROCK 5B will boot with the green power LED on. And after a while, another blue LED starts blinking.

=== 4. Access from the Host PC/Laptop ===

==== Option 1: HDMI monitor and Mouse ====

You would see Desktop on HDMI monitor.

==== Option 2: Serial console ====

Check [[rock5/dev/serial-console | Serial Console]]

==== Option 3: SSH ====
SSH server is enabled on port 22 of ROCK 5B default image.

Please use [https://angryip.org/ angryip] to find your board IP address.

To access ROCK 5B by SSH, try

ping rock-5b.local
ssh rock@rock-5b.local

or if your router/network doesn't support Local Domain, you need to check your network/router administrator page and look for the ROCK 5B ip address.

ping ip-of-device
ssh rock@ip-of-device

Note: You can also get the IP of ROCK 5B from option 1 if you can not access network administrator page.

=== 5.Network state ===

*Look at network configure:

$ sudo ifconfig

*Test network:

$ ping -c 5 www.google.com

=== 6.WIFI Connection ===

Check [[rock5/linux/debian#wifi-connection | WIFI Connection]].

=== 7.BT ===

Check [[rock5/linux/debian#BT | BT]].

=== 8.LED ===

ROCK 5B has Power LED and User LED.

* Power LED

The power LED is green. It is always on when ROCK 5B is connected to any power source.

* User LED

The user LED is blue. By default, its blink status shows the running kernel.

=== 9.GPIO ===

ROCK 5B has one 40-pin expansion headers. Each pin is distinguished by color, more information click [[rock5/hardware/5b/gpio | ROCK 5B GPIO]].

Development for GPIO. ROCK 5B supports libmraa GPIO library, click [[rock5/dev/libmraa | here]] to get more information.

== Next Step ==

* [[rock5/linux/debian | More Debian image usage and tips]]
* [[rock5/hardware | Checkout the hardware details]]
* Join the [https://forum.radxa.com/c/rock3 community] and the [https://t.me/rockpi4 discussion group]

<br>

</font>

Rock5/5b/getting started

2023-07-31T01:59:18Z

Melo:

Rock3/CM3/revision

2023-07-10T09:02:32Z

Melo:

{{rock3_header}}
{{Languages|rock3/hardware/revision}}

[[rock3 | Radxa ROCK 3]] > [[rock3/CM3 | CM3]] > [[rock3/CM3/revision | CM3 Hardware Revision]]

== v1.1 ==
* First public revision

== v1.2 ==
* LED on the CM3 now can be controlled by GPIO
* Move the power on trigger circuit to the SoM

== v1.3 ==
* Pinout change: MIPI CSI 4-lanes split to two MIPI CSI 2-lanes,
* Export the PMIC_SLEEP_H signal for carry board to know the SoM suspend status
* Details can be found on [[Rock3/CM/CM3/pinout#Pinout_Change_History | Pinout page]].

== v1.31 ==
* Exchange Signal Position
* Details can be found on [[Rock3/CM/CM3/pinout#Pinout_Change_History | Pinout page]].

== v1.32 ==
* Exchange Signal Position
* Details can be found on [[Rock3/CM/CM3/pinout#Pinout_Change_History | Pinout page]].

Rock3/CM3/revision

2023-07-10T08:59:08Z

Melo:

{{rock3_header}}
{{Languages|rock3/hardware/revision}}

[[rock3 | Radxa ROCK 3]] > [[rock3/CM3 | CM3]] > [[rock3/CM3/revision | CM3 Hardware Revision]]

== v1.1 ==
* First public revision

== v1.2 ==
* LED on the CM3 now can be controlled by GPIO
* Move the power on trigger circuit to the SoM

== v1.3 ==
* Pinout change: MIPI CSI 4-lanes split to two MIPI CSI 2-lanes,
* Export the PMIC_SLEEP_H signal for carry board to know the SoM suspend status
* Details can be found on [[Rock3/CM/CM3/pinout#Pinout_Change_History | Pinout page]].

== v1.31 ==
* Switching Signal Positions
* Details can be found on [[Rock3/CM/CM3/pinout#Pinout_Change_History | Pinout page]].

== v1.32 ==
* Switching Signal Positions
* Details can be found on [[Rock3/CM/CM3/pinout#Pinout_Change_History | Pinout page]].

Rock3/CM3/revision

2023-07-10T08:58:07Z

Melo: /* v1.31 */

Rock3/CM3/revision

2023-07-10T08:56:55Z

Melo:

{{rock3_header}}
{{Languages|rock3/hardware/revision}}

[[rock3 | Radxa ROCK 3]] > [[rock3/CM3 | CM3]] > [[rock3/CM3/revision | CM3 Hardware Revision]]

== v1.1 ==
* First public revision

== v1.2 ==
* LED on the CM3 now can be controlled by GPIO
* Move the power on trigger circuit to the SoM

== v1.3 ==
* Pinout change: MIPI CSI 4-lanes split to two MIPI CSI 2-lanes,
* Export the PMIC_SLEEP_H signal for carry board to know the SoM suspend status
* Details can be found on [[Rock3/CM/CM3/pinout#Pinout_Change_History | Pinout page]].

== v1.31 ==
* Swap SARADC_IN3(J69, Pin37) to J1, Pin14
* Swap 4G_DISABLE(J1, Pin34) to J69, Pin37
* Swap PCIE_PWREN_H(J1, Pin14) to J1, Pin34

Rock3/CM/CM3

2023-07-07T03:13:35Z

Melo:

{{rock3_header}}
{{Languages|rock3/CM/CM3}}

__NOTOC__

== Radxa CM3 ==

Radxa Compute Module 3(Radxa CM3) is an SoM(System on Module) by Radxa based on Rockchip RK3566 SoC in a small form factor at 55mm x 40mm size, integrating CPU/PMU/DRAM/STORAGE/Wireless. Radxa CM3 offers out of box cost-effective solution for multiple purpose applications, accelerates customer's product development.

=== Block Diagram ===

[[File:Cm3-block-diagram.jpg | 800px]]

=== Components Overview ===

{| class="wikitable"
|-
! No.
! Description
! No.
! Description
|-
| ①
| SPI Flash disable button
| ⑧
| RK817-5 PMIC
|-
| ②
| SPI Flash
| ⑨
| RTL8211F ethernet phy
|-
| ③
| eMMC disable button
| ⑩
| eMMC chip
|-
| ④
| WiFi/BT module
| ⑪
| B2B connector 2 (J68)
|-
| ⑤
| WiFi/BT antenna
| ⑫
| B2B connector 3 (J1)
|-
| ⑥
| LPDDR4 dram chip
| ⑬
| B2B connector 1 (J69)
|-
| ⑦
| RK3566 SoC
|
|
|}

[[File:Cm3-mark.jpeg | 800px]]

=== Pinout ===

Refer [[rock3/CM/CM3/pinout]] page

== Resources ==

* [[Rock3/CM3/vsCM4 |Radxa CM3 vs Raspberry Pi CM4]]
* [[Rock3/CM3/models | Order Info(Models & SKU)]]
* [[Rock3/CM3/pinout | CM3 Pinout]]
* [https://dl.radxa.com/cm3/docs/radxa_cm3_product_brief_Revision_1.8_g52223c9.pdf Radxa CM3 Product Brief v1.8]
* [https://dl.radxa.com/cm3/docs/hw/radxa_cm3_dimension.dxf Radxa CM3 Dimension]

* Compliance
** [https://dl.radxa.com/cm3/docs/compliance/radxa_cm3_ce_red_report.zip CE RED]
** FCCID: [https://fccid.io/2A3PA-RADXA-CM3 2A3PA-RADXA-CM3]

* Design files of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.2_SCH_20220107.pdf v1.2 schematic pdf] - Download Schematic of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.2_CAM_20220107.pdf v1.2 CAM pdf] - Download components Position Reference of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.31A_SCH_20221010.pdf v1.3 schematic pdf] - Download Schematic of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.31A_CAM_20220526.pdf v1.3 CAM pdf] - Download components Position Reference of CM3

* Reference design of carrier board(CM3 IO Board)
** [https://github.com/radxa/radxa-cm3-projects/tree/main/radxa-cm3-io CAD design files of CM3 IO board]

* [[rock3/CM3/revision | Hardware Revision]] - Difference between each hardware revisions
* [[Rock3/CM3/models | Models and SKUs]] - Different variant of each models

== Devices ==

=== Carrier Boards from Radxa ===

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Radxa_e23_top_bottom.jpg | x100px ]]
| [[Rock3/CM3/e23 | Radxa E23 Dual Ethernet board]]
|
|-
| [[File:Radxa_cm3_io_board.jpg | x100px]]
| [[Rock3/CM3/radxacm3io | Radxa CM3 IO Board ]]
|
|}

=== Carrier Boards from third party ===
The following carrier boards are tested and compatible with the Radxa CM3 '''with on-board eMMC'''.

Currently no eMMC revision cannot boot from microSD on Raspberry Pi CM4 IO and compatibles. We will fix this in a later hardware revision.

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Cm3_rpicm4_io_board.png | x100px ]]
| [[Rock3/CM3/raspcm4io | Raspberry Pi Compute Module 4 IO Board]]
| [https://www.raspberrypi.com/products/compute-module-4-io-board/ website]
|-
| [[File:Cm3_seeed_dual_gbe.png | x100px ]]
| [[Rock3/CM3/seeeddualgbe | Seeed Studio Dual Gigabit Ethernet Carrier Board]]
| [https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html website]
|-
| [[File:Cm3_waveshare_cm4_io_base.jpg | x100px ]]
| [[Rock3/CM3/wavesharecm4iobase | Waveshare CM4 IO Base]]
| [https://www.waveshare.com/wiki/CM4-IO-BASE-B website]
|-
| [[File:Cm3_mcuzone_cm4_mini.jpg | x100px]]
| [[Rock3/CM3/mcuzonecm4mini | Mcuzone CM4 Mini]]
| [https://www.aliexpress.com/item/1005001972265702.html website]
|-
| [[File:Cm3_mcuzone_cm4_tiny.jpg | x100px]]
| [[Rock3/CM3/mcuzonecm4tiny | Mcuzone CM4 Tiny]]
| [https://www.aliexpress.com/item/1005002206178734.html website]
|}

Rock3/CM/CM3S/pinout

2023-05-05T09:37:54Z

Melo:

{{rock3_header}}
{{Languages|rock3/CM/CM3S/pinout}}

[[rock3 | ROCK 3]] > [[rock3/CM | Compute Module]] > [[rock3/CM/CM3S | CM3 SODIMM]] > [[rock3/CM/CM3S/pinout | CM3 SODIMM Pinout]]

__TOC__

Download [https://dl.radxa.com/cm3s/docs/hw/radxa_cm3s_v1.5_pinout.xlsx radxa_cm3sodimm_v1.5_pinout.xlsx]

{| class="wikitable"
|-
! colspan="9" | Radxa CM3 SODIMM v1.5 Pinout
|-
| PIN Number
| style="background-color:#D62E4E; color:#FFF;" | Raspberry Pi CM3+
| style="background-color:#BBE33D;" | Radxa CM3 SODIMM
| style="background-color:#C5E0B4;" | Function 0
| style="background-color:#C5E0B4;" | Function 1
| style="background-color:#C5E0B4;" | Function 2
| style="background-color:#C5E0B4;" | Function 3
| style="background-color:#C5E0B4;" | Function 4
| style="background-color:#C5E0B4;" | Function 5
|-
| 1
| GND
| GND
| GND
|
|
|
|
|
|-
| 2
| EMMC_DISABLE_N
| RECOVERY
| RECOVERY
|
|
|
|
|
|-
| 3
| GPIO0/SDA0/VCLK
| I2C2_SDA_M1
| GPIO4_B4
| I2C2_SDA_M1
| EBC_GDSP
|
| ISP_FLASH_TRIGIN
| VOP_BT656_CLK_M1
|-
| 4
| SDX_VREF
| 3V3/1V8
| 3V3/1V8
|
|
|
|
|
|-
| 5
| GPIO1/SCL0/DSYNC
| I2C2_SCL_M1
| GPIO4_B5
| I2C2_SCL_M1
| EBC_SDSHR
|
| I2S1_SDO3_M1
|
|-
| 6
| SDX_VREF
| 3V3/1V8
| 3V3/1V8
|
|
|
|
|
|-
| 7
| GND
| GND
| GND
|
|
|
|
|
|-
| 8
| GND
| GND
| GND
|
|
|
|
|
|-
| 9
| GPIO2/SDA1/VSYNC
| I2C1_SDA
| GPIO0_B4
| I2C1_SDA
| PCIE20_BUTTONRSTn
| MCU_JTAG_TCK
|
|
|-
| 10
| SD3_CLK
| SDMMC0_CLK
| GPIO2_A2
| SDMMC0_CLK
| TEST_CLKOUT
| UART5_TX_M0
|
|
|-
| 11
| GPIO3/SCL1/HSYNC
| I2C1_SCL
| GPIO0_B3
| I2C1_SCL
|
| MCU_JTAG_TDO
|
|
|-
| 12
| SD3_CMD
| SDMMC0_CMD
| GPIO2_A1
| SDMMC0_CMD
| PWM10_M1
| UART5_RX_M0
|
|
|-
| 13
| GND
| GND
| GND
|
|
|
|
|
|-
| 14
| GND
| GND
| GND
|
|
|
|
|
|-
| 15
| GPIO4/GPCLK1/VID0
| I2S1_SDI2_M1
| GPIO3_D4
| CIF_D6
| EBC_SDDO6
| SDMMC2_DET_M0
| I2S1_SDI2_M1
| VOP_BT656_D6_M1
|-
| 16
| SD3_DAT0
| SDMMC0_D0
| GPIO1_D5
| SDMMC0_D0
| UART2_TX_M1
| UART6_TX_M1
| PWM8_M1
|
|-
| 17
| GPIO5/CAM_CLK/VID1
| CAM_CLK
| GPIO4_A7
| CAM_CLKOUT0
| EBC_SDCE1
| GMAC1_RXD0_M1
| SPI3_CS1_M0
| I2S1_LRCK_RX_M1
|-
| 18
| SD3_DAT1
| SDMMC0_D1
| GPIO1_D6
| SDMMC0_D1
| UART2_RX_M1
| UART6_RX_M1
| PWM9_M1
|
|-
| 19
| GND
| GND
| GND
|
|
|
|
|
|-
| 20
| GND
| GND
| GND
|
|
|
|
|
|-
| 21
| GPIO6/GPCLK2/VID2
| I2S1_SDI3_M1
| GPIO3_D5
| CIF_D7
| EBC_SDDO7
| SDMMC2_PWREN_M0
| I2S1_SDI3_M1
| VOP_BT656_D7_M1
|-
| 22
| SD3_DAT2
| SDMMC0_D2
| GPIO1_D7
| SDMMC0_D2
| ARM_JTAG_TCK
| UART5_CTSn_M0
|
|
|-
| 23
| GPIO7/SPI0_CE1/VID3
| I2S1_LRCK_RX_M1
| GPIO4_A7
| CAM_CLKOUT0
| EBC_SDCE1
| GMAC1_RXD0_M1
| SPI3_CS1_M0
| I2S1_LRCK_RX_M1
|-
| 24
| SD3_DAT3
| SDMMC0_D3
| GPIO2_A0
| SDMMC0_D3
| ARM_JTAG_TMS
| UART5_RTSn_M0
|
|
|-
| 25
| GND
| GND
| GND
|
|
|
|
|
|-
| 26
| GND
| GND
| GND
|
|
|
|
|
|-
| 27
| GPIO8/SPI0_CE0/VID4
| SPI3_CSO_M0
| GPIO4_A6
| ISP_FLASHTRIGOUT
| EBC_SDCE0
| GMAC1_TXEN_M1
| SPI3_CS0_M0
| I2S1_SCLK_RX_M1
|-
| 28
| GPIO28/SDA0/PCM_CLK
| I2C3_SDA_ACODEC
| GPIO1_A0
| I2C3_SDA_M0
| UART3_RX_M0
|
| AUDIOPWM_LOUT_P
|
|-
| 29
| GPIO9/SPI0_MISO/VID5
| SPI3_MISO_M0
| GPIO4_B0
| CAM_CLKOUT1
| EBC_SDCE2
| GMAC1_RXD1_M1
| SPI3_MISO_M0
| I2S1_SDO1_M1
|-
| 30
| GPIO29/SCL0/PCM_FS
| I2C3_SCL_ACODEC
| GPIO1_A1
| I2C3_SCL_M0
| UART3_TX_M0
|
| AUDIOPWM_LOUT_N
|
|-
| 31
| GND
| GND
| GND
|
|
|
|
|
|-
| 32
| GND
| GND
| GND
|
|
|
|
|
|-
| 33
| GPIO10/SPI0_MOSI/VID6
| SPI3_MOSI_M0
| GPIO4_B2
| I2C4_SDA_M0
| EBC_VCOM
| GMAC1_RXER_M1
| SPI3_MOSI_M0
| I2S2_SDI_M1
|-
| 34
| GPIO30/CTS2/PCM_DIN
| CAM_GPIO
| GPIO4_C1
| CIF_CLKIN
| EBC_SDCLK
| GMAC1_MCLKINOUT_M1
| UART1_CTSn_M1
| I2S2_SCLK_RX_M1
|-
| 35
| GPIO11/SPI0_SCLK/VID7
| SPI3_CLK_M0
| GPIO4_B3
| I2C4_SCL_M0
| EBC_GDOE
| ETH1_REFCLKO_25M_M1
| SPI3_CLK_M0
| I2S2_SDO_M1
|-
| 36
| GPIO31/RTS2/PCM_DOUT
| WL_NDIS
| GPIO4_B6
| CIF_HREF
| EBC_SDLE
| GMAC1_MDC_M1
| UART1_RTSn_M1
| I2S2_MCLK_M1
|-
| 37
| GND
| GND
| GND
|
|
|
|
|
|-
| 38
| GND
| GND
| GND
|
|
|
|
|
|-
| 39
| GPIO0-27_VREF
| GPIO0-27_VREF
| 3V3/1V8
|
|
|
|
|
|-
| 40
| GPIO0-27_VREF
| GPIO0-27_VREF
| 3V3/1V8
|
|
|
|
|
|-
| 41
| GPIO28-45_VREF
| GPIO28-45_VREF
| 3V3/1V8
|
|
|
|
|
|-
| 42
| GPIO28-45_VREF
| GPIO28-45_VREF
| 3V3/1V8
|
|
|
|
|
|-
| 43
| GND
| GND
| GND
|
|
|
|
|
|-
| 44
| GND
| GND
| GND
|
|
|
|
|
|-
| 45
| GPIO12/PWM0/VID8/ARM_TMS
| PMW0_M0
| GPIO0_B7
| PWM0_M0
| CPUAVS
|
|
|
|-
| 46
| GPIO32/TXD2/GPCLK0
| PDM_CLK0_M1
| GPIO3_D6
| CIF_D8
| EBC_SDDO8
| GMAC1_TXD2_M1
| UART1_TX_M1
| PDM_CLK0_M1
|-
| 47
| GPIO13/PWM1/VID9/ARM_TCK
| PWM11
| GPIO4_C0
| CIF_CLKOUT
| EBC_GDCLK
| PWM11_IR_M1
|
|
|-
| 48
| GPIO33/RXD2
| PDM_SDIO_M1
| GPIO3_D7
| CIF_D9
| EBC_SDDO9
| GMAC1_TXD3_M1
| UART1_RX_M1
| PDM_SDI0_M1
|-
| 49
| GND
| GND
| GND
|
|
|
|
|
|-
| 50
| GND
| GND
| GND
|
|
|
|
|
|-
| 51
| GPIO14/TXD1/VID10
| UART2_TX
| GPIO0_D1
| UART2_TX_M0
|
|
|
|
|-
| 52
| GPIO34/GPCLK0/SD1_CLK
| I2S1_SDI1_M1
| GPIO3_D3
| CIF_D5
| EBC_SDDO5
| SDMMC2_CLK_M0
| I2S1_SDI1_M1
| VOP_BT656_D5_M1
|-
| 53
| GPIO15/RXD1/VID11
| UART2_RX
| GPIO0_D0
| UART2_RX_M0
|
|
|
|
|-
| 54
| GPIO35/SPI0_CE1/SD1_CMD
| I2S1_SDI0_M1
| GPIO3_D2
| CIF_D4
| EBC_SDDO4
| SDMMC2_CMD_M0
| I2S1_SDI0_M1
| VOP_BT656_D4_M1
|-
| 55
| GND
| GND
| GND
|
|
|
|
|
|-
| 56
| GND
| GND
| GND
|
|
|
|
|
|-
| 57
| GPIO16/CTS1/SPI1_CE2
| PDM_SDI2_M1
| GPIO4_A2
| CIF_D12
| EBC_SDDO12
| GMAC1_RXD3_M1
| UART7_TX_M2
| PDM_SDI2_M1
|-
| 58
| GPIO36/SPI0_CE0/SD1_DAT0
| I2S1_MCLK_M1
| GPIO3_C6
| CIF_D0
| EBC_SDDO0
| SDMMC2_D0_M0
| I2S1_MCLK_M1
| VOP_BT656_D0_M1
|
|-
| 59
| GPIO17/RTS1/SPI1_CE1
| PDM_SDI3_M1
| GPIO4_A3
| CIF_D13
| EBC_SDDO13
| GMAC1_RXCLK_M1
| UART7_RX_M2
| PDM_SDI3_M1
|-
| 60
| GPIO37/SPI0_MISO/SD1_DAT1
| I2S1_SCLK_TX_M1
| GPIO3_C7
| VOP_BT656_D1_M1
| I2S1_SCLK_TX_M1
| SDMMC2_D1_M0
| EBC_SDDO1
| CIF_D1
|-
| 61
| GND
| GND
| GND
|
|
|
|
|
|-
| 62
| GND
| GND
| GND
|
|
|
|
|
|-
| 63
| GPIO18/PCM_CLK/SPI1_CE0
| SPI1_CS0_M1
| GPIO3_A1
| VOP_BT1120_D0
| SPI1_CS0_M1
| SDMMC2_D0_M1
|
|
|-
| 64
| GPIO38/SPI0_MOSI/SD1_DAT2
| I2S1_LRCK_TX_M1
| GPIO3_D0
| CIF_D2
| EBC_SDDO2
| SDMMC2_D2_M0
| I2S1_LRCK_TX_M1
| VOP_BT656_D2_M1
|-
| 65
| GPIO19/PCM_FS/SPI1_MISO
| SPI1_MISO_M1
| GPIO3_C2
| VOP_BT1120_D14
| SPI1_MISO_M1
| UART5_TX_M1
| I2S1_SDO3_M2
|
|-
| 66
| GPIO39/SPI0_SCLK/SD1_DAT3
| I2S1_SDO0_M1
| GPIO3_D1
| CIF_D3
| EBC_SDDO3
| SDMMC2_D3_M0
| I2S1_SDO0_M1
| VOP_BT656_D3_M1
|-
| 67
| GND
| GND
| GND
|
|
|
|
|
|-
| 68
| GND
| GND
| GND
|
|
|
|
|
|-
| 69
| GPIO20/PCM_DIN/SPI1_MOSI
| SPI1_MOSI_M1
| GPIO3_C1
| VOP_BT1120_D13
| SPI1_MOSI_M1
| PCIE20_PERSTn_M1
| I2S1_SDO2_M2
|
|-
| 70
| GPIO40/SPI2_MISO/SD1_DAT4/TXD3
| PI_NLED_ACTIVITY
| GPIO4_A4
| CIF_D14
| EBC_SDDO14
| GMAC1_TXD0_M1
| UART9_TX_M2
| I2S2_LRCK_TX_M1
|-
| 71
| GPIO21/PCM_DOUT/SPI1_SCLK
| SPI1_CLK_M1
| GPIO3_C3
| VOP_BT1120_D15
| SPI1_CLK_M1
| UART5_RX_M1
| I2S1_SCLK_RX_M2
|
|-
| 72
| GPIO41/SPI2_MOSI/SD1_DAT5/RXD3
| BT_NDIS
| GPIO4_A5
| CIF_D15
| EBC_SDDO15
| GMAC1_TXD1_M1
| UART9_RX_M2
| I2S2_LRCK_RX_M1
|-
| 73
| GND
| GND
| GND
|
|
|
|
|
|-
| 74
| GND
| GND
| GND
|
|
|
|
|
|-
| 75
| GPIO22/SD0_CLK/ARM_TRST
| PDM_CLK1_M1
| GPIO4_A0
| CIF_D10
| EBC_SDDO10
| GMAC1_TXCLK_M1
| PDM_CLK1_M1
|
|-
| 76
| GPIO42/SPI2_SCLK/SD1_DAT6/RTS3
| I2S1_SDO2_M1
| GPIO4_B1
| ISP_PRELIGHT_TRIG
| EBC_SDCE3
| GMAC1_RXDV_CRS_M1
| I2S1_SDO2_M1
|
|-
| 77
| GPIO23/SD0_CMD/ARM_RTCK
| SPI0_CS1_M0
| GPIO0_C4
| PWM5
| SPI0_CS1_M0
| UART0_RTSn
|
|
|-
| 78
| GPIO43/SPI2_CE0/SD1_DAT7/CTS3
| 24C02_WP
| GPIO0_C0
| PWM1_M0
| GPUAVS
| UART0_RX
|
|
|-
| 79
| GND
| GND
| GND
|
|
|
|
|
|-
| 80
| GND
| GND
| GND
|
|
|
|
|
|-
| 81
| GPIO24/SD0_DAT0/ARM_TDO
| SPI0_CSO_MO
| GPIO0_C6
| PWM7_IR
| SPI0_CS0_M0
|
|
|
|-
| 82
| GPIO44/GPCLK2/SDA3/SPI2_CE1
| PDM_SDI1_M1
| GPIO4_A1
| CIF_D11
| EBC_SDDO11
| GMAC1_RXD2_M1
| PDM_SDI1_M1
|
|-
| 83
| GPIO25/SD0_DAT1/ARM_TCK
| SPI0_MISO_MO
| GPIO0_C5
| PWM6
| SPI0_MISO_M0
|
|
|
|-
| 84
| GPIO45/PWM2/SCL3/SPI2_CE2
| PMW0_M1
| GPIO0_C7
| HDMITX_CEC_M1
| PWM0_M1
| UART0_CTSn
|
|
|-
| 85
| GND
| GND
| GND
|
|
|
|
|
|-
| 86
| GND
| GND
| GND
|
|
|
|
|
|-
| 87
| GPIO26/SD0_DAT2/ARM_TDI
| I2C2_SDA_MO
| GPIO0_B6
| I2C2_SDA_M0
| SPI0_MOSI_M0
| PCIE20_PERSTn_M0
| PWM2_M1
|
|-
| 88
| SDA4/HDMI_HPD_P
| HDMI_TX_HPD_PORT
| HDMI_TX_HPDIN
|
|
|
|
|
|-
| 89
| GPIO27/SD0_DAT3/ARM_TMS
| I2C2_SCL_MO
| GPIO0_B5
| I2C2_SCL_M0
| SPI0_CLK_M0
| PCIE20_WAKEn_M0
| PWM1_M1
|
|-
| 90
| SCL4/SD3_CARD_DET
| NC
|
|
|
|
|
|
|-
| 91
| GND
| GND
| GND
|
|
|
|
|
|-
| 92
| GND
| GND
| GND
|
|
|
|
|
|-
| 93
| DSI0_DN1
| MIPI_DSI_TX1_D1N
| MIPI_DSI_TX1_D1N
|
|
|
|
|
|-
| 94
| DSI1_DP0
| MIPI_DSI_TX0_D0P/LVDS_TX0_D0P
| MIPI_DSI_TX0_D0P
| LVDS_TX0_D0P
|
|
|
|
|-
| 95
| DSI0_DP1
| MIPI_DSI_TX1_D1P
| MIPI_DSI_TX1_D1P
|
|
|
|
|
|-
| 96
| DSI1_DN0
| MIPI_DSI_TX0_D0N/LVDS_TX0_D0N
| MIPI_DSI_TX0_D0N
| LVDS_TX0_D0N
|
|
|
|
|-
| 97
| GND
| GND
| GND
|
|
|
|
|
|-
| 98
| GND
| GND
| GND
|
|
|
|
|
|-
| 99
| DSI0_DN0
| MIPI_DSI_TX1_D0N
| MIPI_DSI_TX1_D0N
|
|
|
|
|
|-
| 100
| DSI1_CP
| MIPI_DSI_TX0_CLKP/LVDS_TX0_CLKP
| MIPI_DSI_TX0_CLKP
| LVDS_TX0_CLKP
|
|
|
|
|-
| 101
| DSI0_DP0
| MIPI_DSI_TX1_D0P
| MIPI_DSI_TX1_D0P
|
|
|
|
|
|-
| 102
| DSI1_CN
| MIPI_DSI_TX0_CLKN/LVDS_TX0_CLKN
| MIPI_DSI_TX0_CLKN
| LVDS_TX0_CLKN
|
|
|
|
|-
| 103
| GND
| GND
| GND
|
|
|
|
|
|-
| 104
| GND
| GND
| GND
|
|
|
|
|
|-
| 105
| DSI0_CN
| MIPI_DSI_TX1_CLKN
| MIPI_DSI_TX1_CLKN
|
|
|
|
|
|-
| 106
| DSI1_DP3
| MIPI_DSI_TX0_D3P/LVDS_TX0_D3P
| MIPI_DSI_TX0_D3P
| LVDS_TX0_D3P
|
|
|
|
|-
| 107
| DSI0_CP
| MIPI_DSI_TX1_CLKP
| MIPI_DSI_TX1_CLKP
|
|
|
|
|
|-
| 108
| DSI1_DN3
| MIPI_DSI_TX0_D3N/LVDS_TX0_D3N
| MIPI_DSI_TX0_D3N
| LVDS_TX0_D3N
|
|
|
|
|-
| 109
| GND
| GND
| GND
|
|
|
|
|
|-
| 110
| GND
| GND
| GND
|
|
|
|
|
|-
| 111
| HDMI_CK_N
| HDMI_TXCLKN_PORT
| HDMI_TX_CLKN
|
|
|
|
|
|-
| 112
| DSI1_DP2
| MIPI_DSI_TX0_D2P/LVDS_TX0_D2P
| MIPI_DSI_TX0_D2P
| LVDS_TX0_D2P
|
|
|
|
|-
| 113
| HDMI_CK_P
| HDMI_TXCLKP_PORT
| HDMI_TX_CLKP
|
|
|
|
|
|-
| 114
| DSI1_DN2
| MIPI_DSI_TX0_D2N/LVDS_TX0_D2N
| MIPI_DSI_TX0_D2N
| LVDS_TX0_D2N
|
|
|
|
|-
| 115
| GND
| GND
| GND
|
|
|
|
|
|-
| 116
| GND
| GND
| GND
|
|
|
|
|
|-
| 117
| HDMI_D0_N
| HDMI_TX0N_PORT
| HDMI_TX_D0N
|
|
|
|
|
|-
| 118
| DSI1_DP1
| MIPI_DSI_TX0_D1P/LVDS_TX0_D1P
| MIPI_DSI_TX0_D1P
| LVDS_TX0_D1P
|
|
|
|
|-
| 119
| HDMI_D0_P
| HDMI_TX0P_PORT
| HDMI_TX_D0P
|
|
|
|
|
|-
| 120
| MIPI_DSI_TX0_D1N/LVDS_TX0_D1N
| MIPI_DSI_TX0_D1N
| LVDS_TX0_D1N
|
|
|
|
|
|-
| 121
| GND
| GND
| GND
|
|
|
|
|
|-
| 122
| GND
| GND
| GND
|
|
|
|
|
|-
| 123
| HDMI_D1_N
| HDMI_TX1N_PORT
| HDMI_TX_D1N
|
|
|
|
|
|-
| 124
| NC
| PCIE20_RXP
| PCIE20_RXP
| SATA2_RXP
|
|
|
|
|-
| 125
| HDMI_D1_P
| HDMI_TX1P_PORT
| HDMI_TX_D1P
|
|
|
|
|
|-
| 126
| NC
| PCIE20_RXN
| PCIE20_RXN
| SATA2_RXN
|
|
|
|
|-
| 127
| GND
| GND
| GND
|
|
|
|
|
|-
| 128
| NC
| GND
| GND
|
|
|
|
|
|-
| 129
| HDMI_D2_N
| HDMI_TX2N_PORT
| HDMI_TX_D2N
|
|
|
|
|
|-
| 130
| NC
| PCIE20_TXP
| PCIE20_TXP
| SATA2_TXP
|
|
|
|
|-
| 131
| HDMI_D2_P
| HDMI_TX2P_PORT
| HDMI_TX_D2P
|
|
|
|
|
|-
| 132
| NC
| PCIE20_TXN
| PCIE20_TXN
| SATA2_TXN
|
|
|
|
|-
| 133
| GND
| GND
| GND
|
|
|
|
|
|-
| 134
| GND
| GND
| GND
|
|
|
|
|
|-
| 135
| CAM1_DP3
| NC
| NC
|
|
|
|
|
|-
| 136
| CAM0_DP0
| MIPI_CSI_RX_D2P
| MIPI_CSI_RX_D2P
|
|
|
|
|
|-
| 137
| CAM1_DN3
| NC
| NC
|
|
|
|
|
|-
| 138
| CAM0_DN0
| MIPI_CSI_RX_D2N
| MIPI_CSI_RX_D2N
|
|
|
|
|
|-
| 139
| GND
| GND
| GND
|
|
|
|
|
|-
| 140
| GND
| GND
| GND
|
|
|
|
|
|-
| 141
| CAM1_DP2
| NC
| NC
|
|
|
|
|
|-
| 142
| CAM0_CP
| MIPI_CSI_RX_CLK1P
| MIPI_CSI_RX_CLK1P
|
|
|
|
|
|-
| 143
| CAM1_DN2
| NC
| NC
|
|
|
|
|
|-
| 144
| CAM0_CN
| MIPI_CSI_RX_CLK1N
| MIPI_CSI_RX_CLK1N
|
|
|
|
|
|-
| 145
| GND
| GND
| GND
|
|
|
|
|
|-
| 146
| GND
| GND
| GND
|
|
|
|
|
|-
| 147
| CAM1_CP
| MIPI_CSI_RX_CLK0P
| MIPI_CSI_RX_CLK0P
|
|
|
|
|
|-
| 148
| CAM0_DP1
| MIPI_CSI_RX_D3P
| MIPI_CSI_RX_D3P
|
|
|
|
|
|-
| 149
| CAM1_CN
| MIPI_CSI_RX_CLK0N
| MIPI_CSI_RX_CLK0N
|
|
|
|
|
|-
| 150
| CAM0_DN1
| MIPI_CSI_RX_D3N
| MIPI_CSI_RX_D3N
|
|
|
|
|
|-
| 151
| GND
| GND
| GND
|
|
|
|
|
|-
| 152
| GND
| GND
| GND
|
|
|
|
|
|-
| 153
| CAM1_DP1
| MIPI_CSI_RX_D1P
| MIPI_CSI_RX_D1P
|
|
|
|
|
|-
| 154
| NC
| PCIE20_REFCLKP
| PCIE20_REFCLKP
|
|
|
|
|
|-
| 155
| CAM1_DN1
| MIPI_CSI_RX_D1N
| MIPI_CSI_RX_D1N
|
|
|
|
|
|-
| 156
| NC
| PCIE20_REFCLKN
| PCIE20_REFCLKN
|
|
|
|
|
|-
| 157
| GND
| GND
| GND
|
|
|
|
|
|-
| 158
| NC
| GND
| GND
|
|
|
|
|
|-
| 159
| CAM1_DP0
| MIPI_CSI_RX_D0P
| MIPI_CSI_RX_D0P
|
|
|
|
|
|-
| 160
| NC
| PCIE20_CLKREQn_M2
| GPIO1_B0
| I2S1_SDO1_M0
| I2S1_SDI3_M0
| PDM_SDI3_M0
| PCIE20_CLKREQn_M2
|
|-
| 161
| CAM1_DN0
| MIPI_CSI_RX_D0N
| MIPI_CSI_RX_D0N
|
|
|
|
|
|-
| 162
| NC
| TF_DET_H
| TF_DET_H
|
|
|
|
|
|-
| 163
| GND
| GND
| GND
|
|
|
|
|
|-
| 164
| GND
| GND
| GND
|
|
|
|
|
|-
| 165
| USB_DP
| USB_OTG0_DP
| USB_OTG0_DP
|
|
|
|
|
|-
| 166
| TVDAC
| SARADC_IN3
| SARADC_VIN3
|
|
|
|
|
|-
| 167
| USB_DM
| USB_OTG0_DM
| USB_OTG0_DM
|
|
|
|
|
|-
| 168
| USB_OTGID
| USB_OTG0_ID
| USB_OTG0_ID
|
|
|
|
|
|-
| 169
| GND
| GND
| GND
|
|
|
|
|
|-
| 170
| GND
| GND
| GND
|
|
|
|
|
|-
| 171
| HDMI_CEC
| HDMI_TX_CEC_PORT
| GPIO4_D1
| HDMITX_CEC_M0
| SPI3_CS1_M1
|
|
|
|-
| 172
| VC_TRST_N
| PMW4
| GPIO0_C3
| PWM4
| VOP_PWM_M0
| MCU_JTAG_TRSTn
|
|
|-
| 173
| HDMI_SDA
| HDMI_TXDDC_SDA_PORT
| GPIO4_D0
| HDMITX_SDA
| I2C5_SDA_M1
|
|
|
|-
| 174
| VC_TDI
| GPIO_C1
| GPIO0_C1
| PWM2_M0
| NPUAVS
| UART0_TX
| MCU_JTAG_TDI
|
|-
| 175
| HDMI_SCL
| HDMI_TXDDC_SCL_PORT
| HDMITX_SCL
| I2C5_SCL_M1
|
|
|
|
|-
| 176
| VC_TMS
| PWM3_IR
| GPIO0_C2
| PWM3_IR
| EDP_HPDIN_M1
| MCU_JTAG_TMS
|
|
|-
| 177
| RUN
| PWRON_KEY
| PWRON_KEY
|
|
|
|
|
|-
| 178
| VC_TDO
| 4G_DISABLE
| GPIO4_C5
| PWM12_M1
| SPI3_MISO_M1
| SATA1_ACT_LED
| UART9_TX_M1
| I2S3_SDO_M1
|-
| 179
| VDD_CORE
| NC
| NC
|
|
|
|
|
|-
| 180
| VC_TCK
| HP_DET_L
| GPIO4_C6
| PWM13_M1
| SPI3_CS0_M1
| SATA0_ACT_LED
| UART9_RX_M1
| I2S3_SDI_M1
|-
| 181
| GND
| GND
| GND
|
|
|
|
|
|-
| 182
| GND
| GND
| GND
|
|
|
|
|
|-
| 183
| CM_1V8
| NC
| NC
|
|
|
|
|
|-
| 184
| CM_1V8
| NC
| NC
|
|
|
|
|
|-
| 185
| CM_1V8
| NC
| NC
|
|
|
|
|
|-
| 186
| CM_1V8
| NC
| NC
|
|
|
|
|
|-
| 187
| GND
| GND
| GND
|
|
|
|
|
|-
| 188
| GND
| GND
| GND
|
|
|
|
|
|-
| 189
| CM_VDAC
| NC
| NC
|
|
|
|
|
|-
| 190
| CM_VDAC
| NC
| NC
|
|
|
|
|
|-
| 191
| CM_3V3
| NC
| NC
|
|
|
|
|
|-
| 192
| CM_3V3
| NC
| NC
|
|
|
|
|
|-
| 193
| CM_3V3
| NC
| NC
|
|
|
|
|
|-
| 194
| CM_3V3
| NC
| NC
|
|
|
|
|
|-
| 195
| GND
| GND
| GND
|
|
|
|
|
|-
| 196
| GND
| GND
| GND
|
|
|
|
|
|-
| 197
| CM_VBAT
| 5V_INPUT
| 5V
|
|
|
|
|
|-
| 198
| CM_VBAT
| 5V_INPUT
| 5V
|
|
|
|
|
|-
| 199
| CM_VBAT
| 5V_INPUT
| 5V
|
|
|
|
|
|-
| 200
| CM_VBAT
| 5V_INPUT
| 5V
|
|
|
|
|
|}

File:Start 5a.png

2023-03-09T02:18:21Z

Melo: Melo uploaded a new version of "File:Start 5a.png"

File:Start 5a.png

2023-03-06T07:06:33Z

Melo: Melo uploaded a new version of "File:Start 5a.png"

File:Start 5a.png

2023-03-06T06:59:58Z

Melo: Melo uploaded a new version of "File:Start 5a.png"

File:Start 5a.png

2023-03-06T06:50:14Z

Melo: Melo uploaded a new version of "File:Start 5a.png"

File:Start 5a.png

2023-03-06T06:49:35Z

Melo:

Rock5/5b/power supply

2022-11-24T04:04:17Z

Melo:

{{rock5_header}}
{{Languages|rock5/5b/power_supply}}

[[rock5 | ROCK 5]] > [[Rock5/5b | ROCK 5 Model B]] > [[Rock5/5b/power_supply | Power Supply]]

__TOC__

ROCK 5B implements the USB C PD as the main power source, The USB Power Delivery (USB PD) enables the maximum functionality of USB by providing more flexible power delivery along with data over a single cable.

Supported Power Adapters
{| class="wikitable"
|-
! Type
! Capability<br />
! Images
! Note
|-
| Anker A2663
| 5V/3A,9V/3A,15V/3A,20V/3.25A
| Debian11
|
|-
| Anker A2718
| 5V/3A,9V/3A,15V/3A,20V/3.25A
| Debian11
| Anker single port 65w and AENZR six-in-one expansion dock
|-
| Anker A2633
| 5V/3A,9V/2.22A
| Armbian
|
|-
| Anker A2148
| USBC1-C2:5V/3A,9V/3A,15V/3A，20V/5A.USB-A 4.5V/5A,5V/4.5A,5V/3A,9V/2A
| Other
| ubuntu-focal-server-arm64 EMMC starts normally, ssh is normal
|-
| ALLNET PD 65W
| USB-C 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A
| Debian11
| spi+nvme available
|-
| Apple 18W USB-C
| 5V/3A,9V/2A
| style="vertical-align:middle;" | Debian11
|
|-
| Apple 20W USB-C
| 5V/3A,9V/2.22A
| Other
|
|-
| Apple 96W USB-C
| 20.5V/4.7A,15V/3A,9V/3A,5.2V/3A
| Debian11
|
|-
| AUKEY 65W PA-B4
| 5V 3A/9V 2A/12V 1.5A
| Debian11
|
|-
| Baseus CCXFK20C
| 5V/3A,9V/2.22A,12V/1.67A
| Armbian
|
|-
| Baseus CCGAN65C5
| Type-C1/Type-C2 Output: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A Max.
| Debian11
| It needs to be restarted several times, and it cannot be shut down or restarted under debian. I don't know if it is related to the PD agreement. Normal under Ubuntu Server.
|-
| Baseus CCGAN65-1ACC
| Type-C1/Type-C2 output: 5V/9V/12V/15V=3/20V= 3.25A
| Debian11
|
|-
| Baseus CCGAN120C
| Type-C1/Type-C2:20V/5A,5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A 100W Max.
| Debian11
|
|-
| HUAWEI HW-200325CP0
| 5V/2V、9V/2V、12V/2A、15V/3A、20V/3.25A
| Debian11
| When SD card and mvme coexist, only nvme startup is supported
|-
| HUAWEI HW-100400C00
| 5V/2V、9V/2V、10V/4A
| Debian11
| When SD card and mvme coexist, stuck in infinite boot loop
|-
| HUAWEI HW-100225C00
| 5V/2V、9V/2V
| Debian11
|
|-
| Smartisan DP65C
| 5V/3A、9V/3A、12V/3A、15V/3A、20V/3.25A
| Armbian
|
|-
| ZMIQB822
| 5V/3A、9V/3A、12V/2.25A、15V/1.5A
| Armbian
|
|-
| ZMIHA712
| 5V/3A、9V/3A、12V/3A、15V/3A、20V/3.25A
| Debian11
|
|-
| ZMICXP01
| 5V/3A、9V/3A、12V/3A、15V/3A、20V/3.25A
| Armbian
|
|-
| CHOETECH Q5004-CN-CLBK
| 12V1.5A
| Armbian
|
|-
| MI MDY-11-EX
| 5V/3A,9V/3A,12V/2.25A,20V/1.35A,10V/3A
| Debian11
|
|-
| MI MDY-12-EF
| 5-20V/6.2-3.25A（67W Max）
| Armbian
|
|-
| MI MDY-08-EH
| 5V/2.5A,9V/2A,12V/1.5A
| Debian11
|
|-
| MI MDY-11-EF
| 5V/3A,9V/3A,12V/2.25A,20V/1.35A,10V/3A
| Debian11
|
|-
| NUBIA nb-a1150a
| QC:5V/3A,9V/3A,12V/2.5A.PD:5V/3A,9V/3A,12V/3A.15V/3A
| Debian11
|
|-
| PHILIPS PD 20W
| 12V/1.5A
| Debian11
| TF starts normally, others have not been tested
|-
| Mcdodo CH-790
| USB-C：3.3-20V⎓3A, 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓2.25A 45W Max
| Debian11
|
|-
| Mcdodo CH-791
| USB-C1: 3.3-20V/3A,5V/3A,9V/3A,12V/3A,15V/3A,20V/3.25A Max.USB-C2: 3.3-11V/2.7A,5V/3A,9V/3A,12V/2.5A,15V/2A,20V/1.5A Max.
| Debian11
|
|-
| LENOVO thinkplus GAN65
| 5V/3A.9V/3A.12V/3A.15V/3A.20V/3.25A
| Debian11
| Loud whistling noise.There is a user needing a decoy line for this to work
|-
| LENOVO 40AF0135CN
| Hybrid USB-C with USB-A Dock
| Armbian
| spi and nvme available
|-
| LENOVO YOGA CC65
| USB-C1:5V/3A.9V/3A.12V/3A.15V/3A.20V/3.25A.USB-C2:5V/3A.9V/3A.12V/1.5A.
| Armbian
| TF starts normally, others have not been tested
|-
| SW3518s Module
| 12V
| Debian11
|
|-
| IP6518 Module
| 12V
| Debian11
|
|-
| Ifory 33W
| 5V/3A.9V/3A.12V/2.5A.15V/2A.20V/1.5A
| Armbian
|
|-
| RPI4B 15W
| 5V
| Debian11
|
|-
| WEOFUN GAN01
| USB-C1:5V/3A.9V/3A.12V/3A.20V/3.25A.USB-C2:3.3-11V/5A.5V/3A.9V/3A.12V/3A.15V/3A.20V/3.25A
| Debian11
|
|-
| Sharge S90
| 4.5V/5A,5V/4.5A,9V/3A,12V/3A,20V/3A
| Armbian
|
|-
| PISEN TS-C135
| 5V/3A,9V/2.22A,12V/1.5A
| Debian11
|
|-
| WITRN P3B
| 12V
| Debian11
|
|}

Unsupported power adapter

{| class="wikitable"
|-
! Type
! Capability<br />
! Images
! Note
|-
| One plus 8T comes with 65W adapter
| -
| Debian11
| blue light off
|-
| HP Notebook 65W Adapter
| -
| Debian11
| blue light off
|-
| Baseus GaN 65W fast charge (first generation)
| -
| Debian11
| It needs to be restarted several times, and it cannot be shut down or restarted under debian. I don't know if it is related to the PD agreement. Normal under Ubuntu Server
|-
| QD-188PD
| -
| Debian11
| infinite restart
|-
| LEVI27w ev-24acn
| -
| Debian11
| infinite restart.The charging head does not have a 12V gear
|-
| mipad 5pro 5g
| MDY-12-EF（67w type-A）
| Debian11
| infinite restart
|-
| MI-GAN65W
| -
| Debian11
| Insert hdmi to restart infinitely, after removing hdmi, the probability of successful startup can be improved
|-
| SONY PD18W (9V2A)
| -
| Debian11
| Green is short and blue is long.infinite restart
|-
| MI-MDY-08-EH
| 18w type-A
| Debian11
| cat supports_usb_power_delivery command shows no, sensors command shows 5v input voltage.When the load is high, it will automatically restart
|-
| Nintendo Switch power supply
| -
| Debian11
| Overload protection, unusable
|-
| iPad3 Apple power supply
| 10W (5.1V2.1A)
| Debian11
| Green is short and blue is long, there is no sign of restarting, but it keeps looping and does not start
|-
| ZMIHA832
| -
| Other
|
|-
| Lumdoo 57W PD(S-TR-141)
| -
| Armbian
| Green is short and blue is long.infinite restart
|-
| Apple 61W USB-C
| Macbook Pro
| Debian11
| infinite restart
|-
| DELL U2720QM PD90W
| -
| Debian 11
| infinite restart
|-
| Anker PD 65W
| -
| Debian 11
| infinite restart
|
|-
| OnePlus Dash
| 5V 4A
| Debian 11
| infinite restart
|
|}

Rock5/5b/power supply

2022-11-24T02:36:54Z

Melo:

Rock5/5b/power supply

2022-11-24T02:36:20Z

Melo:

Rock5/5b/power supply

2022-11-24T02:35:42Z

Melo:

Rock5/5b/power supply

2022-11-24T02:16:52Z

Melo:

Rock5/5b/power supply

2022-11-23T13:28:51Z

Melo:

Rock5/5b/power supply

2022-11-23T12:46:17Z

Melo:

Rock5/5b/power supply

2022-11-23T12:37:14Z

Melo:

Rock3/dev/install-docker-engineer-on-docker

2022-07-14T07:36:02Z

Melo:

{{rock3_header}}

{{Languages|rock3/dev/install-docker-engineer-on-docker}}

=== 1.Install Docker Engine on Debian ===
0 Uninstall old versions
sudo apt-get remove docker docker-engine docker.io containerd runc
1 Install using the repository.Update the apt package index and install packages to allow apt to use a repository over HTTPS:
sudo apt-get update
sudo apt-get install \
ca-certificates \
curl \
gnupg \
lsb-release
2 Add Docker’s official GPG key:
sudo mkdir -p /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/debian/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
3 Use the following command to set up the repository:
echo \
"deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian \
$(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
4 Install Docker Engine
sudo apt-get update
sudo apt-get install docker-ce docker-ce-cli containerd.io docker-compose-plugin
5 The docker installer uses iptables for nat. Unfortunately Debian uses nftables. You can convert the entries over to nftables or just setup Debian to use the legacy iptables.
sudo update-alternatives --set iptables /usr/sbin/iptables-legacy
sudo update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy
sudo service docker start
=== 2 Test Docker===
sudo docker run hello-world
=== 3 Check docker service status ===

sudo systemctl status docker

And it shows this.
● docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: e
Active: active (running) since Thu 2022-07-14 15:24:57 UTC; 4min 48s ago
Docs: https://docs.docker.com
Main PID: 5632 (dockerd)
Tasks: 10
Memory: 37.4M
CGroup: /system.slice/docker.service
└─5632 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/contain

Rock3/dev/install-docker-engineer-on-docker

2022-07-14T07:32:25Z

Melo:

{{rock3_header}}

{{Languages|rock3/dev/install-docker-engineer-on-docker}}

=== 1.Install Docker Engine on Debian ===
0 Uninstall old versions
sudo apt-get remove docker docker-engine docker.io containerd runc
1 Install using the repository.Update the apt package index and install packages to allow apt to use a repository over HTTPS:
sudo apt-get update
sudo apt-get install \
ca-certificates \
curl \
gnupg \
lsb-release
2 Add Docker’s official GPG key:
sudo mkdir -p /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/debian/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
3 Use the following command to set up the repository:
echo \
"deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian \
$(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
4 Install Docker Engine
sudo apt-get update
sudo apt-get install docker-ce docker-ce-cli containerd.io docker-compose-plugin
5 The docker installer uses iptables for nat. Unfortunately Debian uses nftables. You can convert the entries over to nftables or just setup Debian to use the legacy iptables.
sudo update-alternatives --set iptables /usr/sbin/iptables-legacy
sudo update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy
sudo service docker start
=== 2 Test Docker===
sudo docker run hello-world
=== 2 Check docker service status ===

sudo systemctl status docker

And it shows this.
● docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: e
Active: active (running) since Thu 2022-07-14 15:24:57 UTC; 4min 48s ago
Docs: https://docs.docker.com
Main PID: 5632 (dockerd)
Tasks: 10
Memory: 37.4M
CGroup: /system.slice/docker.service
└─5632 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/contain

Rock3/dev/install-docker-engineer-on-docker

2022-07-14T07:31:30Z

Melo:

{{rock3_header}}

{{Languages|rock3/dev/install-docker-engineer-on-docker}}

=== 0.Uninstall old versions ===

sudo apt-get remove docker docker-engine docker.io containerd runc

=== 1.Install Docker Engine on Debian ===
1 Install using the repository.Update the apt package index and install packages to allow apt to use a repository over HTTPS:
sudo apt-get update
sudo apt-get install \
ca-certificates \
curl \
gnupg \
lsb-release
2 Add Docker’s official GPG key:
sudo mkdir -p /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/debian/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
3 Use the following command to set up the repository:
echo \
"deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian \
$(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
4 Install Docker Engine
sudo apt-get update
sudo apt-get install docker-ce docker-ce-cli containerd.io docker-compose-plugin
5 The docker installer uses iptables for nat. Unfortunately Debian uses nftables. You can convert the entries over to nftables or just setup Debian to use the legacy iptables.
sudo update-alternatives --set iptables /usr/sbin/iptables-legacy
sudo update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy
sudo service docker start
=== 2 Test Docker===
sudo docker run hello-world
=== 2 Check docker service status ===

sudo systemctl status docker

And it shows this.
● docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: e
Active: active (running) since Thu 2022-07-14 15:24:57 UTC; 4min 48s ago
Docs: https://docs.docker.com
Main PID: 5632 (dockerd)
Tasks: 10
Memory: 37.4M
CGroup: /system.slice/docker.service
└─5632 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/contain