Radxa Wiki - User contributions [en]

RockpiS/hardware/gpio

2025-09-16T12:13:33Z

Hipboi: /* 26-pin Header 2 */

{{rockpiS_header}}
{{Languages|rockpi4/hardware/gpio}}

[[rockpiS | ROCK Pi S]] > [[rockpiS/hardware | Hardware]] > [[rockpiS/hardware/gpio | GPIO]]

__NOTOC__

== <span id="gpio">General purpose input-output (GPIO) connector</span> ==

ROCK Pi S has two 26-pin expansion header. Each pin is distinguished by color, pin name and location are named as bellow.
[[File:Rockpis_top-latest.jpg | 500px | left]]

<div class="col-md-12 ">
<div class="panel panel-midnight-white">
<div class="panel-heading"><h3>Hardware V10</h3></div>
<div class="panel-body">

==== 26-pin Header 1 ====

{| class="mw-collapsible mw-collapsed wikitable"
! GPIO number || Func4 || Func3 || Func2 || Func1 || Pin# || || Pin# || Func1 || Func2 || Func3 || Func4 || GPIO number
|-
| || || || || +3.3V || style="background:yellow"| 1 || ||style="background:red"| 2 || +5.0V || || ||| ||
|-
| 12 || || || I2C1_SCL || GPIO0_B4 || style="background:green; color:white"| 3 || || style="background:red"| 4 || +5.0V || || || ||
|-
| 11 || || || I2C1_SDA || GPIO0_B3 || style="background:green; color:white"| 5 || || style="background:black; color:white"| 6 || GND || || || ||
|-
| 69 || || || I2S0_SCLK_TX || GPIO2_A5 || style="background:green; color:white"| 7 || || style="background:green; color:white"| 8 || GPIO4_D3 || SDMMC_D3 || UART2_TX_M1 || PMU_ST3 || 155
|-
| 64 || || SPI0_MISO || style="background:orange"| UART0_RX || GPIO2_A0 || style="background:green; color:white"| 9 || || style="background:green; color:white"|10 || GPIO4_D2 || SDMMC_D2 || UART2_RX_M1 || PMU_ST2 || 154
|-
| 65 || || SPI0_MOSI || style="background:orange"|UART0_TX || GPIO2_A1 || style="background:green; color:white"|11 || || style="background:green; color:white"|12 || GPIO0_C0 || PWM3 || I2C3_SCL_M0 || || 16
|-
| 66 || I2C2_SDA || SPI0_CLK || UART0_CTSN || GPIO2_A2 || style="background:green; color:white"|13 || || style="background:black; color:white"|14 || GND || || || ||
|-
| 67 || I2C2_SCL || SPI0_CSN0 || UART0_RTSN || GPIO2_A3 || style="background:green; color:white"|15 || || style="background:green; color:white"|16 || GPIO2_A7 || I2S0_8CH_LRCK_TX || || || 71
|-
| || || || || +3.3V || style="background:yellow"|17 || || style="background:green; color:white"|18 || GPIO2_B1 || I2S0_8CH_SDO0 || || || 73
|-
| 55 || SPI2_MOSI || UART2_TX_M0 || UART1_RTSN || GPIO1_C7 || style="background:green; color:white"|19 || ||style="background:black; color:white"|20 || GND || || || ||
|-
| 54 || SPI2_MISO || UART2_RX_M0 || UART1_CTSN || GPIO1_C6 || style="background:green; color:white"|21 || || style="background:green; color:white"|22 || GPIO0_B6 || PWM1 || || || 14
|-
| 56 || SPI2_CLK || I2C0_SDA || UART1_RX || GPIO1_D0 || style="background:green; color:white"|23 || || style="background:green; color:white"|24 || GPIO1_D1 || UART1_TX || I2C0_SCL || SPI2_CSN0 || 57
|-
| || || || || GND || style="background:black; color:white"|25 || || style="background:green; color:white"|26 || GPIO0_B7 || PWM2 || I2C3_SDA_M0 || || 15
|}

'''Warning'''
* Pin#8 and Pin#10 cannot be used as GPIO, UART function pins since they are the data pins of SDMMC.

==== 26-pin Header 2 ====

{| class="mw-collapsible mw-collapsed wikitable"
! GPIO number || Func3 || Func2 || Func1 || Pin# || || Pin# || Func1 || Func2 || Func3 || GPIO number
|-
| || || || GND || style="background:black; color:white"| 27 || ||style="background:black; color:white"| 28 || GPIO2_A6 || I2S0_8CH_SCLK_RX || PDM_CLK_S_M2 ||| 70
|-
| || || || ADC_KEY_IN1 || style="background:black; color:white"| 29 || || style="background:black; color:white"| 30 || GPIO2_B5 || I2S0_8CH_SDI0 || PDM_SDI0_M2 || 77
|-
| || || || MICBIAS2 || style="background:black; color:white"| 31 || || style="background:black; color:white"| 32 || GPIO2_B6 || I2S0_8CH_SDI1 || PDM_SDI1_M2 || 78
|-
| || || || MICBIAS1 || style="background:black; color:white"| 33 || || style="background:black; color:white"| 34 || GPIO2_B7 || I2S0_8CH_SDI2 || PDM_SDI2_M2 || 79
|-
| || || || MICN8 || style="background:black; color:white"| 35 || || style="background:black; color:white"|36 || MCIP8 || || ||
|-
| || || || MICN7 || style="background:black; color:white"|37 || || style="background:black; color:white"|38 || MCIP7 || || ||
|-
| || || || MICN6 || style="background:black; color:white"|39 || || style="background:black; color:white"|40 || MCIP6 || || ||
|-
| || || || MICN5 || style="background:black; color:white"|41 || || style="background:black; color:white"|42 || MCIP5 || || ||
|-
| || || || MICN4 || style="background:black; color:white"|43 || || style="background:black; color:white"|44 || MCIP4 || || ||
|-
| || || || MICN3 || style="background:black; color:white"|45 || ||style="background:black; color:white"|46 || MCIP3 || || ||
|-
| || || || MICN2 || style="background:black; color:white"|47 || || style="background:black; color:white"|48 || MCIP2 || || ||
|-
| || || || MICN1 || style="background:black; color:white"|49 || || style="background:black; color:white"|50 || MCIP1 || || ||
|-
| || || || LINEOUT_R || style="background:black; color:white"|51 || || style="background:black; color:white"|52 || LINEOUT_L || || ||
|}
</div>
</div>
</div>

<div class="clearfix"></div>

==== More details about V10 Headers ====

* Pins marked with color orange are designed for default debug console.
* PWM: x3, PWM1/PWM2/PWM3
* SPI: x2, SPI0/SPI2
* I2C: x4, I2C0/I2C1/I2C2/I2C3
* UART: x3, UART0/UART1/UART2

<div class="col-md-12 ">
<div class="panel panel-midnight-white">
<div class="panel-heading"><h3>Hardware V11</h3></div>
<div class="panel-body">

==== 26-pin Header 1 ====

{| class="mw-collapsible mw-collapsed wikitable"
! GPIO number || Func4 || Func3 || Func2 || Func1 || Pin# || || Pin# || Func1 || Func2 || Func3 || Func4 || GPIO number
|-
| || || || || +3.3V || style="background:yellow"| 1 || ||style="background:red"| 2 || +5.0V || || ||| ||
|-
| 11 || || || I2C1_SDA || GPIO0_B3 || style="background:green; color:white"| 3 || || style="background:red"| 4 || +5.0V || || || ||
|-
| 12 || || || I2C1_SCL || GPIO0_B4 || style="background:green; color:white"| 5 || || style="background:black; color:white"| 6 || GND || || || ||
|-
| 69 || || || I2S0_SCLK_TX || GPIO2_A5 || style="background:green; color:white"| 7 || || style="background:green; color:white"| 8 || GPIO2_A1 || style="background:orange"|UART0_TX || SPI0_MOSI || || 65
|-
| || || || || GND || style="background:black; color:white"| 9 || || style="background:green; color:white"|10 || GPIO2_A0 || style="background:orange"|UART0_RX || SPI0_MISO || || 64
|-
| 15 || || I2C3_SDA_M0 || PWM2 || GPIO0_B7 || style="background:green; color:white"|11 || || style="background:green; color:white"|12 || GPIO2_A2 || UART0_CTSN || SPI0_CLK || I2C2_SDA || 66
|-
| 16 || || I2C3_SCL_M0 || PWM3 || GPIO0_C0 || style="background:green; color:white"|13 || || style="background:black; color:white"|14 || GND || || || ||
|-
| 17 || || || SPDIF_TX || GPIO0_C1 || style="background:green; color:white"|15 || || style="background:green; color:white"|16 || GPIO2_A3 || UART0_RTSN || SPI0_CSN0 || I2C2_SCL || 67
|-
| || || || || +3.3V || style="background:yellow"|17 || || style="background:green; color:white"|18 || GPIO2_B1 || I2S0_8CH_SDO0 || || || 73
|-
| 55 || SPI2_MOSI || UART2_TX_M0 || UART1_RTSN || GPIO1_C7 || style="background:green; color:white"|19 || ||style="background:black; color:white"|20 || GND || || || ||
|-
| 54 || SPI2_MISO || UART2_RX_M0 || UART1_CTSN || GPIO1_C6 || style="background:green; color:white"|21 || || style="background:green; color:white"|22 || GPIO0_B6 || PWM1 || || || 14
|-
| 56 || SPI2_CLK || I2C0_SDA || UART1_RX || GPIO1_D0 || style="background:green; color:white"|23 || || style="background:green; color:white"|24 || GPIO1_D1 || UART1_TX || I2C0_SCL || SPI2_CSN0 || 57
|-
| || || || || GND || style="background:black; color:white"|25 || || style="background:green; color:white"|26 || ADC_IN0 || || || ||
|}

==== 26-pin Header 2 ====

{| class="mw-collapsible mw-collapsed wikitable"
! GPIO number || Func3 || Func2 || Func1 || Pin# || || Pin# || Func1 || Func2 || Func3 || GPIO number
|-
| || || || GND || style="background:black; color:white"| 27 || ||style="background:black; color:white"| 28 || GPIO2_A6 || I2S0_8CH_SCLK_RX || PDM_CLK_S_M2 ||| 70
|-
| || || || ADC_KEY_IN1 || style="background:black; color:white"| 29 || || style="background:black; color:white"| 30 || GPIO2_B5 || I2S0_8CH_SDI0 || PDM_SDI0_M2 || 77
|-
| || || || MICBIAS2 || style="background:black; color:white"| 31 || || style="background:black; color:white"| 32 || GPIO2_B6 || I2S0_8CH_SDI1 || PDM_SDI1_M2 || 78
|-
| || || || MICBIAS1 || style="background:black; color:white"| 33 || || style="background:black; color:white"| 34 || GPIO2_B7 || I2S0_8CH_SDI2 || PDM_SDI2_M2 || 79
|-
| || || || MICN8 || style="background:black; color:white"| 35 || || style="background:black; color:white"|36 || MCIP8 || || ||
|-
| || || || MICN7 || style="background:black; color:white"|37 || || style="background:black; color:white"|38 || MCIP7 || || ||
|-
| || || || MICN6 || style="background:black; color:white"|39 || || style="background:black; color:white"|40 || MCIP6 || || ||
|-
| || || || MICN5 || style="background:black; color:white"|41 || || style="background:black; color:white"|42 || MCIP5 || || ||
|-
| || || || MICN4 || style="background:black; color:white"|43 || || style="background:black; color:white"|44 || MCIP4 || || ||
|-
| || || || MICN3 || style="background:black; color:white"|45 || ||style="background:black; color:white"|46 || MCIP3 || || ||
|-
| || || || MICN2 || style="background:black; color:white"|47 || || style="background:black; color:white"|48 || MCIP2 || || ||
|-
| || || || MICN1 || style="background:black; color:white"|49 || || style="background:black; color:white"|50 || MCIP1 || || ||
|-
| || || || LINEOUT_R || style="background:black; color:white"|51 || || style="background:black; color:white"|52 || LINEOUT_L || || ||
|}
</div>
</div>
</div>

<div class="clearfix"></div>

==== More details about V11 Headers ====

* Pins marked with color orange are designed for default debug console.
* PWM: x3, PWM1/PWM2/PWM3
* SPI: x2, SPI0/SPI2
* I2C: x4, I2C0/I2C1/I2C2/I2C3
* UART: x3, UART0/UART1/UART2
* ADC: x1, ADC_IN0. The max input voltage is 1.8V.

<div class="col-md-12 ">
<div class="panel panel-midnight-white">
<div class="panel-heading"><h3>Hardware V12</h3></div>
<div class="panel-body">

==== 26-pin Header 1 ====

{| class="mw-collapsible wikitable"
! GPIO number || Func4 || Func3 || Func2 || Func1 || Pin# || || Pin# || Func1 || Func2 || Func3 || Func4 || GPIO number
|-
| || || || || +3.3V || style="background:yellow"| 1 || ||style="background:red"| 2 || +5.0V || || ||| ||
|-
| 11 || || || I2C1_SDA || GPIO0_B3 || style="background:green; color:white"| 3 || || style="background:red"| 4 || +5.0V || || || ||
|-
| 12 || || || I2C1_SCL || GPIO0_B4 || style="background:green; color:white"| 5 || || style="background:black; color:white"| 6 || GND || || || ||
|-
| 68 || || PDM_CLK_M_M2 || I2S0_8CH_MCLK || GPIO2_A4 || style="background:green; color:white"| 7 || || style="background:green; color:white"| 8 || GPIO2_A1 || style="background:orange"|UART0_TX || SPI0_MOSI || || 65
|-
| || || || || GND || style="background:black; color:white"| 9 || || style="background:green; color:white"|10 || GPIO2_A0 || style="background:orange"|UART0_RX || SPI0_MISO || || 64
|-
| 15 || || I2C3_SDA_M0 || PWM2 || GPIO0_B7 || style="background:green; color:white"|11 || || style="background:green; color:white"|12 || GPIO2_A5 || I2S0_8CH_SCLK_TX || || || 69
|-
| 16 || || I2C3_SCL_M0 || PWM3 || GPIO0_C0 || style="background:green; color:white"|13 || || style="background:black; color:white"|14 || GND || || || ||
|-
| 17 || || || SPDIF_TX || GPIO0_C1 || style="background:green; color:white"|15 || || style="background:green; color:white"|16 || GPIO2_B2 || I2S0_8CH_SDO1 || || || 74
|-
| || || || || +3.3V || style="background:yellow"|17 || || style="background:green; color:white"|18 || GPIO2_B1 || I2S0_8CH_SDO0 || || || 73
|-
| 55 || SPI2_MOSI || UART2_TX_M0 || UART1_RTSN || GPIO1_C7 || style="background:green; color:white"|19 || ||style="background:black; color:white"|20 || GND || || || ||
|-
| 54 || SPI2_MISO || UART2_RX_M0 || UART1_CTSN || GPIO1_C6 || style="background:green; color:white"|21 || || style="background:green; color:white"|22 || GPIO2_A7 || I2S0_8CH_LRCK_TX || || || 71
|-
| 56 || SPI2_CLK || I2C0_SDA || UART1_RX || GPIO1_D0 || style="background:green; color:white"|23 || || style="background:green; color:white"|24 || GPIO1_D1 || UART1_TX || I2C0_SCL || SPI2_CSN0 || 57
|-
| || || || || GND || style="background:black; color:white"|25 || || style="background:green; color:white"|26 || ADC_IN0 || || || ||
|}

==== 26-pin Header 2 ====

{| class="mw-collapsible wikitable"
! GPIO number || Func3 || Func2 || Func1 || Pin# || || Pin# || Func1 || Func2 || Func3 || GPIO number
|-
| || || || GND || style="background:black; color:white"| 27 || ||style="background:black; color:white"|28 || GPIO2_B5 || I2S0_8CH_SDI0 || PDM_SDI0_M2 ||| 77
|-
| || || || ADC_KEY_IN1 || style="background:black; color:white"| 29 || || style="background:black; color:white"|30 || GPIO2_B6 || I2S0_8CH_SDI1 || PDM_SDI1_M2 || 78
|-
| || || || MICBIAS2 || style="background:black; color:white"| 31 || || style="background:black; color:white"|32 || GPIO2_B7 || I2S0_8CH_SDI2 || PDM_SDI2_M2 || 79
|-
| || || || MICBIAS1 || style="background:black; color:white"|33 || || style="background:black; color:white"|34 || GPIO2_C0 || I2S0_8CH_SDI3 || PDM_SDI3_M2 || 80
|-
| || || || MICN8 || style="background:black; color:white"| 35 || || style="background:black; color:white"|36 || MCIP8 || || ||
|-
| || || || MICN7 || style="background:black; color:white"|37 || || style="background:black; color:white"|38 || MCIP7 || || ||
|-
| || || || MICN6 || style="background:black; color:white"|39 || || style="background:black; color:white"|40 || MCIP6 || || ||
|-
| || || || MICN5 || style="background:black; color:white"|41 || || style="background:black; color:white"|42 || MCIP5 || || ||
|-
| 76 || || I2S0_8CH_SDO3 || GPIO2_B4 || style="background:black; color:white"|43 || || style="background:black; color:white"|44 || GPIO2_B3 || I2S0_8CH_SDO2 || || 75
|-
| 72 || || I2S0_8CH_LRCK_RX || GPIO2_B0 || style="background:black; color:white"|45 || ||style="background:black; color:white"|46 || GPIO2_A6 || I2S0_8CH_SCLK_RX || PDM_CLK_S_M2 || 70
|-
| || || || MICN2 || style="background:black; color:white"|47 || || style="background:black; color:white"|48 || MCIP2 || || ||
|-
| || || || MICN1 || style="background:black; color:white"|49 || || style="background:black; color:white"|50 || MCIP1 || || ||
|-
| || || || LINEOUT_R || style="background:black; color:white"|51 || || style="background:black; color:white"|52 || LINEOUT_L || || ||
|}

</div>
</div>
</div>

==== More details about V12 Headers ====

* Pins marked with color orange are designed for default debug console.
* PWM: x2, PWM2/PWM3
* SPI: x1, SPI2
* I2C: x3, I2C0/I2C1/I2C3
* UART: x3, UART0/UART1/UART2
* ADC: x1, ADC_IN0. The max input voltage is 1.8V.

<div class="col-md-12 ">
<div class="panel panel-midnight-white">
<div class="panel-heading"><h3>Hardware V13</h3></div>
<div class="panel-body">

==== 26-pin Header 1 ====

{| class="mw-collapsible wikitable"
! GPIO number || Func4 || Func3 || Func2 || Func1 || Pin# || || Pin# || Func1 || Func2 || Func3 || Func4 || GPIO number
|-
| || || || || +3.3V || style="background:yellow"| 1 || ||style="background:red"| 2 || +5.0V || || ||| ||
|-
| 11 || || || I2C1_SDA || GPIO0_B3 || style="background:green; color:white"| 3 || || style="background:red"| 4 || +5.0V || || || ||
|-
| 12 || || || I2C1_SCL || GPIO0_B4 || style="background:green; color:white"| 5 || || style="background:black; color:white"| 6 || GND || || || ||
|-
| 68 || || PDM_CLK_M_M2 || I2S0_8CH_MCLK || GPIO2_A4 || style="background:green; color:white"| 7 || || style="background:green; color:white"| 8 || GPIO2_A1 || style="background:orange"|UART0_TX || SPI0_MOSI || || 65
|-
| || || || || GND || style="background:black; color:white"| 9 || || style="background:green; color:white"|10 || GPIO2_A0 || style="background:orange"|UART0_RX || SPI0_MISO || || 64
|-
| 15 || || I2C3_SDA_M0 || PWM2 || GPIO0_B7 || style="background:green; color:white"|11 || || style="background:green; color:white"|12 || GPIO2_A5 || I2S0_8CH_SCLK_TX || || || 69
|-
| 16 || || I2C3_SCL_M0 || PWM3 || GPIO0_C0 || style="background:green; color:white"|13 || || style="background:black; color:white"|14 || GND || || || ||
|-
| 17 || || || SPDIF_TX || GPIO0_C1 || style="background:green; color:white"|15 || || style="background:green; color:white"|16 || GPIO2_B2 || I2S0_8CH_SDO1 || || || 74
|-
| || || || || +3.3V || style="background:yellow"|17 || || style="background:green; color:white"|18 || GPIO2_B1 || I2S0_8CH_SDO0 || || || 73
|-
| 55 || SPI2_MOSI || UART2_TX_M0 || UART1_RTSN || GPIO1_C7 || style="background:green; color:white"|19 || ||style="background:black; color:white"|20 || GND || || || ||
|-
| 54 || SPI2_MISO || UART2_RX_M0 || UART1_CTSN || GPIO1_C6 || style="background:green; color:white"|21 || || style="background:green; color:white"|22 || GPIO2_A7 || I2S0_8CH_LRCK_TX || || || 71
|-
| 56 || SPI2_CLK || I2C0_SDA || UART1_RX || GPIO1_D0 || style="background:green; color:white"|23 || || style="background:green; color:white"|24 || GPIO1_D1 || UART1_TX || I2C0_SCL || SPI2_CSN0 || 57
|-
| || || || || GND || style="background:black; color:white"|25 || || style="background:green; color:white"|26 || ADC_IN0 || || || ||
|}

==== 26-pin Header 2 ====

{| class="mw-collapsible wikitable"
! GPIO number || Func4 || Func3 || Func2 || Func1 || Pin# || || Pin# || Func1 || Func2 || Func3 || Func4 || GPIO number
|-
| || || || || GND || style="background:black; color:white"|27 || ||style="background:black; color:white"|28 || GPIO2_B5 || I2S0_8CH_SDI0 || PDM_SDI0_M2 || || 77
|-
| || || || || ADC_KEY_IN1 || style="background:black; color:white"| 29 || || style="background:black; color:white"|30 || GPIO2_B6 || I2S0_8CH_SDI1 || PDM_SDI1_M2 || || 78
|-
| || || || || MICBIAS2 || style="background:black; color:white"| 31 || || style="background:black; color:white"|32|| GPIO2_B7 || I2S0_8CH_SDI2 || PDM_SDI2_M2 || || 79
|-
| || || || || MICBIAS1 || style="background:black; color:white"| 33 || || style="background:black; color:white"|34 || GPIO2_C0 || I2S0_8CH_SDI3 || PDM_SDI3_M2 || || 80
|-
| || || || || MICN8 || style="background:black; color:white"| 35 || || style="background:black; color:white"|36 || MCIP8 || || || ||
|-
| || || || || MICN7 || style="background:black; color:white"|37 || || style="background:black; color:white"|38 || MCIP7 || || || ||
|-
| 109 || UART3_TX || I2C3_SCL_M1 || SPI1_CSN0 || GPIO3_B5 || style="background:black; color:green"|39|| || style="background:black; color:green"|40|| GPIO3_B4 || SPI1_MOSI || I2C3_SDA_M1 || UART3_RX || 108
|-
| 107 || || || SPI1_CLK || GPIO3_B3 || style="background:black; color:green"|41 || || style="background:black; color:green"|42 || GPIO3_B2 || SPI1_MISO || || || 106
|-
| 76 || |||| I2S0_8CH_SDO3 || GPIO2_B4 || style="background:black; color:white"|43|| || style="background:black; color:white"|44 || GPIO2_B3 || I2S0_8CH_SDO2 || || || 75
|-
| 72 || || || I2S0_8CH_LRCK_RX || GPIO2_B0 || style="background:black; color:white"|45 || ||style="background:black; color:white"|46 || GPIO2_A6 || I2S0_8CH_SCLK_RX || PDM_CLK_S_M2 || || 70
|-
| || || || || MICN2 || style="background:black; color:white"|47 || || style="background:black; color:white"|48 || MCIP2 || || || ||
|-
| || || || || MICN1 || style="background:black; color:white"|49|| || style="background:black; color:white"|50 || MCIP1 || || || ||
|-
| || || || || LINEOUT_R || style="background:black; color:white"|51 || || style="background:black; color:white"|52|| LINEOUT_L || || || ||
|}

</div>
</div>
</div>

==== More details about V13 Headers ====

* The difference between V12 and V13 is determined by PIN#13/14/15/16 on 26-pin Header 2.
* Pins marked with color orange are designed for default debug console.
* PWM: x2, PWM2/PWM3
* SPI: x2, SPI1, SPI2
* I2C: x3, I2C0/I2C1/I2C3
* UART: x4, UART0/UART1/UART2/UART3
* ADC: x1, ADC_IN0. The max input voltage is 1.8V.
* When I2C3 is used, you should only select one of the two groups, PIN#11/13 on 26-pin Header 1 and PIN#13/14 on 26-pin Header 2.

== IO Voltage ==
RK3308 have two IO voltages, '''1.8V/3.3V'''. For ROCK Pi S, the voltage level of GPIOs showed in the tables above are '''3.3V''' and tolerance of those are '''3.63V'''. For hardware V11 and V12, an ADC input is included (ADC_IN0). This ADC has an input voltage range of '''0-1.8V'''.

== GPIO number ==
Rockchip RK3308 GPIO has 5 banks, GPIO0 to GPIO4, each bank has 32pins, naming as below:

GPIO0_A0 ~ A7
GPIO0_B0 ~ B7
GPIO0_C0 ~ C7
GPIO0_D0 ~ D7

GPIO1_A0 ~ A7
....
GPIO1_D0 ~ D7

For Rockchip 4.4 kernel, the GPIO number can be calculated as below, take GPIO4_D3(PIN8 on 26PIN GPIO) as an example:

GPIO4_D3 = 32*4 + 8*3 + 3 = 155

To set GPIO4_D3 output

cd /sys/class/gpio
echo 155 > export
cd gpio155
echo out > direction
echo 1 > value # output high
echo 0 > value # output low

== Power supply ==

1.The pins, <code>PIN#2 and PIN#4</code>, can supply power of <code>5V</code>. The maximum current that can output depends on the power adapter.

2.The pins, <code>PIN#1 and PIN#17</code>, can supply power of <code>3.3V</code>. The maximum current that can output is <code>200mA</code>.

Buy

2024-09-04T03:27:09Z

Hipboi:

__NOTOC__

{{Languages|buy}}

<div class="col-md-12">
<h3 class="brand-name text-center" style="margin-top:0px;"><span class="label label-danger">Buy Radxa</span></h3>
<hr class="tagline-divider" />
<p class="text-center"><strong>Authorized Distributors</strong></p>
</div>

<div class="col-md-12 box box-flame">
<div class="col-md-6">
<div class="thumbnail img-thumbnail no-border pull-right"> </div>
<h3>Global Distributor - OKDO</h3>
<div class="caption">
<div class="thumbnail ">[[File:Okdo_logo.png | left | 350px]]</div>
<p>
Okdo is the official global distributors of Radxa, Packages are shipped from warehouses in major three continent of the world.</p>
<div class="btn btn-default"> [https://www.okdo.com/c/rock-shop/ Buy from Okdo online shop]</div> <br>

</div> 
</div> 

<div class="col-md-6">
<div class="thumbnail img-thumbnail no-border pull-right"> </div>
<h3>About OKDO</h3>
<div class="caption">

<p>
OKdo is a global technology company from RS Group PLC set to disrupt single board computer (SBC) and IoT segments. Offering a unique combination of hardware, software, development support, manufacturing services and community projects, it is the world’s first business uniquely focused on meeting the rapidly evolving needs of SBC and IoT customers, from makers and entrepreneurs to industrial designers, educators and resellers. </p>

</div> 
</div> 

</div>

<div class="col-md-12 box box-flame">
<div class="col-md-6">
<div class="thumbnail img-thumbnail no-border pull-right"> </div>
<h3>Allnet</h3>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet.png | left | 350px]]</div>
<p>
Allnet is the official authorized distributors of Radxa, Packages are shipped from Germany or China.</p>
<div class="btn btn-default"> [https://shop.allnetchina.cn/ Buy from Allnet China]</div> <br>
<div class="btn btn-default"> [https://www.innet24.de/advanced_search_result.php?keywords=rockpi&x=0&y=0 Buy from Innet24.de]</div> <br>
<div class="btn btn-default"> [https://shop.maker-store.de/search?sSearch=rock+pi Buy from Maker-store.de]</div> <br>

</div> 
</div> 

<div class="col-md-6">
<div class="thumbnail img-thumbnail no-border pull-right"> </div>
<h3>About ALLNET</h3>
<div class="caption">

<p>
ALLNET has a successful track record of introducing new products and vendors into various market segments and regions. A team of marketing, hardware and software specialists with the necessary skillsets combined with the excitement for new technology are the foundation of the successful collaboration with resellers, makers or developers and are our strong backup for your project implementation.<br><br>

A 27 years long and successful history in distribution, covering many countries worldwide combined with an excellent understanding of the local markets and a passion for what we do makes us the perfect partner. If you are a developer, reseller, project manager – ALLNET provides the services which are the key to your business success! </p>

</div> 
</div> 

</div>

<div class="col-md-12 box box-flame">
<div class="col-md-6">
<div class="thumbnail img-thumbnail no-border pull-right"> </div>
<h3>Ameridroid</h3>
<div class="caption">
<div class="thumbnail ">[[File:Ameridroid_logo.png | left | 350px]]</div>
<p>
Ameridroid is the official authorized distributors of Radxa in North America, packages are shipped from US.</p>
<div class="btn btn-default"> [https://ameridroid.com/ Buy from Ameridroid]</div> <br>

</div> 
</div> 

<div class="col-md-6">
<div class="thumbnail img-thumbnail no-border pull-right"> </div>
<h3>About Ameridroid</h3>
<div class="caption">

<p>
US-Based Distributor of SBCs, Home Automation and Electronics</p>
</div> 
</div> 

</div>

<div class="col-md-12 box">

<h3>Find a local distributor</h3>

<div class="bs-example bs-example-tabs">
<ul id="myTabBuy" class="nav nav-tabs nav-justified nav-tabs" style="margin:0;">
<li class="active" data-toggle="tab">[http://wiki.radxa.com/Nav_Tabs#asia Asia]</li>
<li data-toggle="tab"> [http://wiki.radxa.com/Nav_Tabs#europe Europe]</li>
<li data-toggle="tab">[http://wiki.radxa.com/Nav_Tabs#america North America]</li>
</ul>
</div>
<div id="myTabBuy" class="tab-content">

<div class="tab-pane active" id="asia">
<div class="col-md-12 box box-forest">
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:logo_country_china.png]]</div>
<h4>ALLNET China</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet.png | 150px ]]</div>
<div class="clearfix"></div>
<p class="text-justify">
4/F, Bldg C, Jinbaobao Industrial Park,<br>
No 2 North Area Shangxue Science&Tech Park,<br>
Jihua Road, Bantian Street, Longgang District,<br>
Shenzhen 518129, Guangdong, P. R. CHINA<br>
Phone: +86 755 28220131<br>
E-Mail: rockpi@allnetchina.cn <br>
</p>
Website: [https://www.allnetchina.cn/rockpi/ https://www.allnetchina.cn/rockpi]
</div>
</div> 
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_area_taiwan.png]]</div>
<h4>ALLNET Taiwan</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet_taiwan.png |150px ]]</div>
<div class="clearfix"></div>
<p class="text-justify">
No.34, LANE 90<br>
WEN TEH ROAD <br>
NEI HU District TW-Taipei Taiwan R.O.C.<br>
Phone: +886 3 620 5817<br>
Fax: +88 6226586558<br>
E-Mail: davidyu@allnet.asia<br>
</p>
</div>
</div> 
</div> 
</div> 
<div class="tab-pane" id="europe">
<div class="col-md-12 box box-forest">
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_country_Germany.png]]</div>
<h4>ALLNET Deutschland GmbH</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet.png | 150px]]</div>
<p class="text-justify">
Maistraße 2<br>
82110 Germering<br>
Phone: +49 (0)89 894 222 - 22<br>
Fax: +49 (0)89 894 222 - 33<br>
E-Mail: info@allnet.de<br></p>
</div>
</div> 
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_country_Nordic.jpg]]</div>
<h4>ALLNET Nordic</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet_nordic.jpg| 150px]]</div>
<p class="text-justify">
World Trade Center<br>
Borupvang 3<br>
2750 Ballerup<br>
Phone: +45 6996 0000<br>
E-Mail: info@allnet.dk<br>
</p>
</div>
</div> 
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_country_Romania.png]]</div>
<h4>ALLNET Rumänien</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet.png| 150px]]</div>
<p class="text-justify">
Str. Ing. V. Cristescu nr. 17 <br>
et. 1 sector 2 <br>
029184 Bucuresti <br>
Phone: +40 21 320 4707 <br>
Fax: +40 21 302 8903 <br>
E-Mail: office@lantec.ro<br>
</p>
</div>
</div> 
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_country_Swiss.png]]</div>
<h4>ALLNET Schweiz</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet_swiss.png| 150px]]</div>
<p class="text-justify">
Industriestraße 57<br>
8152 Glattbrugg<br>
Phone: +41 44 552 44 80<br>
Fax: +41 44 552 44 81<br>
E-Mail: azenk@allnetch.com<br>
</p>
</div>
</div> 
<hr class="tagline-divider" />
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_country_Hungary.png]]</div>
<h4>ALLNET Ungarn</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet_Hungary.png | 150px]]</div>
<p class="text-justify">
B£zavir g u. 12 <br>
5309 Berekfürdö<br>
Phone: +36 59 519200<br>
Fax: +36 59 519203 <br>
E-Mail: info@allnet.co.hu<br>
</p>
</div>
</div> 
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_country_Austria.png]]</div>
<h4>ALLNET Österreich</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet_austria.png | 150px]]</div>
<p class="text-justify">
Dr. Erwin Schrödinger Strasse 14 <br>
9500 Villach<br>
Phone: +43 424222137<br>
Fax: +43 424222125<br>
E-Mail: office@allnet.at<br>
</p>
</div>
</div> 
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_country_Spain.png]]</div>
<h4>ALLNET ESPAÑA</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet_spain.png | 150px]]</div>
<p class="text-justify">
Monte do Rei Nø33 Sofán <br>
15108 Carballo - La Coruna <br>
Phone: +34 981 753141 <br>
Fax: +34 981 753261 <br>
E-Mail: apd@allnet.es <br>
</p>
</div>
</div> 
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_country_france.png]]</div>
<h4>ALLNET FRANCE</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet_france.png | 150px]]</div>
<p class="text-justify">
Maistraße 2 <br>
82110 Germering<br>
Phone: +33 0811 39 49 50 <br>
Fax: +33 0811 39 49 51<br>
E-Mail: sales@allnetfrance.fr<br>
</p>
</div>
</div> 
<hr class="tagline-divider" />
<div class="col-md-3">
<div class="thumbnail img-thumbnail no-border pull-right">[[File:Logo_country_Italia.png]]</div>
<h4>ALLNET ITALIA</h4>
<div class="caption">
<div class="thumbnail ">[[File:Distributor_allnet_italia.png | 150px]]</div>
<p class="text-justify">
Via Fuccini 2 <br>
40033 Casalecchio di Reno<br>
Phone: +39 051 0547710<br>
Fax: +39 051 334181<br>
E-Mail: sales@allnet-italia.it<br>
</p>
</div>
</div> 
</div> 
</div> 

<div class="tab-pane" id="america">
<div class="col-md-12 box box-forest">

</div>
</div>
</div>
</div>

File:Werock.jpg

2024-05-29T12:00:26Z

Hipboi:

Rock3/hardware

2024-05-15T09:17:22Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/hardware}}

__NOTOC__

<div class="col-md-12">
<h3 class="brand-name text-center" style="margin-top:0px;"><span class="label flame">Hardware</span></h3>
<hr class="tagline-divider" />
<h5 class="text-center" style="margin-bottom:20px;">Technical information about ROCK 3 Series hardware</h5>
</div>

<div class="col-md-12 ">
<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title"> SBC </h3> </div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3A</h3> </div>
<div class="panel-body">

*[[rock3/hardware/3a | ROCK 3 Model A]]
** [https://dl.radxa.com/rock3/docs/hw/3a/ROCK-3A-V1.3-SCH.pdf v1.3 schematic pdf] - Download Schematic of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_2d_dxf.zip v1.3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_3d_emn_emp.zip v1.3 3D] - Download 3D(.emn/.emp format) of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/ROCK-3A-V1.3-SMD.pdf v1.3 CAM pdf] - Download components Position Reference of ROCK 3 Model A

* [[rock3/hardware/rock3a-gpio | ROCK 3A GPIO]]

* Compliance
** [https://dl.radxa.com/rock3/compliance/3a/BCTC2112981353C_Rock_3A_RS117-D8U_EMC_Test_Verification_of_Conformity.pdf CE RED] - EU
</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3B </h3> </div>
<div class="panel-body">

*[[rock3/hardware/3b | ROCK 3 model B]]
** [https://dl.radxa.com/rock3 v1.2 schematic] - Download Schematic of ROCK 3 Model B
** [https://dl.radxa.com/rock3 v1.2 CAM pdf] - Download components Position Reference of ROCK 3 Model B
** [https://dl.radxa.com/rock3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model B

* [[rock3/hardware/3b/gpio | ROCK 3B GPIO]]

* [[Rock3/hardware/models | Models and SKUs]] - Different variant of each models

</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3C</h3> </div>
<div class="panel-body">

*[[rock3/hardware/3c | ROCK 3 Model C]]
** [https://dl.radxa.com/rock3/docs/hw/3c/ROCK-3C-V1.332-SCH.pdf v1.332 schematic pdf] - Download Schematic of ROCK 3 Model C
** [https://dl.radxa.com/rock3/docs/hw/3c/ROCK-3C-V1.332-SMD.pdf v1.332 CAM pdf] - Download components Position Reference of ROCK 3 Model C
** [https://dl.radxa.com/rock3/docs/hw/3c/rock3c_v1.2_2d_dxf.zip v1.2 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model C
** [https://dl.radxa.com/rock3/docs/hw/3c/rock3c_v1.2_3d_emn_emp.zip v1.2 3D] - Download 3D(.emn/.emp format) of ROCK 3 Model C

* [[Rock3/hardware/3c/gpio | ROCK 3C GPIO]]

* Compliance

</div>
</div>
</div>

</div>

<div class="col-md-12 ">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa CM3 IO Board</h3> </div>
<div class="panel-body">

*[[rock3/CM3/IO | Radxa CM3 IO Board]]
** [https://dl.radxa.com/rock3/docs/hw/cm3-io/Radxa-CM3-IO-V1.3-SCH.pdf v1.3 schematic pdf] - Download Schematic of CM3 IO board
** [https://dl.radxa.com/rock3/docs/hw/ v1.2 2D Top&Bottom dxf] - Download 2D CAD of CM3 IO board
** [https://dl.radxa.com/rock3/docs/hw/cm3-io/Radxa-CM3-IO-V1.3-SMD.pdf v1.3 CAM pdf] - Download components Position Reference of CM3 IO board
* [https://github.com/radxa/radxa-cm-projects/tree/main/cm3/radxa-cm3-io-board Design files of CM3 IO Board]
* [[rock3/CM3/IO/pinout/revision | Hardware Revision]] - Difference between each hardware revisions
* [[rock3/CM3/IO/pinout | Connector and Header pinout]]
* [[rock3/CM3/IO/GPIO | CM3 IO GPIO]]

</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa E23 </h3> </div>
<div class="panel-body">

*[[rock3/CM3/e23 | Radxa E23]]
** [https://dl.radxa.com/cm3/e23/RADXA_E23_V11_SCH_20211127.pdf v1.1 schematic pdf] - Download Schematic of E23
** [ v1.1 2D Top&Bottom dxf] - Download 2D CAD of E23
** [https://dl.radxa.com/cm3/e23/RADXA_E23_V11_SMD_20211127.pdf v1.1 SMD pdf] - Download components position reference of E23

* [[rock3/CM3/e23/GPIO | E23 GPIO]]

* Compliance
** [https://dl.radxa.com/rock3/compliance/3a/BCTC2112981353C_Rock_3A_RS117-D8U_EMC_Test_Verification_of_Conformity.pdf CE RED] - EU

</div>
</div>
</div>

</div>

<div class="col-md-12">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa E25 </h3> </div>
<div class="panel-body">

*[[Rock3/hardware/e25 | Radxa E25]]
** [https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf V1.4 schematic pdf] - Download Schematic of E25 with CM3+
** [https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-smd.pdf V1.4 SMD pdf] - Download components Position Reference of E25

* [[rock3/CM3p/e25/GPIO | E25 GPIO]]

* Compliance
** [https://dl.radxa.com/rock3 CE RED] - EU

</div>
</div>
</div>

<div class="col-md-12">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa CM3S IO </h3> </div>
<div class="panel-body">

</div>
</div>
</div>

<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title"><span id="datasheet">Datasheets </span></h3> </div>
<div class="panel-body">

* Datasheet
** [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip-RK3568-Datasheet-V1.0-20201210.pdf RK3568 datasheet] - The SoC of ROCK 3
** [https://dl.radxa.com/cm3p/docs/datasheets/Rockchip%c2%a0RK3568J%c2%a0Datasheet%c2%a0V1.0-20220304.pdf RK3568J datasheet] - The SoC of CM3 Plus
** RK3568 TRM(Technical Reference Manual) [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf Part 1](17MB, 852 pages), [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part2%20V1.1-20210301.pdf Part 2](43MB, 2583 pages)- The detail about RK3568
** [https://dl.radxa.com/rock3/docs/hw/datasheet/RK809-datasheet-v1.01.pdf RK809] - The PMIC
** [https://dl.radxa.com/rock3/docs/hw/datasheets/RTL8211F-CG-Datasheet.pdf RTL8211F] - The ethernet phy
** [https://dl.radxa.com/rock3/docs/hw/datasheets/IP2315-datasheet-cn-V1.0.pdf IP2315] - Charging IC with integrated input fast charge protocol

</div>
</div>
</div>

<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title"><span id="accessories">Accessories</span></h3> </div>
<div class="panel-body">

* [[rock3/hardware/wifi | WiFi/BT Cards]]
* [[rock3/hardware/emmc | eMMC module]]
* [[Rock3/hardware/usb3_eMMC_reader | USB3 eMMC Reader]]
* [[rock3/hardware/rtc | RTC battery]]

* Official heatsink
** [https://dl.radxa.com/rockpi4/docs/hw/heatsink-1225-al-1.stp 3D drawing] - 3D model of official heatsink
* [[rock3/hardware/display | Display]]
* [[rock3/hardware/camera/ | Camera module]]

* [[rock3/hardware/HATs | HATs]]
** [[rock3/hardware/PoE | PoE HAT]]
** [[Dual_Quad_SATA_HAT | Dual/Quad SATA HAT]]
** [[Penta_SATA_HAT | Penta SATA HAT]]

* [[rock3/hardware/M2_extend | M.2 extend board]]
** 2D file for M.2 extend board - [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/PCIE_to_FPC_V1.4.dxf Connector to FPC board], [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/FPC_to_M2_V1.4.dxf SSD mount board]
** Schematic of M.2 extend board - [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/rockpi4-m2-extend-sch_pcie_to_fpc_V1.4.pdf Connector to FPC board], [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/rockpi4-m2-extend-sch_fpc_to_m2_V1.4.pdf SSD mount board]
* [[rock3/hardware/spi_flash | SPI Flash]]

* [[Device-tree-overlays | Device Tree Overlays]]

</div>
</div>
</div>

</div>

Rock3/hardware

2024-05-15T09:16:59Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/hardware}}

__NOTOC__

<div class="col-md-12">
<h3 class="brand-name text-center" style="margin-top:0px;"><span class="label flame">Hardware</span></h3>
<hr class="tagline-divider" />
<h5 class="text-center" style="margin-bottom:20px;">Technical information about ROCK 3 Series hardware</h5>
</div>

<div class="col-md-12 ">
<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title"> SBC </h3> </div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3A</h3> </div>
<div class="panel-body">

*[[rock3/hardware/3a | ROCK 3 Model A]]
** [https://dl.radxa.com/rock3/docs/hw/3a/ROCK-3A-V1.3-SCH.pdf v1.3 schematic pdf] - Download Schematic of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_2d_dxf.zip v1.3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_3d_emn_emp.zip v1.3 3D] - Download 3D(.emn/.emp format) of ROCK 3 Model A
** [https://dl.radxa.com/rock3/docs/hw/3a/ROCK-3A-V1.3-SMD.pdf v1.3 CAM pdf] - Download components Position Reference of ROCK 3 Model A

* [[rock3/hardware/rock3a-gpio | ROCK 3A GPIO]]

* Compliance
** [https://dl.radxa.com/rock3/compliance/3a/BCTC2112981353C_Rock_3A_RS117-D8U_EMC_Test_Verification_of_Conformity.pdf CE RED] - EU
</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3B </h3> </div>
<div class="panel-body">

*[[rock3/hardware/3b | ROCK 3 model B]]
** [https://dl.radxa.com/rock3 v1.2 schematic] - Download Schematic of ROCK 3 Model B
** [https://dl.radxa.com/rock3 v1.2 CAM pdf] - Download components Position Reference of ROCK 3 Model B
** [https://dl.radxa.com/rock3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model B

* [[rock3/hardware/3b/gpio | ROCK 3B GPIO]]

* [[rock3/hardware/revision | Hardware Revision]] - Difference between each hardware revisions
* [[Rock3/hardware/models | Models and SKUs]] - Different variant of each models

</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">ROCK 3C</h3> </div>
<div class="panel-body">

*[[rock3/hardware/3c | ROCK 3 Model C]]
** [https://dl.radxa.com/rock3/docs/hw/3c/ROCK-3C-V1.332-SCH.pdf v1.332 schematic pdf] - Download Schematic of ROCK 3 Model C
** [https://dl.radxa.com/rock3/docs/hw/3c/ROCK-3C-V1.332-SMD.pdf v1.332 CAM pdf] - Download components Position Reference of ROCK 3 Model C
** [https://dl.radxa.com/rock3/docs/hw/3c/rock3c_v1.2_2d_dxf.zip v1.2 2D Top&Bottom dxf] - Download 2D CAD of ROCK 3 Model C
** [https://dl.radxa.com/rock3/docs/hw/3c/rock3c_v1.2_3d_emn_emp.zip v1.2 3D] - Download 3D(.emn/.emp format) of ROCK 3 Model C

* [[Rock3/hardware/3c/gpio | ROCK 3C GPIO]]

* Compliance

</div>
</div>
</div>

</div>

<div class="col-md-12 ">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa CM3 IO Board</h3> </div>
<div class="panel-body">

*[[rock3/CM3/IO | Radxa CM3 IO Board]]
** [https://dl.radxa.com/rock3/docs/hw/cm3-io/Radxa-CM3-IO-V1.3-SCH.pdf v1.3 schematic pdf] - Download Schematic of CM3 IO board
** [https://dl.radxa.com/rock3/docs/hw/ v1.2 2D Top&Bottom dxf] - Download 2D CAD of CM3 IO board
** [https://dl.radxa.com/rock3/docs/hw/cm3-io/Radxa-CM3-IO-V1.3-SMD.pdf v1.3 CAM pdf] - Download components Position Reference of CM3 IO board
* [https://github.com/radxa/radxa-cm-projects/tree/main/cm3/radxa-cm3-io-board Design files of CM3 IO Board]
* [[rock3/CM3/IO/pinout/revision | Hardware Revision]] - Difference between each hardware revisions
* [[rock3/CM3/IO/pinout | Connector and Header pinout]]
* [[rock3/CM3/IO/GPIO | CM3 IO GPIO]]

</div>
</div>
</div>

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa E23 </h3> </div>
<div class="panel-body">

*[[rock3/CM3/e23 | Radxa E23]]
** [https://dl.radxa.com/cm3/e23/RADXA_E23_V11_SCH_20211127.pdf v1.1 schematic pdf] - Download Schematic of E23
** [ v1.1 2D Top&Bottom dxf] - Download 2D CAD of E23
** [https://dl.radxa.com/cm3/e23/RADXA_E23_V11_SMD_20211127.pdf v1.1 SMD pdf] - Download components position reference of E23

* [[rock3/CM3/e23/GPIO | E23 GPIO]]

* Compliance
** [https://dl.radxa.com/rock3/compliance/3a/BCTC2112981353C_Rock_3A_RS117-D8U_EMC_Test_Verification_of_Conformity.pdf CE RED] - EU

</div>
</div>
</div>

</div>

<div class="col-md-12">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa E25 </h3> </div>
<div class="panel-body">

*[[Rock3/hardware/e25 | Radxa E25]]
** [https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf V1.4 schematic pdf] - Download Schematic of E25 with CM3+
** [https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-smd.pdf V1.4 SMD pdf] - Download components Position Reference of E25

* [[rock3/CM3p/e25/GPIO | E25 GPIO]]

* Compliance
** [https://dl.radxa.com/rock3 CE RED] - EU

</div>
</div>
</div>

<div class="col-md-12">

<div class="col-md-4">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">Radxa CM3S IO </h3> </div>
<div class="panel-body">

</div>
</div>
</div>

<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title"><span id="datasheet">Datasheets </span></h3> </div>
<div class="panel-body">

* Datasheet
** [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip-RK3568-Datasheet-V1.0-20201210.pdf RK3568 datasheet] - The SoC of ROCK 3
** [https://dl.radxa.com/cm3p/docs/datasheets/Rockchip%c2%a0RK3568J%c2%a0Datasheet%c2%a0V1.0-20220304.pdf RK3568J datasheet] - The SoC of CM3 Plus
** RK3568 TRM(Technical Reference Manual) [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf Part 1](17MB, 852 pages), [https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part2%20V1.1-20210301.pdf Part 2](43MB, 2583 pages)- The detail about RK3568
** [https://dl.radxa.com/rock3/docs/hw/datasheet/RK809-datasheet-v1.01.pdf RK809] - The PMIC
** [https://dl.radxa.com/rock3/docs/hw/datasheets/RTL8211F-CG-Datasheet.pdf RTL8211F] - The ethernet phy
** [https://dl.radxa.com/rock3/docs/hw/datasheets/IP2315-datasheet-cn-V1.0.pdf IP2315] - Charging IC with integrated input fast charge protocol

</div>
</div>
</div>

<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title"><span id="accessories">Accessories</span></h3> </div>
<div class="panel-body">

* [[rock3/hardware/wifi | WiFi/BT Cards]]
* [[rock3/hardware/emmc | eMMC module]]
* [[Rock3/hardware/usb3_eMMC_reader | USB3 eMMC Reader]]
* [[rock3/hardware/rtc | RTC battery]]

* Official heatsink
** [https://dl.radxa.com/rockpi4/docs/hw/heatsink-1225-al-1.stp 3D drawing] - 3D model of official heatsink
* [[rock3/hardware/display | Display]]
* [[rock3/hardware/camera/ | Camera module]]

* [[rock3/hardware/HATs | HATs]]
** [[rock3/hardware/PoE | PoE HAT]]
** [[Dual_Quad_SATA_HAT | Dual/Quad SATA HAT]]
** [[Penta_SATA_HAT | Penta SATA HAT]]

* [[rock3/hardware/M2_extend | M.2 extend board]]
** 2D file for M.2 extend board - [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/PCIE_to_FPC_V1.4.dxf Connector to FPC board], [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/FPC_to_M2_V1.4.dxf SSD mount board]
** Schematic of M.2 extend board - [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/rockpi4-m2-extend-sch_pcie_to_fpc_V1.4.pdf Connector to FPC board], [https://dl.radxa.com/rockpi4/docs/hw/m2_extend/rockpi4-m2-extend-sch_fpc_to_m2_V1.4.pdf SSD mount board]
* [[rock3/hardware/spi_flash | SPI Flash]]

* [[Device-tree-overlays | Device Tree Overlays]]

</div>
</div>
</div>

</div>

File:We5itx.jpg

2024-05-09T06:43:16Z

Hipboi:

File:We5c.JPG

2024-05-09T06:30:24Z

Hipboi:

File:We5b.jpg

2024-05-09T04:01:28Z

Hipboi: Hipboi uploaded a new version of "File:We5b.jpg"

Rock3/3c

2024-04-19T01:39:51Z

Hipboi:

{{rock3_header}}

{{Languages|rock3/3c}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-8 ">

= ROCK 3C=
This is the documentation for ROCK 3C, written by Radxa Team with community contributions.

ROCK 3C features a quad core Cortex-A55 ARM processor, 32bit 3200Mb/s LPDDR4, up to 1920x1080@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, GbE LAN, PCIe 2.0, 40-pin color expansion header.

=== Close look of ROCK 3C ===

[[File:Rock3C_top_800px.png | 400px]][[File:Rock3C_bottom_800px.png|400px]]

=== <span id="get_start_specs"></span> Features ===

{| class="wikitable"
! Item
! colspan="1" width=80% | ROCK 3C
|-
!SoC<br><br>CPU<br>GPU
| colspan="2" | '''RK3566''' <br><br>Quad-core Cortex-A55, frequency 1.6Ghz<br>
Mali G52<br>
|-
! Memory
| colspan="2" | 1/2/4GB LPDDR4 2112MT/s
|-
! Storage
| colspan="2" | eMMC<br>μSD card (μSD slot supports up to 128 GB μSD card)<br />M.2 2230 SSD (M.2 connector supports up to 1TB M2 NVME SSD)
|-
! Display
| colspan="2" | HDMI 2.0 up to 1920x1080 60p<br />MIPI DSI 2 lanes via FPC connector<br />HDMI and MIPI DSI can not work at the same time
|-
! Audio
| colspan="2" | 3.5mm jack with mic<br />HD codec that supports up to 24-bit/96KHz audio.
|-
! Camera
| colspan="2" | MIPI CSI 2 lanes via FPC connector, support up to 800 MP camera.
|-
! Wireless
| colspan="2" | 802.11 ac WiFi 5/ BT 5
|-
! USB
| colspan="2" | USB 2.0 OTG X1(middle upper one), hardware switch for host/device switch<br />USB 3.0 HOST X1<br />USB 2.0 HOST X2
|-
! Ethernet
| colspan="2" | GbE LAN with Power over Ethernet (PoE) support<br />additional HAT is required for powering from PoE
|-
! IO
| colspan="2" | 40-pin expansion header<br />5 x UART<br />1 x SPI bus<br />2 x I2C bus<br />6 x PWM<br />1 x ADC<br /> 6 x GPIO<br />2 x 5V DC power in<br />1 x 3.3V DC power in
|-
! Others
| colspan="2" | RTC<br />RTC battery connector for time backup(optional)
|-
! Power
| colspan="2" | USB type C 5V, 5V/3A is suggested when using without SSD, 5V/5A is suggested when using with SSD.
|-
! Size
| colspan="2" | 85mm x 56mm
|}

=== Getting start guide ===

Follow the [[Rock3/getting_started/rock-3c | Guide]] to start using your ROCK 3C.

=== Use Radxa Debian ===

Follow the [[Rock3/Debian | Radxa Debian Guide]]

=== Download and install third party OS ===

Find [[Rock3/downloads | more OS]] by the Radxa friends and the community.

=== Find supported accessories ===

Discover the [[Rock3/hardware#accessories | accessories]] that just work on ROCK 3A

=== Learn more about the hardware details ===

Learn more about the ROCK 3A [[Rock3/hardware/3a | connectors and pinout]]

Check the [[Rock3/hardware#datasheet | data sheets]] of the components used on ROCK 3C.

</div> 

<div class="col-md-4 ">

<div class="thumbnail ">[[File:Start_3c.png | 440px]]</div>

<div class="panel panel-hearts-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i>[[rock3/getting_started | Setup/Quick start ]]</h3> </div>
<div class="panel-body">
* [[rock3/getting_started/rock-3c | Getting started with ROCK 3C]], including what you need and how to get it booted.
* [[rock3/hardware/3c/gpio | ROCK 3C GPIO pinout]]
</div>
</div> 

<div class="panel panel-mango-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">
{{Community_updates}}
</div>
</div> 

<div class="panel panel-cocktail-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-users"></i> Community</h3></div>
<div class="panel-body">
* Forum: http://forum.radxa.com
* Discord: https://rock.sh/go
* QQ Group: 591048098
* [[Rockpi4/contribute | How to contribute to this wiki, refer ROCK Pi 4 contribution page]]
</div>
</div> 

</div> 

</div>

Rock5/hardware

2024-03-21T10:59:44Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/hardware}}

__NOTOC__

<div class="col-md-12">
<h3 class="brand-name text-center" style="margin-top:0px;"><span class="label flame">Hardware</span></h3>
<hr class="tagline-divider" />
<h5 class="text-center" style="margin-bottom:20px;">Technical information about ROCK 5 Series hardware</h5>
</div>

<div class="col-md-12 ">
<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">SBC </h3> </div>
</div>
</div>

<div class="col-md-6">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">[https://docs.radxa.com/en/rock5/rock5a/hardware ROCK 5A]</h3> </div>
<div class="panel-body">

* [https://docs.radxa.com/en/rock5/rock5a/hardware ROCK 5 Model A]

* V1.1
** [https://dl.radxa.com/rock5/5a/docs/hw/radxa_rock5a_X1.11_2D.dxf v1.1 2D dxf] - Download ROCK 5A v1.1 2D files
** [https://dl.radxa.com/rock5/5a/docs/hw/radxa_rock5a_V1.1_sch.pdf v1.1 schematic pdf] - Download Schematic of ROCK 5A V1.1
** [https://dl.radxa.com/rock5/5a/docs/hw/radxa_rock5a_V1.1_smd.pdf v1.1 SMD pdf] - Download components Position Reference of ROCK 5A V1.1

* [https://docs.radxa.com/en/rock5/rock5a/hardware/rock5a-gpio ROCK 5A GPIO]

</div>
</div>
</div>

<div class="col-md-6">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">[https://docs.radxa.com/en/rock5/rock5b/hardware ROCK 5B]</h3> </div>
<div class="panel-body">

*[https://docs.radxa.com/en/rock5/rock5b/hardware-design/hardware-interface ROCK 5 Model B]

* V1.3(Developer Edition)
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_sch.pdf v1.3 schematic pdf] - Download Schematic of ROCK 5B Developer Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/ROCK5B_V13_2D_20220519.zip v1.3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 5B Developer Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_smd.pdf v1.3 SMD pdf] - Download components Position Reference of ROCK 5B Developer Edition

* V1.41(Pre Production Edition)
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_sch.pdf v1.3 schematic pdf] - Download Schematic of ROCK 5B Pre Production Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v141_dimension_20220728_dxf.zip v1.41 2D Top&Bottom dxf], [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v141_dimension_20220728_pdf.zip v1.41 2D Top&Bottom pdf] - Download 2D CAD of ROCK 5B Pre Production Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_smd.pdf v1.3 SMD pdf] - Download components Position Reference of ROCK 5B Pre Production Edition

* V1.42
** [https://dl.radxa.com/rock5/5b/docs/hw/ROCK5B_v1.42_3D.step.zip v1.42 3D stp] - Download ROCK 5B v1.42 3D files
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock_5b_v1423_sch.pdf v1.42 schematic pdf] - Download Schematic of ROCK 5B V1.42
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock_5b_v1423_smd.pdf v1.42 SMD pdf] - Download components Position Reference of ROCK 5B V1.42

* [https://docs.radxa.com/en/rock5/rock5b/app-development/gpiod ROCK 5B GPIO]

* [https://docs.radxa.com/en/compliance/rock5/rock5b Compliance]
</div>
</div>
</div>



<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">Accessories </h3> </div>
<div class="panel-body">

* [https://docs.radxa.com/en/rock5/rock5b/accessories/wifi_bt_access WiFi/BT card]
* [[rock5/hardware/microsd | microSD card]]
* [[rock5/hardware/emmc | eMMC module]]
* [[Rock5/hardware/usb3_eMMC_reader | USB3 eMMC Reader]]
* [[rock5/hardware/rtc | RTC battery]]
* [https://shop.allnetchina.cn/products/active-heat-sink-for-visionfive-sbc Compatible Heatsink]
* [[rock5/hardware/display | Display]]
* [https://docs.radxa.com/rock5/rock5a/accessories-guides/camera-4k/ Camera module]

* [[rock5/hardware/HATs | HATs]]
** [[rock5/hardware/PoE | PoE HAT]]
** [[Dual_Quad_SATA_HAT | Dual/Quad SATA HAT]]
** [[Penta_SATA_HAT | Penta SATA HAT]]

* [[rock5/hardware/spi_flash | SPI Flash]]
</div>
</div>
</div>

</div>

Rock5/hardware/emmc

2024-03-21T10:23:10Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/hardware/eMMC}}

[[rock5 | ROCK 5]] > [[rock5/hardware | Hardware]] > [[rock5/hardware/emmc | eMMC Module]]

=====[https://docs.radxa.com/en/accessories/emmc_module The latest update of this page is moved to Radxa Documentation site.]=====

=== Introduction ===

ROCK 5 doesn't come with eMMC on board. It uses the eMMC module instead. The benefits of eMMC module is that the user can choose the storage as they need, it reduces the main board SKU for us. Also, pluggable eMMC module makes switching OS possible.

=== eMMC module ===

[[File:Emmc_module_black_top.png | 100px]] [[File:Emmc_module_black_bottom.png |100px]]

'''Note''': the green PCB and black PCB are the same, just color difference.

The eMMC socket on ROCK 5 uses two B2B connector to mount the eMMC module, the connector model is [http://www.lsmtron.com/pdf/Connector&Antenna_catalog.PDF GB042 Series], one connector(34pin) for eMMC signal, the other(30pin) is for mount purpose only. This pinout of the 34pin is compatible with Odroid(Thanks Odroid for sharing their pinout).

* on ROCK 5: GB042-34P-H10 (plug-34pin) + GB042-30P-H10 (plug-30pin)
* on eMMC module: GB042-34S-H10 (socket-34pin) + GB042-30S-H10 (socket-30pin)

The eMMC chip we use is branded as Foresee, by Longsys, a Shenzhen embedded storage company, who acquired Lexar Brand in 2017.

* [https://dl.radxa.com/rockpi/docs/hw/Test_Report_NCEMASLD-32G_20180313.pdf Download Foresee eMMC chip test report]

=== Benchmarks ===

Below is the test we did on different brand eMMC chips.

==== dd ====

dd if=/dev/zero of=/dev/mmcblk1 bs=1G count=1 oflag=direct
dd if=/dev/mmcblk1 of=/dev/null bs=1G count=1

result:
<pre>

| | brand | read | write |
| ---- | --------- | ------- | -------- |
| 8G | Sandisk | 270MB/s | 39.4MB/s |
| 16G | Sandisk | 230MB/s | 79.6MB/s |
| 16G | Kingston | 160MB/s | 50.1MB/s |
| 16G | Foresee | 189MB/s | 74.4MB/s |
| 16G | Foresee | 241MB/s | 79.5MB/s |
| 32G | Sandisk | 263MB/s | 139MB/s |
| 32G | Samsung | 263MB/s | 78.3MB/s |
| 32G | Kingston | 152MB/s | 87.2MB/s |
| 64G | Sandisk | 207MB/s | 100MB/s |
| 64G | Foresee | 215MB/s | 148MB/s |
| 64G | Foresee | 194MB/s | 148MB/s |
| 128G | Toshiba | 217MB/s | 143MB/s |
| 64G | Sandisk | 295MB/s | 240MB/s |
| 32G | SiliconGo | 250MB/s | 135MB/s |

</pre>

==== fio ====

1M Seq

fio --name=write --ioengine=libaio --iodepth=4 --rw=write --bs=1M --direct=1 --size=2G --numjobs=30 --runtime=60 --group_reporting --filename=/dev/mmcblk1

fio --name=read --ioengine=libaio --iodepth=4 --rw=read --bs=1M --direct=1 --size=2G --numjobs=30 --runtime=60 --group_reporting --filename=/dev/mmcblk1

4K random

fio --name=randwrite --ioengine=libaio --iodepth=4 --rw=randwrite --bs=4K --direct=1 --size=2G --numjobs=30 --runtime=60 --group_reporting --filename=/dev/mmcblk1

fio --name=randread --ioengine=libaio --iodepth=4 --rw=randread --bs=4K --direct=1 --size=2G --numjobs=30 --runtime=60 --group_reporting --filename=/dev/mmcblk1

result:

* Check full result at [https://gist.github.com/hipboi/4751181c26670af1a53096795a13f93d Github].

=== Dimension ===

* [https://dl.radxa.com/accessories/emmc-module/emmc_module_v1.1_20190402.dxf Download 2D .dxf file for eMMC module]

=== eMMC2sd adapter ===

[[File:Emmc2sd_adapter.png | 100px]]

With eMMC2sd adapter board, the user can write the image from PC with uSD card reader.

Adapter is not detected by some Lenovo/Dell internal UHS SD card readers. Read/write speeds with this adapter are significantly lower than on ROCK 5.

=== USB3 eMMC Reader ===

* Check [[rock5/hardware/usb3_eMMC_reader| USB3 eMMC reader]] page

Rock5/hardware/microsd

2024-03-21T10:20:28Z

Hipboi:

{{rock5_header}}
{{Languages|Rock5/hardware/microsd}}

[[rock5 | ROCK 5]] > [[rock5/hardware | Hardware]] > [[rock5/hardware/microSD | microSD card]]

=====[https://docs.radxa.com/en/rock5/rock5b/accessories The latest update for the ROCK 5B accessories support is moved to Radxa Documentation site.]=====

== Compatibility warning ==

We have received user report that when using Android (tested version 20221129) with microSD card larger than 32GB, the system won't recognize it.

Currently we suspect this is specific to SanDisk brand, as we tested a Kingston 64GB microSD card without issue.

Discord [https://discord.com/channels/855634073376260096/921238019019796560/1060496540801704007 reference].

Rock5/hardware/wifi

2024-03-21T10:18:46Z

Hipboi:

=====[https://docs.radxa.com/en/rock5/rock5b/accessories/wifi_bt_access The latest update for the ROCK 5B WiFi / BT support is moved to Radxa Documentation site.]=====

ROCK 5 Model B doesn't come with on board WiFi/BT. Currently the following WiFi Cards are tested and supported by the ROCK 5 Model B.
{| class="wikitable"
|- style="font-weight:bold; background-color:#373A3C; color:#ECEEEF;"
| style="vertical-align:middle;" | NO.
| style="vertical-align:middle;" | Model
| style="vertical-align:middle;" | Chip
| style="vertical-align:middle;" | WiFi
| style="vertical-align:middle;" | BT
| WIFI Throughput
| Remark
|-
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 1
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | ROCK Pi Wireless Module A1 (SDIO+UART) --- AP6236
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | BCM43436B0
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 2.4G
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 4.2
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | up:23.5 Mbits/sec down:40.4 Mbits/sec
|
|-
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 2
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | ROCK Pi Wireless Module A2 (SDIO+UART) --- AP6256
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | BCM43456
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 2.4G&5G
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 5.0
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | up:196 Mbits/sec down: 187 Mbits/sec
|
|-
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 3
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | ROCK Pi Wireless Module A3 (SDIO+UART) --- AP6398S
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | BCM43598
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 2.4G&5G
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 5.0
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | up:336 Mbits/sec down: 315 Mbits/sec
|
|-
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 4
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | ROCK Pi Wireless Module A6s (SDIO+UART) --- AP6275S
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | BCM43752
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 2.4G&5G
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 5.0
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | up:234 Mbits/sec down: 273 Mbits/sec
|
|-
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 5
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | Radxa wireless A8
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | RTL8852BE
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 2.4G&5G&WIFI6
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 5.0
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | up:600Mbits/sec down:900 Mbits/sec
|
|-
| style="vertical-align:middle; background-color:#F5F5F5; color:#212529;" | 6
| style="vertical-align:middle; background-color:#F5F5F5; color:#212529;" | Intel 0MHK36 (PCIE+USB)
| style="vertical-align:middle; background-color:#F5F5F5; color:#212529;" | Intel 3165
| style="vertical-align:middle; background-color:#F5F5F5; color:#212529;" | 2.4G&5G
| style="vertical-align:middle; background-color:#F5F5F5; color:#212529;" | 4.2
| style="vertical-align:middle; background-color:#F5F5F5; color:#212529;" | up:283 Mbits/sec down: 334 Mbits/sec
|
|-
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 7
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | Intel 7265NGW (PCIE+USB)
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | Intel 7265
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 2.4G&5G
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 4.2
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | up:363 Mbits/sec down: 619 Mbits/sec
|
|-
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 8
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | Intel AX210 (PCIE+USB)
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | Intel AX210
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | WiFi 6
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | 5.2
| style="vertical-align:middle; background-color:#FFF; color:#212529;" | up: 859 Mbits/sec down: 813 Mbits/sec
| Just WIFI Support
|}

Tip:
When you use Radxa Wireless A8 Module, you can add some blacklist to make BT work.
<pre>
root@rock-5b:~# cat /etc/modprobe.d/blacklist.conf
blacklist pgdrv
blacklist btusb
blacklist btrtl
blacklist btbcm
blacklist btintel
</pre>

Rock5/hardware

2024-03-21T10:16:40Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/hardware}}

__NOTOC__

<div class="col-md-12">
<h3 class="brand-name text-center" style="margin-top:0px;"><span class="label flame">Hardware</span></h3>
<hr class="tagline-divider" />
<h5 class="text-center" style="margin-bottom:20px;">Technical information about ROCK 5 Series hardware</h5>
</div>

<div class="col-md-12 ">
<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">SBC </h3> </div>
</div>
</div>

<div class="col-md-6">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">[https://docs.radxa.com/en/rock5/rock5a/hardware ROCK 5A]</h3> </div>
<div class="panel-body">

* [https://docs.radxa.com/en/rock5/rock5a/hardware ROCK 5 Model A]

* V1.1
** [https://dl.radxa.com/rock5/5a/docs/hw/radxa_rock5a_X1.11_2D.dxf v1.1 2D dxf] - Download ROCK 5A v1.1 2D files
** [https://dl.radxa.com/rock5/5a/docs/hw/radxa_rock5a_V1.1_sch.pdf v1.1 schematic pdf] - Download Schematic of ROCK 5A V1.1
** [https://dl.radxa.com/rock5/5a/docs/hw/radxa_rock5a_V1.1_smd.pdf v1.1 SMD pdf] - Download components Position Reference of ROCK 5A V1.1

* [https://docs.radxa.com/en/rock5/rock5a/hardware/rock5a-gpio ROCK 5A GPIO]

</div>
</div>
</div>

<div class="col-md-6">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">[https://docs.radxa.com/en/rock5/rock5b/hardware ROCK 5B]</h3> </div>
<div class="panel-body">

*[https://docs.radxa.com/en/rock5/rock5b/hardware-design/hardware-interface ROCK 5 Model B]

* V1.3(Developer Edition)
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_sch.pdf v1.3 schematic pdf] - Download Schematic of ROCK 5B Developer Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/ROCK5B_V13_2D_20220519.zip v1.3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 5B Developer Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_smd.pdf v1.3 SMD pdf] - Download components Position Reference of ROCK 5B Developer Edition

* V1.41(Pre Production Edition)
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_sch.pdf v1.3 schematic pdf] - Download Schematic of ROCK 5B Pre Production Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v141_dimension_20220728_dxf.zip v1.41 2D Top&Bottom dxf], [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v141_dimension_20220728_pdf.zip v1.41 2D Top&Bottom pdf] - Download 2D CAD of ROCK 5B Pre Production Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_smd.pdf v1.3 SMD pdf] - Download components Position Reference of ROCK 5B Pre Production Edition

* V1.42
** [https://dl.radxa.com/rock5/5b/docs/hw/ROCK5B_v1.42_3D.step.zip v1.42 3D stp] - Download ROCK 5B v1.42 3D files
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock_5b_v1423_sch.pdf v1.42 schematic pdf] - Download Schematic of ROCK 5B V1.42
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock_5b_v1423_smd.pdf v1.42 SMD pdf] - Download components Position Reference of ROCK 5B V1.42

* [https://docs.radxa.com/en/rock5/rock5b/app-development/gpiod ROCK 5B GPIO]

* [https://docs.radxa.com/en/compliance/rock5/rock5b Compliance]
</div>
</div>
</div>



<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">Accessories </h3> </div>
<div class="panel-body">

* [[rock5/hardware/wifi | WiFi/BT card]]
* [[rock5/hardware/microsd | microSD card]]
* [[rock5/hardware/emmc | eMMC module]]
* [[Rock5/hardware/usb3_eMMC_reader | USB3 eMMC Reader]]
* [[rock5/hardware/rtc | RTC battery]]
* [https://shop.allnetchina.cn/products/active-heat-sink-for-visionfive-sbc Compatible Heatsink]
* [[rock5/hardware/display | Display]]
* [https://docs.radxa.com/rock5/rock5a/accessories-guides/camera-4k/ Camera module]

* [[rock5/hardware/HATs | HATs]]
** [[rock5/hardware/PoE | PoE HAT]]
** [[Dual_Quad_SATA_HAT | Dual/Quad SATA HAT]]
** [[Penta_SATA_HAT | Penta SATA HAT]]

* [[rock5/hardware/spi_flash | SPI Flash]]
</div>
</div>
</div>

</div>

Rock5/hardware/5b

2024-03-21T10:10:39Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/hardware}}

__NOTOC__

[[rock5 | ROCK 5]] > [[rock5/hardware | Hardware]] > [[Rock5/hardware/5b | ROCK 5B Hardware Details]]

=====[https://docs.radxa.com/en/rock5/rock5b/hardware-design/hardware-interface The latest hardware info of ROCK 5B is updated on the new Radxa Documentation site.]=====

In this page we will provide detailed hardware information of ROCK 5B.

[[File:rock-5b-hw.png | 600px | right]]

== Processor (1) ==

The SoC powers ROCK 5B is Rockchip RK3588. The main system CPU is a Quad-core ARM Cortex-A76 MPCore processor and quad-core ARM Cortex-A55 MPCore processor, both are high-performance, low-power and cached application processor. Embedded ARM Mali-G610 MP4 3D GPU makes RK3588 completely compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2. Special 2D hardware engine with MMU will maximize display performance and provide very smoothly operation. The build-in NPU supports INT4/INT8/INT16/FP16 hybrid operation and computing power is up to 6TOPs. In addition, with its strong compatibility, network models based on a series of frameworks such as TensorFlow/MXNet/PyTorch/Caffe can be easily converted.

== RAM (2) ==

The ram for ROCK 5B is LPDDR 4x, two 32bits LPDDR 4x chips make 64bits, data frequency is up to 4224Mhz. ROCK 5B offers 4GB, 8GB and 16GB ram size options.

== USB Power (3) ==

The Radxa ROCK 5 Model B is designed to be an ARM desktop Single Board Computer with low power consumption. It supports the following power input:

* USB '''PD2.0''' power adapter which support 5v with 5A current or 12V/15V/20V with 2A current or higher output
** See [[Rock5/5b/power_supply | Power supply]] for a power supply compatibility list
** Many power supply won't deliver more than 3 amps at 5v even if the wattage on other voltages are higher.
* Power adapter with fixed 9V to 20V DC voltage and USB C plug
* 5V PoE power from the GPIO PIN 2 & 4

== HDMI Output (4 / 5) ==

== HDMI Input (6) ==

== USB2.0 (7) ==

== USB3.0 (8) ==

== 2.5GbE (9) ==

== PoE (10) ==

== M.2 E-KEY (11) ==

M.2 E Key pin signal definition table.

{| class="wikitable" style="vertical-align:middle;"
|-
! Pin#
! Name
|-
| 1
| GND
|-
| 2
| VCC3V3_WF
|-
| 3
| USB2_M2_DP
|-
| 4
| VCC3V3_WF
|-
| 5
| USB2_M2_DM
|-
| 6
| WIFI_LED
|-
| 7
| GND
|-
| 8
| PCM_CLK/I2S_SCK
|-
| 9
| SDIO_CLK
|-
| 10
| PCM_SYNC/I2S_WS
|-
| 11
| SDMMC2_CMD_M0
|-
| 12
| PCM_OUT/I2S SD_OUT
|-
| 13
| SDMMC2_D0_M0
|-
| 14
| PCM_IN/I2S SD_IN
|-
| 15
| SDMMC2_D1_M0
|-
| 16
| NC
|-
| 17
| SDMMC2_D2_M0
|-
| 18
| GND
|-
| 19
| SDMMC2_D3_M0
|-
| 20
| BT_WAKE_HOST_H_GPIO4_B4
|-
| 21
| WIFI_WAKE_HOST_H_GPIO3_D5
|-
| 22
| UART1_RX_M0
|-
| 23
| WIFI_REG_ON_H_GPIO3_D4
|-
| 32
| UART1_TX_M0
|-
| 33
| GND
|-
| 34
| UART1_CTS_M0
|-
| 35
| PCIE_TXP
|-
| 36
| UART1_RTS_M0
|-
| 37
| PCIE_TXN
|-
| 38
| NC
|-
| 39
| GND
|-
| 40
| NC
|-
| 41
| PCIE20_RXP
|-
| 42
| BT_REG_NO
|-
| 43
| PCIE20_RXN
|-
| 44
| NC
|-
| 45
| GND
|-
| 46
| NC
|-
| 47
| PCIE20_REFCLKP
|-
| 48
| NC
|-
| 49
| PCIE20_REFCLKN
|-
| 50
| WIFIBT_32KIN_1T1R
|-
| 51
| GND
|-
| 52
| PCIE_PERSTN
|-
| 53
| PCIE_CLKREQN
|-
| 54
| HOST_WAKE_BT_H
|-
| 55
| PCIE_WAKEN
|-
| 56
| BT_REG_ON_H
|-
| 57
| GND
|-
| 58
| I2C4_SDA_M1
|-
| 59
| NC
|-
| 60
| I2C4_SCL_M1
|-
| 61
| NC
|-
| 62
| NC
|-
| 63
| GND
|-
| 64
| NC
|-
| 65
| NC
|-
| 66
| NC
|-
| 67
| NC
|-
| 68
| NC
|-
| 69
| GND
|-
| 70
| BT_WAKE
|-
| 71
| NC
|-
| 72
| VCC3V3_WF
|-
| 73
| NC
|-
| 74
| VCC3V3_WF
|-
| 75
| GND
|-
| 76
| GND
|-
| 77
| GND
|-
| 78
| NC
|-
| 79
| NC
|}

== M.2 M-KEY (12) ==

== eMMC (13) ==

===== Socket on Board Interface Feature =====

The high performance eMMC module is the best choice as the system storage for ROCK 5B. The eMMC module with 8GB/16GB/32GB/64GB/128GB is available.

The eMMC Socket pin specification shows below.

{| class="wikitable"
|-
! Name || Pin# || || Pin# || Name
|-
| GND || 1 || || 34 || GND
|-
| EMMC_D5 || 2 || || 33 || EMMC_D6
|-
| GND || 3 || || 32 || GND
|-
| EMMC_D4 || 4 || || 31 || EMMC_D7
|-
| GND || 5 || || 30 || GND
|-
| EMMC_D0 || 6 || || 29 || EMMC_D1
|-
| GND || 7 || || 28 || GND
|-
| EMMC_CLK || 8 || || 27 || EMMC_D2
|-
| GND || 9 || || 26 || GND
|-
| EMMC_D3 || 10 || || 25 || EMMC_CMD
|-
| GND || 11 || || 24 || GND
|-
| EMMC_RSTN || 12 || || 23 || VCC3V3_SYS
|-
| GND || 13 || || 22 || VCC3V3_SYS
|-
| GND || 14 || || 21 || VCC_1V8
|-
| EMMC_RCLK || 15 || || 20 || VCC_1V8
|-
| GND || 16 || || 19 || GND
|-
| GND || 17 || || 18 || GND
|}

== TF (14) ==

The TF card can be used as a system storage or an external storage.

When it's used as a system storage, you had better choose the ones with storage space larger than 8GB.

When it's used as an external storage, you can choose the ones with storage space up to 128GB.

When the TF card is inserted into the TF card slot , the device will be automatically recognized by the system.

The TF card interface pin specification shows below.

{| class="wikitable"
|-
! Pin# || Name
|-
| 1 || SDMMC0_D2
|-
| 2 || SDMMC0_D3
|-
| 3 || SDMMC0_CMD
|-
| 4 || VCC3V3_SYS
|-
| 5 || SDMMC0_CLK
|-
| 6 || GND
|-
| 7 || SDMMC0_D0
|-
| 8 || SDMMC0_D1
|-
| 9 || SDMMC0_DET_L
|-
| 10 || GND
|-
| 11 || GND
|-
| 12 || GND
|-
| 13 || GND
|}

== Headphone (15) ==

== MIPI CSI (16) ==

== MIPI DSI (17) ==

== 40-pin Header (18) ==

Please see [[rock5/hardware/5b/gpio | ROCK 5B GPIO pinout]].

== SPI Nor Flash (19) ==

== RTC Battery (20) ==

The RTC connector is designed according to the standard connector type.

You can distinguish '+3.3V' and '-' from the silk screen on the board.

{| class="wikitable"
! Pin#
! Name
|-
| 1
| GND
|-
| 2
| +3.3V
|}

== Recovery Button (21) ==

ROCK 5B supports loader mode, which is a special operation mode for CPU to wait for USB OTG port command.

Recovery button is used for upgrade image on SPI Nor Flash or eMMC on board.

Below is the steps of booting device into loader mode.
* Make sure that u-boot images are pre-installed on SPI Nor Flash or eMMC
* Press and hold the recovery button
* Plug the USB Male A to Male C cable to ROCK 5B Type-C port, the other side to PC
* Wait for about 5 seconds
* Confirm that ROCK 5B is in loader mode
For macOS PC: Bus 000 Device 004: ID 2207:350b Fuzhou Rockchip Electronics Co., Ltd. USB download gadget Serial: b021125bbff6ef30
For Linux PC: Bus 001 Device 034: ID 2207:350b Fuzhou Rockchip Electronics Company USB download gadget
For Windows PC: Open RKDevTool and you would see "Found One LOADER Device".

== Power Button (22) ==

The power button is used to turn the device on or off.

Short-pressing power button would power on/off the device. This is what we called power on/off via software.

Power button also provides function of hardware power on/off the device.
When the system is crashed, you can shutdown the device via this method. Press and hold the power button for at least 6 seconds. Then release the power button. After that short press power button would power on the device.

== RGB LED (23) ==

== Fan (24) ==

Definition table (From top to bottom in the picture)

{| class="wikitable"
! Pin#
! Name
|-
| 1
| +5.0V
|-
| 2
| GND
|}

== Maskrom Button (25) ==

ROCK 5B supports Maskrom mode, which is a special operation mode for CPU to wait for USB OTG port command.

Maskrom button is needed when writing the images to SPI Nor Flash or eMMC on board.

To boot ROCK 5B into maskrom mode, try the following steps.

* Press and hold the Maskrom key
* Plug the USB Male A to Male C cable to ROCK 5B Type-C port, the other side to PC
* Confirm that ROCK 5B is in Maskrom mode .
** For macOS host: lsusb result: Bus 000 Device 004: ID 2207:350b Fuzhou Rockchip Electronics Co., Ltd. Composite Device
** For Linux host: lsusb result: Bus 001 Device 030: ID 2207:350b Fuzhou Rockchip Electronics Company
** For Windows host: Open RKDevTool and you would see the device is in Found One MASKROM Device.
[[File:emmc_down_start.png]]

Rock5/hardware

2024-03-21T10:09:15Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/hardware}}

__NOTOC__

<div class="col-md-12">
<h3 class="brand-name text-center" style="margin-top:0px;"><span class="label flame">Hardware</span></h3>
<hr class="tagline-divider" />
<h5 class="text-center" style="margin-bottom:20px;">Technical information about ROCK 5 Series hardware</h5>
</div>

<div class="col-md-12 ">
<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">SBC </h3> </div>
</div>
</div>

<div class="col-md-6">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">[https://docs.radxa.com/en/rock5/rock5a/hardware ROCK 5A]</h3> </div>
<div class="panel-body">

* [[rock5/hardware/5a | ROCK 5 Model A]]

* V1.1
** [https://dl.radxa.com/rock5/5a/docs/hw/radxa_rock5a_X1.11_2D.dxf v1.1 2D dxf] - Download ROCK 5A v1.1 2D files
** [https://dl.radxa.com/rock5/5a/docs/hw/radxa_rock5a_V1.1_sch.pdf v1.1 schematic pdf] - Download Schematic of ROCK 5A V1.1
** [https://dl.radxa.com/rock5/5a/docs/hw/radxa_rock5a_V1.1_smd.pdf v1.1 SMD pdf] - Download components Position Reference of ROCK 5A V1.1

* [[rock5/hardware/5a/gpio | ROCK 5A GPIO]]

</div>
</div>
</div>

<div class="col-md-6">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title">[https://docs.radxa.com/en/rock5/rock5b/hardware ROCK 5B]</h3> </div>
<div class="panel-body">

*[[rock5/hardware/5b | ROCK 5 Model B]]

* V1.3(Developer Edition)
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_sch.pdf v1.3 schematic pdf] - Download Schematic of ROCK 5B Developer Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/ROCK5B_V13_2D_20220519.zip v1.3 2D Top&Bottom dxf] - Download 2D CAD of ROCK 5B Developer Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_smd.pdf v1.3 SMD pdf] - Download components Position Reference of ROCK 5B Developer Edition

* V1.41(Pre Production Edition)
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_sch.pdf v1.3 schematic pdf] - Download Schematic of ROCK 5B Pre Production Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v141_dimension_20220728_dxf.zip v1.41 2D Top&Bottom dxf], [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v141_dimension_20220728_pdf.zip v1.41 2D Top&Bottom pdf] - Download 2D CAD of ROCK 5B Pre Production Edition
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock5b_v13_smd.pdf v1.3 SMD pdf] - Download components Position Reference of ROCK 5B Pre Production Edition

* V1.42
** [https://dl.radxa.com/rock5/5b/docs/hw/ROCK5B_v1.42_3D.step.zip v1.42 3D stp] - Download ROCK 5B v1.42 3D files
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock_5b_v1423_sch.pdf v1.42 schematic pdf] - Download Schematic of ROCK 5B V1.42
** [https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock_5b_v1423_smd.pdf v1.42 SMD pdf] - Download components Position Reference of ROCK 5B V1.42

* [[rock5/hardware/5b/gpio | ROCK 5B GPIO]]

* Compliance
** [https://dl.radxa.com/rock5 CE RED] - EU
</div>
</div>
</div>



<div class="col-md-12">
<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title">Accessories </h3> </div>
<div class="panel-body">

* [[rock5/hardware/wifi | WiFi/BT card]]
* [[rock5/hardware/microsd | microSD card]]
* [[rock5/hardware/emmc | eMMC module]]
* [[Rock5/hardware/usb3_eMMC_reader | USB3 eMMC Reader]]
* [[rock5/hardware/rtc | RTC battery]]
* [https://shop.allnetchina.cn/products/active-heat-sink-for-visionfive-sbc Compatible Heatsink]
* [[rock5/hardware/display | Display]]
* [https://docs.radxa.com/rock5/rock5a/accessories-guides/camera-4k/ Camera module]

* [[rock5/hardware/HATs | HATs]]
** [[rock5/hardware/PoE | PoE HAT]]
** [[Dual_Quad_SATA_HAT | Dual/Quad SATA HAT]]
** [[Penta_SATA_HAT | Penta SATA HAT]]

* [[rock5/hardware/spi_flash | SPI Flash]]
</div>
</div>
</div>

</div>

Rock5/hardware/5a

2024-03-21T10:07:58Z

Hipboi: /* 40-pin Header (17) */

{{rock5_header}}
{{Languages|rock5/hardware}}

__NOTOC__

[[rock5 | ROCK 5]] > [[rock5/hardware | Hardware]] > [[Rock5/hardware/5a | ROCK 5A Hardware Details]]

In this page we will provide detailed hardware information of ROCK 5A.

[[File:rock-5a-hw.png | 600px | right]]

== 40-pin Header (17) ==

Please see [https://docs.radxa.com/en/rock5/rock5a/hardware/rock5a-gpio ROCK 5A GPIO pinout].

Rock5/getting started

2024-03-21T10:07:00Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/getting_started}}

__NOTOC__

<div class="col-md-12">
<h3 class="brand-name text-center" style="margin-top:0px;"><span class="label flame">Getting started</span></h3>
<hr class="tagline-divider" />
<h5 class="text-center" style="margin-bottom:20px;">Choose your ROCK5 model to start</h5>
</div>

<div class="col-md-12 ">

<div class="col-md-3">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [https://docs.radxa.com/en/rock5/rock5a/getting-started ROCK 5A]</h3> </div>
<div class="panel-body">
<div class="thumbnail ">[[File:Start_5a.png | 300px | link=https://docs.radxa.com/en/rock5/rock5a/getting-started]]</div>
</div>
</div>
</div>

<div class="col-md-3">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [https://docs.radxa.com/en/rock5/rock5b/getting-started ROCK 5B]</h3> </div>
<div class="panel-body">
<div class="thumbnail ">[[File:Start_5b.png | 300px | link=https://docs.radxa.com/en/rock5/rock5b/getting-started]]</div>
</div>
</div>
</div>

</div>

Rock5/5b/getting started

2024-03-21T10:04:07Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/5b/getting_started}}

[[rock5 | ROCK 5]] > [[Rock5/5b | ROCK 5 Model B]] > [[Rock5/5b/getting_started | Getting started]]

__TOC__

= Getting Started =

===== [https://docs.radxa.com/en/rock5/rock5b/getting-started Please refer to the new Radxa Documentation site for getting started with ROCK 5B.] =====

This guide is designed for ROCK 5B enthusiast. The purpose is to learn about ROCK 5B as well as how to prepare and set up for basic use.
When you get a board, you need to know what model it is and which hardware version it is.
The information is printed in the top side of the board. We will introduce the board information as much as possible.

== Close look of ROCK 5B ==
* ROCK 5B front view
[[File:Rock5b-v142-top.jpg|500px]]

* ROCK 5B front with an angle view
[[File:Rock5b-v142-angel.jpg|500px]]

* ROCK 5B back view
[[File:Rock5b-v142-bottom.jpg|500px]]

For the detailed hardware description and pinout, please refer [[Rock5/hardware/5b | ROCK 5B hardware page]].

== <span id="get_start_specs"></span> Features ==

== What you need ==

=== Necessary ===
* ROCK 5B main board

* One of the Storage media below:
** microSD, larger than 8GB
** eMMC module, larger than 8GB

* [[rock5/5b/power_supply | Power supply]]
** The ROCK 5B is powered by Type-C port and has a wide range of input voltage, from 5V to 21V. ROCK 5B supports USB Type-C PD 2.0 with 9V/2A, 12V/2A, 15V/2A and 20V/2A.
** The Type-C cable you using needs to support data communication. We call it USB Type-C charging data cable.

* USB Keyboard and Mouse
** With four USB-A connectors, ROCK 5B can be equipped with a full sized keyboard and mouse.

* Monitor and HDMI Cable
** ROCK 5B is equipped with a full sized HDMI connector. HDMI capable monitor is recommended.
** HDMI EDID display data is used to determine the best display resolution. On monitors and TVs that support 1080p (or 4K/8K) this resolution will be selected. If 1080p is not supported the next available resolution reported by EDID will be used. This selected mode will work with MOST but not all monitors/TVs.

*USB to TTL serial cable
**ROCK 5B exports a dedicated serial console for CPU, which can access the low level debug message.

*USB type A to type C cable
**If you want to write image on ROCK 5B from USB OTG port or use fastboot/adb commands you need an USB type A to type C cable to connect ROCK 5B and PC.

=== Optional ===

* microSD Card Reader
** For flashing the image to the microSD Card

* Ethernet cable
** ROCK 5B supports internet access via Ethernet.
** An Ethernet cable is used to connect your ROCK 5B to a local network and the Internet.

* USB type A to type C cable
** This is needed for fastboot/adb commands and the maskrom mode for advanced flashing.

* USB to TTL serial cable
** This is needed for serial console.

* Camera Module
** ROCK 5B supports camera function.

* LCD Module
** ROCK 5B supports LCD display function.

* Audio cable
** Audio can be played through speaker or headphones using a standard 3.5mm jack.

* [[rock5/hardware/wifi | WiFi/BT Cards]]

== Starting the board for the first time ==

ROCK 5B can be started with eMMC Module or μSD Card. Now, you are presented with three options when installing your new operating system onto your ROCK 5B.

=== Prepare ===
* When starting system with eMMC Module
(Option a) Insert the eMMC Module into ROCK Pi eMMC USB Reader. Then plug the ROCK Pi eMMC USB Reader into host PC.

(Option b) Insert eMMC Module into eMMC to μSD card converter board. Insert the converter board into μSD Card Reader. Then plug the Card Reader into host PC.

* When starting system with μSD Card
(Option c) Insert the μSD Card into μSD Card Reader. Then plug the Card Reader into host PC.

=== Write Image ===

* Download the official Ubuntu/Debian system image from [[rock5/downloads | Downloads]].

* Download the flash tool, etcher, from [[rock5/downloads | Downloads]]. Choose the right version for your host operation system. Here we operate on host Ubuntu 20.04.

* After unpacking the package, we run the tool by double-clicking BalenaEtcher icon.

If you get an error message: "No polkit authentication agent found" you can try and start it with sudo, but do know that this is running the tool as '''root'''.

* In the etcher window, click '''Select image'''.

[[File:etcher-rock-5b-1.png]]

* In the etcher window, click '''Select Drive'''.

[[File:etcher-rock-5b-2.png]]

* In the etcher window, click '''Flash'''.

[[File:etcher-rock-5b-3.png]]

* In the etcher window, once it shows us Flash Complete! It is done and can be put into the RockPi.

[[File:etcher-rock-5b-4.png]]

=== 3. Boot the board ===

* Now insert the system storage media, μSD Card or eMMC Module into the socket on the board.

* (Optional) Use the USB to TTL serial cable to setup a connection between PC and ROCK 5B board. See [[rock5/dev/serial-console | Serial Console]].

* Power on ROCK 5B by adapter with type C port.

* ROCK 5B will boot with the green power LED on. And after a while, another blue LED starts blinking.

=== 4. Access from the Host PC/Laptop ===

==== Option 1: HDMI monitor and Mouse ====

You would see Desktop on HDMI monitor.

==== Option 2: Serial console ====

Check [[rock5/dev/serial-console | Serial Console]]

==== Option 3: SSH ====
SSH server is enabled on port 22 of ROCK 5B default image.

Please use [https://angryip.org/ angryip] to find your board IP address.

To access ROCK 5B by SSH, try

ping rock-5b.local
ssh rock@rock-5b.local

or if your router/network doesn't support Local Domain, you need to check your network/router administrator page and look for the ROCK 5B ip address.

ping ip-of-device
ssh rock@ip-of-device

Note: You can also get the IP of ROCK 5B from option 1 if you can not access network administrator page.

=== 5.Network state ===

*Look at network configure:

$ sudo ifconfig

*Test network:

$ ping -c 5 www.google.com

=== 6.WIFI Connection ===

Check [[rock5/linux/debian#wifi-connection | WIFI Connection]].

=== 7.BT ===

Check [[rock5/linux/debian#BT | BT]].

=== 8.LED ===

ROCK 5B has Power LED and User LED.

* Power LED

The power LED is green. It is always on when ROCK 5B is connected to any power source.

* User LED

The user LED is blue. By default, its blink status shows the running kernel.

=== 9.GPIO ===

ROCK 5B has one 40-pin expansion headers. Each pin is distinguished by color, more information click [[rock5/hardware/5b/gpio | ROCK 5B GPIO]].

Development for GPIO. ROCK 5B supports libmraa GPIO library, click [[rock5/dev/libmraa | here]] to get more information.

== Next Step ==

* [[rock5/linux/debian | More Debian image usage and tips]]
* [[rock5/hardware | Checkout the hardware details]]
* Join the [https://forum.radxa.com/c/rock3 community] and the [https://t.me/rockpi4 discussion group]

<br>

Rock5/5a/getting started

2024-03-21T10:02:53Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/3a/getting_started}}

[[rock5 | ROCK 5]] > [[Rock5/5a | ROCK 5 Model A]] > [[Rock5/5a/getting_started | Getting started]]

__TOC__

= Getting Started =

===== [https://docs.radxa.com/en/rock5/rock5a/getting-started Please refer to the new Radxa Documentation site for getting started with ROCK 5A.] =====

This guide is designed for ROCK 5A enthusiast. The purpose is to learn about ROCK 5A as well as how to prepare and set up for basic use.
When you get a board, you need to know what model it is and which hardware version it is.
The information is printed in the top side of the board.
We will introduce the board information as much as possible.

Rock5/5B

2024-03-21T10:00:29Z

Hipboi:

{{rock5_header}}

{{Languages|rock5/5B}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-8 ">

= ROCK 5 Model B=

===== [https://docs.radxa.com/en/rock5/rock5b Please refer to the new Radxa Documentation site for the latest ROCK 5B Documentation.] =====

This is the old wiki for ROCK 5 Model B, written by Radxa Team with community contributions.

ROCK5 is a series of Rockchip RK3588(s) based SBC(Single Board Computer) by [[Special:SpecialContact/| Radxa]]. It can run Linux, Android, BSD and other distributions.

ROCK5 comes in two models, Model A and Model B. Both models offer 4GB, 8GB, 16GB and '''32GB''' options. For detailed difference between Model A and Model B, please check [[Rock5/getting_started#get_start_specs | Specifications]].

ROCK5 features a Octa core ARM processor(4x Cortex-A76 + 4x Cortex-A55), 64bit 3200Mb/s LPDDR4, up to 8K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, 2.5 GbE LAN, PCIe 3.0, PCIe 2.0, 40-pin color expansion header, RTC. Also, ROCK5 supports USB PD and QC powering.

</div> 

<div class="col-md-4 ">

<div class="thumbnail ">[[File:Start_5b.png | 440px | link=rock5/5b]]</div>

<div class="panel panel-hearts-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [[rock5/getting_started | Setup/Quick start ]]</h3> </div>
<div class="panel-body">
* [[rock5/5b/getting_started | Getting started with ROCK 5B]], including what you need and how to get it booted.
</div>
</div> 

<div class="panel panel-mango-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">
{{Community_updates}}
</div>
</div> 

<div class="panel panel-cocktail-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-users"></i> Community</h3></div>
<div class="panel-body">
* Forum: http://forum.radxa.com
* Discord: https://rock.sh/go
* QQ Group: 591048098
* [[Rockpi4/contribute | How to contribute to this wiki, refer ROCK Pi 4 contribution page]]
* Wechat Group:[[File:We5b.jpg | 120px]]
</div>
</div> 

</div> 

</div>

Rock5/5a

2024-03-21T09:59:42Z

Hipboi: /* ROCK 5 Model A */

{{rock5_header}}

{{Languages|rock5/5a}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-8 ">

= ROCK 5 Model A =

===== [https://docs.radxa.com/en/rock5/rock5a Please refer to the new Radxa Documentation site for the latest ROCK 5A Documentation.] =====

This is the old wiki for ROCK 5 Model A, written by Radxa Team with community contributions.

ROCK5 is a series of Rockchip RK3588(s) based SBC(Single Board Computer) by [[Special:SpecialContact/| Radxa]]. It can run Linux, Android, BSD and other distributions.

ROCK5 comes in two models, Model A and Model B. Both models offer 4GB, 8GB, 16GB and '''32GB''' options. For detailed difference between Model A and Model B, please check [[Rock5/getting_started#get_start_specs | Specifications]].

ROCK5 features a Octa core ARM processor(4x Cortex-A76 + 4x Cortex-A55), 64bit 3200Mb/s LPDDR4, up to 8K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, 2.5 GbE LAN, PCIe 3.0, PCIe 2.0, 40-pin color expansion header, RTC. Also, ROCK5 supports USB PD and QC powering.

</div> 

<div class="col-md-4 ">

<div class="thumbnail ">[[File:Start_5a.png | 440px | link=rock5/5a]]</div>

<div class="panel panel-hearts-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [[rock5/getting_started | Setup/Quick start ]]</h3> </div>
<div class="panel-body">
* [[rock5/5a/getting_started | Getting started with ROCK 5A]], including what you need and how to get it booted.
</div>
</div> 

<div class="panel panel-mango-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">
{{Community_updates}}
</div>
</div> 

<div class="panel panel-cocktail-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-users"></i> Community</h3></div>
<div class="panel-body">
* Forum: http://forum.radxa.com
* Discord: https://rock.sh/go
* QQ Group: 591048098
* [[Rockpi4/contribute | How to contribute to this wiki, refer ROCK Pi 4 contribution page]]
* Wechat Group:[[File:We5b.jpg | 120px]]
</div>
</div> 

</div> 

</div>

Rock5/5a

2024-03-21T09:59:21Z

Hipboi:

{{rock5_header}}

{{Languages|rock5/5a}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-8 ">

= ROCK 5 Model A =

===== [https://docs.radxa.com/en/rock5/rock5a Please refer to the new Radxa Documentation site for the latest ROCK 5A Documentation.] =====

This is the documentation for ROCK 5 Model A, written by Radxa Team with community contributions.

ROCK5 is a series of Rockchip RK3588(s) based SBC(Single Board Computer) by [[Special:SpecialContact/| Radxa]]. It can run Linux, Android, BSD and other distributions.

ROCK5 comes in two models, Model A and Model B. Both models offer 4GB, 8GB, 16GB and '''32GB''' options. For detailed difference between Model A and Model B, please check [[Rock5/getting_started#get_start_specs | Specifications]].

ROCK5 features a Octa core ARM processor(4x Cortex-A76 + 4x Cortex-A55), 64bit 3200Mb/s LPDDR4, up to 8K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, 2.5 GbE LAN, PCIe 3.0, PCIe 2.0, 40-pin color expansion header, RTC. Also, ROCK5 supports USB PD and QC powering.

</div> 

<div class="col-md-4 ">

<div class="thumbnail ">[[File:Start_5a.png | 440px | link=rock5/5a]]</div>

<div class="panel panel-hearts-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [[rock5/getting_started | Setup/Quick start ]]</h3> </div>
<div class="panel-body">
* [[rock5/5a/getting_started | Getting started with ROCK 5A]], including what you need and how to get it booted.
</div>
</div> 

<div class="panel panel-mango-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">
{{Community_updates}}
</div>
</div> 

<div class="panel panel-cocktail-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-users"></i> Community</h3></div>
<div class="panel-body">
* Forum: http://forum.radxa.com
* Discord: https://rock.sh/go
* QQ Group: 591048098
* [[Rockpi4/contribute | How to contribute to this wiki, refer ROCK Pi 4 contribution page]]
* Wechat Group:[[File:We5b.jpg | 120px]]
</div>
</div> 

</div> 

</div>

Rock5

2024-03-21T09:58:26Z

Hipboi:

{{rock5_header}}
{{Languages|rock5}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-6">
=ROCK5=

===== [https://docs.radxa.com/en/rock5 Please refer to the new Radxa Documentation site for the latest ROCK 5 Documentation.] =====

This is the old wiki for ROCK5 family, written by Radxa Team with community contributions.

ROCK5 is the 5th generation of SBC(Single Board Computer) designed by [[Special:SpecialContact/| Radxa]]. It can run Linux, Android, BSD and other distributions.

ROCK5 is powered by Rockchip RK3588(s) SoC with a Oct core ARM processor(4x Cortex-A76 + 4x Cortex-A55), up to 32GB 64bit LPDDR4X ram, up to 8K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, GbE LAN, PCIe 3.0 x4, PCIe 2.0, 40-pin color expansion header, RTC. Also, ROCK5 supports USB PD power with display alt mode.

</div>

<div class="col-md-6 ">

<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">

{{Community_updates}}

</div>
</div>

</div>
</div>

<div class="col-md-12 ">

<div class="col-md-3">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [[rock5/5a | ROCK 5A]]</h3> </div>
<div class="panel-body">
<div class="thumbnail ">[[File:Start_5a.png | 300px | link=rock5/5a]]</div>
Credit card size computer
</div>
</div>
</div>

<div class="col-md-3">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [[rock5/5b | ROCK 5B]]</h3> </div>
<div class="panel-body">
<div class="thumbnail ">[[File:Start_5b.png | 300px | link=rock5/5b]]</div>
ARM desktop computer
</div>
</div>
</div>

</div>

Rock5

2024-03-21T09:57:55Z

Hipboi: /* ROCK5 */

{{rock5_header}}
{{Languages|rock5}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-6">
=ROCK5=

== [https://docs.radxa.com/en/rock5 Please refer to the new Radxa Documentation site for the latest ROCK 5 Documentation.] ==

This is the old wiki for ROCK5 family, written by Radxa Team with community contributions.

ROCK5 is the 5th generation of SBC(Single Board Computer) designed by [[Special:SpecialContact/| Radxa]]. It can run Linux, Android, BSD and other distributions.

ROCK5 is powered by Rockchip RK3588(s) SoC with a Oct core ARM processor(4x Cortex-A76 + 4x Cortex-A55), up to 32GB 64bit LPDDR4X ram, up to 8K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, GbE LAN, PCIe 3.0 x4, PCIe 2.0, 40-pin color expansion header, RTC. Also, ROCK5 supports USB PD power with display alt mode.

</div>

<div class="col-md-6 ">

<div class="panel panel-meadow-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">

{{Community_updates}}

</div>
</div>

</div>
</div>

<div class="col-md-12 ">

<div class="col-md-3">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [[rock5/5a | ROCK 5A]]</h3> </div>
<div class="panel-body">
<div class="thumbnail ">[[File:Start_5a.png | 300px | link=rock5/5a]]</div>
Credit card size computer
</div>
</div>
</div>

<div class="col-md-3">
<div class="panel panel-meadow">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [[rock5/5b | ROCK 5B]]</h3> </div>
<div class="panel-body">
<div class="thumbnail ">[[File:Start_5b.png | 300px | link=rock5/5b]]</div>
ARM desktop computer
</div>
</div>
</div>

</div>

Rock5/accessories/radxa-display-10hd

2024-03-21T09:54:53Z

Hipboi:

{{rock5_header}}

{{Languages|rock5/accessories/radxa-display-10hd}}

[[rock5 | ROCK 5]] > [[rock5/accessories | Accessories]] > [[rock5/accessories/radxa-display-10hd | How to use Radxa Display 10HD]]

__TOC__

[https://docs.radxa.com/en/accessories/lcd-8-hd/lcd-8-hd-usage Please refer the new Radxa Documentation site for how to use the Radxa Display 10 HD]

=== How to use Radxa Display 10HD ===

==== Software configuration ====

* Upgrade kernel to version at least '''5.10.110-30-rockchip'''.

# apt install -y linux-5.10-rock-5-latest

* Add one line to file /boot/config.txt. Like this.

dtoverlay=rock-5b-radxa-display-10hd

* And then execute command.

# update_extlinux.sh

* Reboot the device

==== Troubleshooting ====

* Post your issue on the forum: https://forum.radxa.com/c/rock5

Distributors

2024-01-16T13:10:45Z

Hipboi: /* China */

Currently you can buy the products of radxa from one of the distributors below.

__TOC__

=== Global Shipping ===
---------
* <h4> [https://arace.tech/collections/radxa Arace Tech] </h4>
* <h4> [https://shop.allnetchina.cn/ Allnet China] </h4>
* <h4> [https://www.okdo.com/c/rock-shop/ Okdo] </h4>
---------
=== Aisa ===
====Bangladesh====
* <h5> [http://www.techronyx.com/buy.html Techronyx] </h5>
==== China====
* <h5>[https://radxa.taobao.com/ 瑞莎 Taobao]</h5>
* <h5>[https://allnetchina.taobao.com/ 安联新创]</h5>

====India====
* <h5>[https://hubtronics.in/index.php?route=product/search&search=radxa&description=true Hubtronics]</h5>

==== Iran====
* <h5>[http://kavirelectronic.ir/eshop/index.php?id_product=1200216&controller=product Kavir Electronic]</h5>
----------
===Europe===
==== UK ====
* <h5>[http://hackspark.fr/en/radxa-rock-quad-core-single-board-computer-including-case-and-cables.html Hack Spark]</h5>
==== Germany====
* <h5>[http://www.watterott.com/ Watterott Electronic]</h5>
====The Netherlands====
* <h5>[http://embeddedcomputer.nl/radxa-rock-quad-core.html ComputerNL]</h5>
---------
===North America===
====USA====
* <h5>[https://ameridroid.com/collections/all-products/brand_radxa Ameridroid]</h5>

Distributors

2024-01-16T13:06:49Z

Hipboi: /* India */

Currently you can buy the products of radxa from one of the distributors below.

__TOC__

=== Global Shipping ===
---------
* <h4> [https://arace.tech/collections/radxa Arace Tech] </h4>
* <h4> [https://shop.allnetchina.cn/ Allnet China] </h4>
* <h4> [https://www.okdo.com/c/rock-shop/ Okdo] </h4>
---------
=== Aisa ===
====Bangladesh====
* <h5> [http://www.techronyx.com/buy.html Techronyx] </h5>
==== China====
* <h5>[http://item.taobao.com/item.htm?spm=a1z10.1.w4004-5469437845.2.wNI19n&id=36941946247 Espace]</h5>
* <h5>[http://xidikaiyuanshuma.tmall.com/ Seeed Studio]</h5>
====India====
* <h5>[https://hubtronics.in/index.php?route=product/search&search=radxa&description=true Hubtronics]</h5>

==== Iran====
* <h5>[http://kavirelectronic.ir/eshop/index.php?id_product=1200216&controller=product Kavir Electronic]</h5>
----------
===Europe===
==== UK ====
* <h5>[http://hackspark.fr/en/radxa-rock-quad-core-single-board-computer-including-case-and-cables.html Hack Spark]</h5>
==== Germany====
* <h5>[http://www.watterott.com/ Watterott Electronic]</h5>
====The Netherlands====
* <h5>[http://embeddedcomputer.nl/radxa-rock-quad-core.html ComputerNL]</h5>
---------
===North America===
====USA====
* <h5>[https://ameridroid.com/collections/all-products/brand_radxa Ameridroid]</h5>

Distributors

2024-01-16T13:05:17Z

Hipboi:

Currently you can buy the products of radxa from one of the distributors below.

__TOC__

=== Global Shipping ===
---------
* <h4> [https://arace.tech/collections/radxa Arace Tech] </h4>
* <h4> [https://shop.allnetchina.cn/ Allnet China] </h4>
* <h4> [https://www.okdo.com/c/rock-shop/ Okdo] </h4>
---------
=== Aisa ===
====Bangladesh====
* <h5> [http://www.techronyx.com/buy.html Techronyx] </h5>
==== China====
* <h5>[http://item.taobao.com/item.htm?spm=a1z10.1.w4004-5469437845.2.wNI19n&id=36941946247 Espace]</h5>
* <h5>[http://xidikaiyuanshuma.tmall.com/ Seeed Studio]</h5>
====India====
* <h5>[http://www.innovatesolutions.net/products/radxa-rock Innovate Solutions]</h5>
==== Iran====
* <h5>[http://kavirelectronic.ir/eshop/index.php?id_product=1200216&controller=product Kavir Electronic]</h5>
----------
===Europe===
==== UK ====
* <h5>[http://hackspark.fr/en/radxa-rock-quad-core-single-board-computer-including-case-and-cables.html Hack Spark]</h5>
==== Germany====
* <h5>[http://www.watterott.com/ Watterott Electronic]</h5>
====The Netherlands====
* <h5>[http://embeddedcomputer.nl/radxa-rock-quad-core.html ComputerNL]</h5>
---------
===North America===
====USA====
* <h5>[https://ameridroid.com/collections/all-products/brand_radxa Ameridroid]</h5>

Device-tree-overlays

2024-01-08T12:32:13Z

Hipboi:

{{Languages|Device-tree-overlays}}

Note: This wiki page is absolute in 2024, please refer the Radxa Docs for how to use device tree overlays on the latest Radxa OS: https://docs.radxa.com/en/radxa-os/rsetup/devicetree

= Introduction of Radxa Boards Device Tree Overlays =

This document describes Radxa Boards device tree overlays provided in kernel packages.

== Platform and Chips ==

* Rockchip (Rockchip)
** RK3568
** RK3566
** RK3399PRO
** RK3328
** RK3308

*Meson (Amlogic)
** Meson G12A: S905Y2

== Part One: Rockchip ==

Kernel provided DT overlay files are in /boot/dtbs/$(uname -r)/rockchip/overlay/

/boot/uEnv.txt contents:

overlays=rk3399pro-i2c2 rk3399pro-console-on-uart2 rk3399pro-pwm0 rk3399pro-w1-gpio rk3399pro-spi-spidev
param_spidev_spi_bus=1
param_spidev_max_freq=10000000
param_w1_pin=GPIO2_A2

Add names of overlays you want to activate to overlays= line in /boot/uEnv.txt, separated with spaces.

Add required parameters with their values to /boot/uEnv.txt, one per line.

Add optional parameters with their values to /boot/uEnv.txt if you want to change the default value, one per line.

==== U-Boot Environment Variable ====

* verbosity

Kernel log level: 1~7

verbosity=7

* rootfstype

root filesystem type: ext4

rootfstype=ext4

* fdtfile

Kernel device tree name with the prefix, '''rockchip/'''

fdtfile=rockchip/rk3399pro-rockpi-n10-linux.dtb

* extraargs
** Driver module parameters

extraargs=mem=512MB max_loop=8

=== RK3566/RK3568 Available Overlay (ROCK 3A, ROCK 3B, Radxa CM3) ===

<div class="toccolours mw-collapsible mw-collapsed" style="overflow:auto;">

* rk3568-can1-m0 rk3568-can1-m1
* rk3568-i2c2-m0 rk3568-i2c3-m0
* rk3568-pwm1-m0 rk3568-pwm1-m1 rk3568-pwm2-m0 rk3568-pwm2-m1 rk3568-pwm8-m0-fan rk3568-pwm9-m0 rk3568-pwm12-m0 rk3568-pwm12-m1 rk3568-pwm13-m0 rk3568-pwm13-m1 rk3568-pwm14-m0 rk3568-pwm14-m1 k3568-pwm15-m0 rk3568-pwm15-m1
* rk3568-spi3-m1-cs0-spidev
* rk3568-uart0 rk3568-uart3-m0 rk3568-uart3-m1 rk3568-uart5-m1 rk3568-uart7-m1 rk3568-uart8-m1 rk3568-uart9-m1
* rk3568-w1-gpio

===== '''rk3568-can1-m0''' =====

Activates CAN bus 1 M0

CAN1 M0 pins: CAN1_RX_M0, CAN1_TX_M0

Usage: Add the item "rk3568-can1-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-can1-m0

===== '''rk3568-can1-m1''' =====

Activates CAN bus 1 M1

CAN1 M0 pins: CAN1_RX_M1, CAN1_TX_M1

Usage: Add the item "rk3568-can1-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-can1-m1

===== '''rk3568-i2c2-m0''' =====

Activates I2C bus 2 M0

I2C2 M0 pins: I2C2_SDA_M0, I2C2_SCL_M0

Usage: Add the item "rk3568-i2c2-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-i2c2-m0

===== '''rk3568-i2c3-m0''' =====

Activates I2C bus 3 M0

I2C3 M0 pins: I2C3_SDA_M0, I2C3_SCL_M0

Usage: Add the item "rk3568-i2c3-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-i2c3-m0

===== '''rk3568-pwm1-m0''' =====

Activates PWM1_M0

Usage: Add the item "rk3568-pwm1-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm1-m0

===== '''rk3568-pwm1-m1''' =====

Activates PWM1_M1

Usage: Add the item "rk3568-pwm1-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm1-m1

===== '''rk3568-pwm2-m0''' =====

Activates PWM2_M0

Usage: Add the item "rk3568-pwm2-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm2-m0

===== '''rk3568-pwm2-m1''' =====

Activates PWM2_M1

Usage: Add the item "rk3568-pwm2-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm2-m1

===== '''rk3568-pwm8-m0-fan''' =====

Activates PWM8_M0

Usage: Add the item "rk3568-pwm8-m0-fan" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm8-m0-fan

===== '''rk3568-pwm9-m0''' =====

Activates PWM9_M0

Usage: Add the item "rk3568-pwm9-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm9-m0

===== '''rk3568-pwm12-m0''' =====

Activates PWM12_M0

Usage: Add the item "rk3568-pwm12-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm12-m0

===== '''rk3568-pwm12-m1''' =====

Activates PWM12_M1

Usage: Add the item "rk3568-pwm12-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm12-m1

===== '''rk3568-pwm13-m0''' =====

Activates PWM13_M0

Usage: Add the item "rk3568-pwm13-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm13-m0

===== '''rk3568-pwm13-m1''' =====

Activates PWM13_M1

Usage: Add the item "rk3568-pwm13-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm13-m1

===== '''rk3568-pwm14-m0''' =====

Activates PWM14_M0

Usage: Add the item "rk3568-pwm14-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm14-m0

===== '''rk3568-pwm14-m1''' =====

Activates PWM14_M1

Usage: Add the item "rk3568-pwm14-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm14-m1

===== '''rk3568-pwm15-m0''' =====

Activates PWM15_M0

Usage: Add the item "k3568-pwm15-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=k3568-pwm15-m0

===== '''rk3568-pwm15-m1''' =====

Activates PWM15_M1

Usage: Add the item "rk3568-pwm15-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm15-m1

===== '''rk3568-spi3-m1-cs0-spidev''' =====

Activates SPI3 M0 (/dev/spidev3.0)

SPI3 M1 pins: SPI3_CS0_M1, SPI3_CLK_M1, SPI3_MOSI_M1, SPI3_MISO_M1

Usage: Add the item "rk3568-spi3-m1-cs0-spidev" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-spi3-m1-cs0-spidev

===== '''rk3568-uart0''' =====

Activates serial port 0 (/dev/ttyS0)

UART0 pins: UART0_RX, UART0_TX

Usage: Add the item "rk3568-uart0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart0

===== '''rk3568-uart3-m0''' =====

Activates serial port 3 on M0 (/dev/ttyS3)

UART3 M0 pins: UART3_RX_M0, UART3_TX_M0

Usage: Add the item "rk3568-uart3-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart3-m0

===== '''rk3568-uart3-m1''' =====

Activates serial port 3 on M1 (/dev/ttyS3)

UART3 M1 pins: UART3_RX_M1, UART3_TX_M1

Usage: Add the item "rk3568-uart3-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart3-m1

===== '''rk3568-uart5-m1''' =====

Activates serial port 5 on M1 (/dev/ttyS5)

UART5 M1 pins: UART5_RX_M1, UART5_TX_M1

Usage: Add the item "rk3568-uart5-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart5-m1

===== '''rk3568-uart7-m1''' =====

Activates serial port 7 on M1 (/dev/ttyS7)

UART7 M1 pins: UART7_RX_M1, UART7_TX_M1

Usage: Add the item "rk3568-uart7-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart7-m1

===== '''rk3568-uart8-m1''' =====

Activates serial port 8 on M1 (/dev/ttyS8)

UART8 M1 pins: UART8_RX_M1, UART8_TX_M1

Usage: Add the item "rk3568-uart8-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart8-m1

===== '''rk3568-uart9-m1''' =====

Activates serial port 9 on M1 (/dev/ttyS9)

UART9 M1 pins: UART9_RX_M1, UART9_TX_M1

Usage: Add the item "rk3568-uart9-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart9-m1

===== '''rk3568-w1-gpio''' =====

Activates 1-Wire GPIO master

Requires an external pull-up resistor on the data pin

* Parameters:
** param_w1_pin (pin)
*** Data pin for 1-Wire master
*** Optional
*** Default: GPIO3_A5

Usage: Add the item "rk3568-w1-gpio" to "overlays=" line in /boot/uEnv.txt.
Also param_w1_pin is needed.

overlays=rk3568-w1-gpio
param_w1_pin=GPIO3_A5

</div>

=== RK3399PRO Available Overlay (ROCK Pi N10) ===

<div class="toccolours mw-collapsible mw-collapsed" style="overflow:auto;">

* rk3399pro-i2c2, rk3399pro-i2c6, rk3399pro-i2c7
* rk3399pro-spi-spidev
* rk3399pro-pwm0, rk3399pro-pwm1
* rk3399pro-uart2, rk3399pro-uart4
* rk3399pro-console-on-uart2, rk3399pro-console-on-uart4
* rk3399pro-w1-gpio

===== '''rk3399pro-i2c2''' =====

Activates I2C bus 2

I2C2 pins (SCL, SDA): GPIO2_A1, GPIO2_A0

Usage: add one line in /boot/uEnv.txt
overlays=rk3399pro-i2c2

===== '''rk3399pro-i2c6''' =====

Activates I2C bus 6

I2C7 pins (SCL, SDA): GPIO2_B2, GPIO2_A1

===== '''rk3399pro-i2c7''' =====

Activates I2C bus 7

I2C7 pins (SCL, SDA): GPIO2_B0, GPIO2_A7

===== '''rk3399pro-spi-spidev''' =====

Activates spidev device node (/dev/spidevX.Y) for userspace SPI access, where X is the bus number and Y is the CS number

SPI 1 pins (MOSI, MISO, SCK, CS): GPIO1_B0, GPIO1_A7, GPIO1_B1, GPIO1_B2

Parameters:

* param_spidev_spi_bus (int)
** SPI bus to activate SPIdev support on
** Required
** Supported values: 0, 1

* param_spidev_spi_cs (int)
** SPI chip select number
** Optional
** Default: 0
** Supported values: 0, 1
** Using chip select 1 requires using "spi-add-cs1" overlay

* param_spidev_max_freq (int)
** Maximum SPIdev frequency
** Optional
** Default: 10000000
** Range: 3000 - 100000000

===== '''rk3399pro-pwm0''' =====

Activates PWM0

===== '''rk3399pro-pwm1''' =====

Activates PWM1

===== '''rk3399pro-uart2''' =====

Activates serial port 2 (/dev/ttyS2)

UART2 pins (RXD, TXD): GPIO4_C3, GPIO4_C4

Notice: rk3399pro-uart2 and rk3399pro-console-on-uart2 cannnot be added together in /boot/uEnv.txt.

===== '''rk3399pro-uart4''' =====

Activates serial port 4 (/dev/ttyS4)

UART4 pins (RXD, TXD): GPIO1_A7, GPIO1_B0

Notice: UART4 cannot be activated together with SPI1 since they share the same pins. Also, rk3399pro-uart4 and rk3399pro-console-on-uart4 cannnot be added together in /boot/uEnv.txt.

===== '''rk3399pro-console-on-uart2''' =====

Activates debug console on UART2

console pins (RXD, TXD): GPIO4_C3, GPIO4_C4

Notice: rk3399pro-console-on-uart2 and rk3399pro-uart2 cannnot be added together in /boot/uEnv.txt.

===== '''rk3399pro-console-on-uart4''' =====

Activates debug console on UART4

console pins (RXD, TXD): GPIO1_A7, GPIO1_B0

Notice: rk3399pro-console-on-uart4 and rk3399pro-uart4 cannnot be added together in /boot/uEnv.txt.

===== '''rk3399pro-w1-gpio''' =====

Activates 1-Wire GPIO master

Requires an external pull-up resistor on the data pin

Parameters:

* param_w1_pin (pin)
** Data pin for 1-Wire master
** Optional
** Default: GPIO2_A2

===== '''rk3399pro-raspberrypi-7-inch-lcd''' =====

Activates Raspberry Pi 7-inch LCD

Notice: In term of hardware, use a 15-pin FPC cable to connect RPI LCD to ROCK Pi N10.

For power supply, both 5V pin and GND pin on 5-pin connector on RPI LCD are connected to the 40-pin connector on ROCK Pi N10.

===== '''rk3399pro-pcie-gen2''' =====

Activates PCIe Gen2 Mode

</div>

=== RK3328 Available Overlay (ROCK Pi E) ===

<div class="toccolours mw-collapsible mw-collapsed" style="overflow:auto;">

* rk3328-i2c1
* rk3328-spi-spidev
* rk3328-uart1, rk3328-uart2
* rk3328-console-on-uart1, rk3328-console-on-uart2
* rk3328-w1-gpio

===== '''rk3328-i2c1''' =====

Activates I2C bus 2

I2C2 pins (SCL, SDA): GPIO2_A1, GPIO2_A0

Usage: add one line in /boot/uEnv.txt

overlays=rk3328-i2c1

===== '''rk3328-spi-spidev''' =====

Activates spidev device node (/dev/spidevX.Y) for userspace SPI access,
where X is the bus number and Y is the CS number

SPI 0 pins (MOSI, MISO, SCK, CS): GPIO3_A1, GPIO3_A2, GPIO3_A0, GPIO3_B0

Parameters:

* param_spidev_spi_bus (int)
** SPI bus to activate SPIdev support on
** Required
** Supported values: 0

* param_spidev_spi_cs (int)
** SPI chip select number
** Optional
** Default: 0
** Supported values: 0

* param_spidev_max_freq (int)
** Maximum SPIdev frequency
** Optional
** Default: 10000000
** Range: 3000 - 100000000

===== '''rk3328-uart1''' =====

Activates serial port 1 (/dev/ttyS1)

UART1 pins (RXD, TXD): GPIO3_A6, GPIO3_A4

Notice: rk3328-uart1 and rk3328-console-on-uart1 cannnot be added together in /boot/uEnv.txt.

===== '''rk3328-uart2''' =====

Activates serial port 2 (/dev/ttyS2)

UART2 pins (RXD, TXD): GPIO2_A1, GPIO2_A0

Notice: rk3328-uart2 and rk3328-console-on-uart2 cannnot be added together in /boot/uEnv.txt.

===== '''rk3328-console-on-uart''' =====

Activates debug console on UART1

console pins (RXD, TXD): GPIO3_A6, GPIO3_A4

Notice: rk3328-console-on-uart1 and rk3328-uart1 cannnot be added together in /boot/uEnv.txt.

===== '''rk3328-console-on-uart2''' =====

Activates debug console on UART2

console pins (RXD, TXD): GPIO2_A1, GPIO2_A0

Notice: rk3328-console-on-uart2 and rk3328-uart2 cannnot be added together in /boot/uEnv.txt.

===== '''rk3328-w1-gpio''' =====

Activates 1-Wire GPIO master

Requires an external pull-up resistor on the data pin

Parameters:

* param_w1_pin (pin)
** Data pin for 1-Wire master
** Optional
** Default: GPIO2_D2

</div>

=== RK3308 Available Overlay (ROCK Pi S) ===

<div class="toccolours mw-collapsible mw-collapsed" style="overflow:auto;">

* i2c1-hym8563
* rk3308-i2c0, rk3308-i2c1, rk3308-i2c2, rk3308-i2c3
* rk3308-spi-spidev
* rk3308-uart0, rk3308-uart1, rk3308-uart2
* rk3308-pwm1, rk3308-pwm2, rk3308-pwm3
* rk3308-console-on-uart0, rk3308-console-on-uart1, rk3308-console-on-uart2
* rk3308-w1-gpio
* rockpis-v11-spi2-waveshare35b-v2, rockpis-v11-spi2-waveshare35c, rockpis-v12-spi2-waveshare35b-v2, rockpis-v12-spi2-waveshare35c

Notes:.<br />
1.I2C0, UART1 and SPI2 cannot be enabled at the same time.<br />
2.I2C2 and SPI0 cannot be enabled at the same time..<br />
3.I2C3 and PWM2 cannot be enabled at the same time..<br />
4.I2C3 and PWM3 cannot be enabled at the same time..<br />
5.SPI0 and UART0 cannot be enabled at the same time..<br />
6.SPI2 and UART2 cannot be enabled at the same time..<br />
7.Waveshare 3.5 inch LCD related pins on 40-PIN HEADER 1: PIN#11/18/19/21/22/23/24/26

===== '''i2c1-hym8563''' =====

Activates hym8563 RTC

Related pins: I2C1(SCL/SDA), nINT(GPIO0_C1)

===== '''rk3308-i2c0''' =====

Activates I2C bus 0

I2C0 pins (SCL, SDA): GPIO1_D1, GPIO1_D0

===== '''rk3308-i2c1''' =====

Activates I2C bus 1

I2C1 pins (SCL, SDA): GPIO0_B4, GPIO0_B3

===== '''rk3308-i2c2''' =====

Activates I2C bus 2

I2C2 pins (SCL, SDA): GPIO2_A3, GPIO2_A2

===== '''rk3308-i2c3''' =====

Activates I2C bus 3

I2C3 pins (SCL, SDA): GPIO0_C0, GPIO0_B7

===== '''rk3308-spi-spidev''' =====

Activates SPIdev device node (/dev/spidevX.Y) for userspace SPI access,
where X is the bus number and Y is the CS number

SPI 0 pins (MOSI, MISO, SCK, CS): GPIO2_A1, GPIO2_A0, GPIO2_A2, GPIO2_A3
SPI 1 pins (MOSI, MISO, SCK, CS): GPIO3_B4, GPIO3_B2, GPIO3_B3, GPIO3_B5
SPI 2 pins (MOSI, MISO, SCK, CS): GPIO1_C7, GPIO1_C6, GPIO1_D0, GPIO1_D1

Parameters:

* param_spidev_spi_bus (int)
** SPI bus to activate SPIdev support on
** Required
** Supported values: 0

* param_spidev_spi_cs (int)
** SPI chip select number
** Optional
** Default: 0
** Supported values: 0

* param_spidev_max_freq (int)
** Maximum SPIdev frequency
** Optional
** Default: 10000000
** Range: 3000 - 100000000

===== '''rk3308-uart0''' =====

Activates serial port 0 (/dev/ttyS0)

UART0 pins (RXD, TXD): GPIO2_A0, GPIO2_A1

===== '''rk3308-uart1''' =====

Activates serial port 1 (/dev/ttyS1)

UART1 pins (RXD, TXD): GPIO1_D0, GPIO1_D1

===== '''rk3308-uart2''' =====

Activates serial port 2 (/dev/ttyS2)

UART2 pins (RXD, TXD): GPIO1_C6, GPIO1_C7

===== '''rk3308-pwm1''' =====

Activates PWM1

===== '''rk3308-pwm2''' =====

Activates PWM2

===== '''rk3308-pwm3''' =====

Activates PWM3

===== '''rk3308-console-on-uart0''' =====

Activates debug console on UART0

console pins (RXD, TXD): GPIO2_A0, GPIO2_A1

Notes:<br />
1.rk3308-console-on-uart0 and rk3308-uart0 cannnot be added together in /boot/uEnv.txt.

===== '''rk3308-console-on-uart1''' =====

Activates debug console on UART1

console pins (RXD, TXD): GPIO1_D0, GPIO1_D1

Notes:<br />
1.rk3308-console-on-uart1 and rk3308-uart1 cannnot be added together in /boot/uEnv.txt.

===== '''rk3308-console-on-uart2''' =====

Activates debug console on UART2

console pins (RXD, TXD): GPIO1_C6, GPIO1_C7

Notes:<br />
1.rk3308-console-on-uart2 and rk3308-uart2 cannnot be added together in /boot/uEnv.txt.

===== '''rk3308-w1-gpio''' =====

Activates 1-Wire GPIO master

Requires an external pull-up resistor on the data pin

Parameters:

* param_w1_pin (pin)
** Data pin for 1-Wire master
** Optional
** Default: GPIO0_C1

===== '''rockpis-v11-spi2-waveshare35b-v2''' =====

Activates waveshare 3.5inch lcd(B v2) on ROCK Pi S V1.1

===== '''rockpis-v11-spi2-waveshare35c''' =====

Activates waveshare 3.5inch lcd(C) on ROCK Pi S V1.1

===== '''rockpis-v12spi2-waveshare35b-v2''' =====

Activates waveshare 3.5inch lcd(B v2) on ROCK Pi S V1.2

===== '''rockpis-v12-spi2-waveshare35c''' =====

Activates waveshare 3.5inch lcd(C) on ROCK Pi S V1.2

</div>

== Part Two: Meson ==

Kernel provided DT overlay files are in /boot/dtbs/$(uname -r)/amlogic/overlay/

/boot/uEnv.txt contents:

overlays=meson-g12a-i2c-ao-m0-gpioao-2-gpioao-3 meson-g12a-i2c-ee-m1-gpioh-6-gpioh-7 meson-g12a-i2c-ee-m3-gpioa-14-gpioa-15 meson-g12a-spi-spidev
param_spidev_spi_bus=0
param_spidev_max_freq=10000000

Add names of overlays you want to activate to overlays= line in /boot/uEnv.txt, separated with spaces.

Add required parameters with their values to /boot/uEnv.txt, one per line.

Add optional parameters with their values to /boot/uEnv.txt if you want to change the default value, one per line.

==== U-Boot Environment Variable ====

* verbosity

Kernel log level: 1~7

verbosity=7

* rootfstype

root filesystem type: ext4

rootfstype=ext4

* fdtfile

Kernel device tree name with the prefix, '''amlogic/'''

fdtfile=amlogic/meson-g12a-radxa-zero.dtb

* extraargs
** Driver module parameters

extraargs=mem=512MB max_loop=8

=== Meson G12A Available Overlay (Radxa Zero) ===

<div class="toccolours mw-collapsible mw-collapsed" style="overflow:auto;">

* meson-g12a-i2c-ao-m0-gpioao-2-gpioao-3 meson-g12a-i2c-ee-m1-gpioh-6-gpioh-7 meson-g12a-i2c-ee-m1-gpiox-10-gpiox-11 meson-g12a-i2c-ee-m3-gpioa-14-gpioa-15
* meson-g12a-pwmao-a-on-gpioao-11 meson-g12a-pwm-c-on-gpiox-8
* meson-g12a-spi-spidev
* meson-g12a-uart-ao-a-on-gpioao-0-gpioao-1 meson-g12a-uart-ao-b-on-gpioao-2-gpioao-3 meson-g12a-uart-ao-b-on-gpioao-8-gpioao-9 meson-g12a-uart-ee-c

===== '''meson-g12a-i2c-ee-m1-gpioh-6-gpioh-7''' =====

Activates I2C EE M1

Device name: /dev/i2c-1

Pins (SCL, SDA): GPIOH_7, GPIOH_6

Usage: add item "meson-g12a-i2c-ee-m1-gpioh-6-gpioh-7" to "overlays=" line in /boot/uEnv.txt

overlays=meson-g12a-i2c-ee-m1-gpioh-6-gpioh-7

===== '''meson-g12a-i2c-ee-m1-gpiox-10-gpiox-11''' =====

Activates I2C EE M1

Device name: /dev/i2c-1

Pins (SCL, SDA): GPIOX_11, GPIOX_10

Usage: add item "meson-g12a-i2c-ee-m1-gpiox-10-gpiox-11" to "overlays=" line in /boot/uEnv.txt

overlays=meson-g12a-i2c-ee-m1-gpiox-10-gpiox-11

===== '''meson-g12a-i2c-ee-m3-gpioa-14-gpioa-15''' =====

Activates I2C EE M3

Device name: /dev/i2c-3

Pins (SCL, SDA): GPIOA_15, GPIOA_14

Usage: add item "meson-g12a-i2c-ee-m3-gpioa-14-gpioa-15" to "overlays=" line in /boot/uEnv.txt

overlays=meson-g12a-i2c-ee-m3-gpioa-14-gpioa-15

===== '''meson-g12a-i2c-ao-m0-gpioao-2-gpioao-3''' =====

Activates I2C AO M0

Device name: /dev/i2c-4

Pins (SCL, SDA): GPIOAO_2, GPIOAO_3

Usage: add item "meson-g12a-i2c-ao-m0-gpioao-2-gpioao-3" to "overlays=" line in /boot/uEnv.txt

overlays=meson-g12a-i2c-ao-m0-gpioao-2-gpioao-3

===== '''meson-g12a-uart-ao-a-on-gpioao-0-gpioao-1''' =====

Activates UART AO A (/dev/ttyAML0)

pins (RX, TX): GPIOAO_1, GPIOAO_0

Usage: add item "meson-g12a-uart-ao-a-on-gpioao-0-gpioao-1" to "overlays=" line in /boot/uEnv.txt

overlays=meson-g12a-uart-ao-a-on-gpioao-0-gpioao-1

This dtbo meson-g12a-uart-ao-a-on-gpioao-0-gpioao-1 enables us to use /dev/ttyAML0 as serial console or common serial communication.

For usage of serial console, add the following "console=" line and add item "meson-g12a-uart-ao-a-on-gpioao-0-gpioao-1" to "overlays=" to line in /boot/uEnv.txt

console=ttyAML0,115200
overlays=meson-g12a-uart-ao-a-on-gpioao-0-gpioao-1

For usage of common serial communication, only add the item "meson-g12a-uart-ao-a-on-gpioao-0-gpioao-1" to "overlays=" line in /boot/uEnv.txt

overlays=meson-g12a-uart-ao-a-on-gpioao-0-gpioao-1

===== '''meson-g12a-uart-ao-b-on-gpioao-2-gpioao-3''' =====

Activates UART AO B (/dev/ttyAML1)

pins (RX, TX): GPIOAO_3, GPIOAO_2

Usage: add item "meson-g12a-uart-ao-b-on-gpioao-2-gpioao-3" to "overlays=" line in /boot/uEnv.txt

overlays=meson-g12a-uart-ao-b-on-gpioao-2-gpioao-3

===== '''meson-g12a-uart-ao-b-on-gpioao-8-gpioao-9''' =====

Activates UART AO B (/dev/ttyAML1)

pins (RX, TX): GPIOAO_9, GPIOAO_8

Usage: add item "meson-g12a-uart-ao-b-on-gpioao-8-gpioao-9" to "overlays=" line in /boot/uEnv.txt

overlays=meson-g12a-uart-ao-b-on-gpioao-8-gpioao-9

===== '''meson-g12a-uart-ee-c''' =====

Activates UART EE C (/dev/ttyAML4)

pins (RX, TX, RTS, CTS): GPIOH_6, GPIOH_7, GPIOH_4, GPIOH_5

Usage: add item "meson-g12a-uart-ee-c" to "overlays=" line in /boot/uEnv.txt

overlays=meson-g12a-uart-ee-c

===== '''meson-g12a-pwm-c-on-gpiox-8''' =====

Activates PWM_C

Pins: GPIOX_8

===== '''meson-g12a-pwmao-a-on-gpioao-11''' =====

Activates PWMAO_A

Pins: GPIOAO_11

===== '''meson-g12a-spi-spidev''' =====

Activates SPIdev device node (/dev/spidevX.Y) for userspace SPI access,
where X is the bus number and Y is the CS number

* SPI A bus
**pins (SS0, SCLK, MOSI, MISO): GPIOX_10, GPIOX_11, GPIOX_8, GPIOX_9
**device: /dev/spidev0.0
* SPI B bus
** pins (SS0, SCLK, MOSI, MISO): GPIOH_6, GPIOH_7, GPIOH_4, GPIOH_5
** device: /dev/spidev1.0
* Parameters:
** param_spidev_spi_bus (int)
*** SPI bus to activate SPIdev support on
*** Required
*** Supported values: 0, 1
** param_spidev_spi_cs (int)
*** SPI chip select number
*** Optional
*** Default: 0
*** Supported values: 0
** param_spidev_max_freq (int)
*** Maximum SPIdev frequency
*** Optional
*** Default: 10000000
*** Range: 3000 - 100000000

</div>

Rockpi4/hardware/models

2023-12-30T13:09:50Z

Hipboi:

{{rockpi4_header}}
{{Languages|rockpi4/hardware/models}}

[[rockpi4 | ROCK Pi 4]] > [[rockpi4/hardware | Hardware]] > [[rockpi4/hardware/models | Models and SKU]]

__NOTOC__

== Models Comparison Table ==

{| class="wikitable"
|-
! style="width: 5%; text-align:center;" |
! style="width: 10%; text-align:center;" | ROCK (Pi) 4A(2018)
! style="width: 10%; text-align:center;" | ROCK (Pi) 4B(2018)
! style="width: 10%; text-align:center;" | ROCK (Pi) 4C(2020)
! style="width: 10%; text-align:center;" | ROCK 4A+(2021)
! style="width: 10%; text-align:center;" | ROCK 4B+(2021)
! style="width: 10%; text-align:center;" | ROCK 4 SE(2022)
! style="width: 10%; text-align:center;" | ROCK 4C+(2022)
|-
| CPU
| colspan="3" | RK3399(1.8Ghz, overclock 2.0Ghz)
| colspan="2" | OP1(2.0Ghz, overclock 2.2/2.4Ghz)
| colspan="2" | RK3399-T(1.5Ghz, overclock 1.8Ghz)
|-
| eMMC
| colspan="3" | eMMC module connector, users can buy 16/32/64/128GB eMMC modules additionally
| colspan="2" | eMMC none-removable, choose the size when order the ROCK (Pi) 4
| colspan="2" | eMMC module connector, users can buy 16/32/64/128GB eMMC modules additionally
|-
| SPI Flash
| colspan="3" | 4MB
| colspan="4" | N/A
|-
| Power
| colspan="6" | 6V - 12V PD/QC power supply recommended. 5V only power input may be unstable under high load.
| 5V/3A
|-
| M.2
| colspan="6" | 1x M.2 M Key for NVMe SSD with 4-lanes PCIe 2.1
| N/A
|-
| WiFi/BT
| N/A
| colspan="2" | WiFi5/BT5(AP6256 module), on board antenna or external antenna
| N/A
| WiFi5/BT5(AP6256 module), on board antenna or external antenna
| WiFi5/BT5(AW-CM256 module), on board antenna(external antenna upon request)
| WiFi5/BT5(AW-CM256 module), external antenna only
|-
| Audio Codec
| colspan="6" | ES8316
| RK817
|-
| Monitor
| colspan="2" | one full size HDMI(4kp60)
| one micro size HDMI(4kp60), one mini DP(2kp60)
| colspan="3" | one full size HDMI(4kp60)
| two micro HDMI(4kp60 + 2kp60)
|-
| DSI
| colspan="6" | 2-lanes MIPI DSI(15P 1mm connector, support resolution 800*480, up to 800*1280)
| 4-lanes MIPI DSI(39P 0.3mm connector, resolution up to 1920*1200)
|}

== SKU Code ==

<div class="toccolours mw-collapsible mw-collapsed" style="overflow:auto;">

=== ROCK Pi 4 ===
{| class="wikitable"
|- style="font-weight:bold; text-align:center;"
! SKU
! RAM
! PD/QC
! WiFi/BT
! Antenna
! style="text-align:left;" | HW REV
! Note
|- style="background-color:#FFF;"
| RS114A-V146-R1D4E0W0S4T2
| 4GB
| HT188+LDR6015
| -
| -
| v1.46
| EoL
|-
| RS114B-V146-R1D4E0W1S4T0
| 4GB
| HT188+LDR6015
| AP6256
| On board
| v1.46
| EoL
|-
| RS114C-V110-R1D4E0W1S4T0
| 4GB
| HT188+LDR6015
| AP6256
| On board
| v1.1
|
|- style="background-color:#FFF;"
| RS114A-V150-R1D4E0W0S4T2
| 4GB
| IP2315
| -
| -
| v1.50
|
|-
| RS114B-V150-R1D4E0W1S4T0
| 4GB
| IP2315
| AP6256
| On board
| v1.50
|
|}

=== ROCK Pi 4+ ===
{| class="wikitable"
|-
! SKU
! RAM
! eMMC
! PD/QC
! WiFi/BT
! Antenna
! HW REV
! Note
|-
| RS114A-V160-R3D4E32W0S0T2
| 4GB
| 32GB
| HT188+LDR6015
| -
| -
| v1.6
| EoL
|-
| RS114A-V172-R3D2E16W0S0T2
| 2GB
| 16GB
| CH224D
| -
| -
| rowspan="4" | v1.72
|
|-
| RS114A-V172-R3D4E32W0S0T2
| rowspan="3" | 4GB
| 32GB
| CH224D
| -
| -
|
|-
| RS114A-V172-R3D4E64W0S0T2
| 64GB
| CH224D
| -
| -
|
|-
| RS114A-V172-R3D4E128W0S0T2
| 128GB
| CH224D
| -
| -
|
|-
| RS114B-V160-R3D4E32W1S0T0
| 4GB
| 32GB
| HT188+LDR6015
| AP6256
| On board
| v1.6
| EoL
|-
| RS114B-V172-R3D2E16W1S0T0
| 2GB
| 16GB
| CH224D
| AP6256
| On board
| rowspan="7" | v1.72
|
|-
| RS114B-V172-R3D4E32W1S0T0
| rowspan="3" | 4GB
| 32GB
| CH224D
| AP6256
| On board
|
|-
| RS114B-V172-R3D4E64W1S0T0
| 64GB
| CH224D
| AP6256
| On board
|
|-
| RS114B-V172-R3D4E128W1S0T0
| 128GB
| CH224D
| AP6256
| On board
|
|-
| RS114B-V172-R3D4E32W1S0T1
| rowspan="3" | 4GB
| 32GB
| CH224D
| AP6256
| u.FL connector
|
|-
| RS114B-V172-R3D4E64W1S0T1
| 64GB
| CH224D
| AP6256
| u.FL connector
|
|-
| RS114B-V172-R3D4E128W1S0T1
| 128GB
| CH224D
| AP6256
| u.FL connector
|
|-
| RS114C-V120-R2D4E0W2S0T1
| 4GB
| -
| CH224D
| AW-CM256SM
| u.FL connector
| v1.2
|
|}

=== SKU Code Explanation ===

{| class="wikitable"
|-
! colspan="4" | SKU Code Explanation
|-
| V
| BOM/PCB Version
| V175
| 3 digits, hardware version v1.75
|-
| rowspan="3" | R
| rowspan="3" | SOC/CPU
| R1
| RK3399
|-
| R2
| RK3399-T
|-
| R3
| OP1
|-
| D
| DRAM
| D4
| 4GByte ram
|-
| rowspan="4" | E
| rowspan="4" | EMMC
| E0
| no eMMC, eMMC socket(4A/4B/4C+)
|-
| E32
| 32GByte ram(4A+/4B+)
|-
| E64
| 64GByte ram(4A+/4B+)
|-
| E128
| 128GByte ram(4A+/4B+)
|-
| rowspan="3" | W
| rowspan="3" | WiFi Model
| W0
| without WiFi(4A/4A+)
|-
| W1
| AP6256
|-
| W2
| AW-CM256SM
|-
| rowspan="2" | S
| rowspan="2" | SPI Flash
| S0
| DNP SPI Flash
|-
| S4
| 4MByte SPI Flash
|-
| rowspan="3" | T
| rowspan="3" | external antenna
| T0
| on board antenna
|-
| T1
| u.FL connector
|-
| T2
| no antenna
|}
</div>

Rock5/5B

2023-12-12T02:40:07Z

Hipboi:

{{rock5_header}}

{{Languages|rock5/5B}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-8 ">

= ROCK 5 Model B=
This is the documentation for ROCK 5 Model B, written by Radxa Team with community contributions.

ROCK5 is a series of Rockchip RK3588(s) based SBC(Single Board Computer) by [[Special:SpecialContact/| Radxa]]. It can run Linux, Android, BSD and other distributions.

ROCK5 comes in two models, Model A and Model B. Both models offer 4GB, 8GB, 16GB and '''32GB''' options. For detailed difference between Model A and Model B, please check [[Rock5/getting_started#get_start_specs | Specifications]].

ROCK5 features a Octa core ARM processor(4x Cortex-A76 + 4x Cortex-A55), 64bit 3200Mb/s LPDDR4, up to 8K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, 2.5 GbE LAN, PCIe 3.0, PCIe 2.0, 40-pin color expansion header, RTC. Also, ROCK5 supports USB PD and QC powering.

</div> 

<div class="col-md-4 ">

<div class="thumbnail ">[[File:Start_5b.png | 440px | link=rock5/5b]]</div>

<div class="panel panel-hearts-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [[rock5/getting_started | Setup/Quick start ]]</h3> </div>
<div class="panel-body">
* [[rock5/5b/getting_started | Getting started with ROCK 5B]], including what you need and how to get it booted.
</div>
</div> 

<div class="panel panel-mango-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">
{{Community_updates}}
</div>
</div> 

<div class="panel panel-cocktail-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-users"></i> Community</h3></div>
<div class="panel-body">
* Forum: http://forum.radxa.com
* Discord: https://rock.sh/go
* QQ Group: 591048098
* [[Rockpi4/contribute | How to contribute to this wiki, refer ROCK Pi 4 contribution page]]
* Wechat Group:[[File:We5b.jpg | 120px]]
</div>
</div> 

</div> 

</div>

Rock5/5a

2023-12-12T02:39:07Z

Hipboi: /* ROCK 5 Model A */

{{rock5_header}}

{{Languages|rock5/5a}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-8 ">

= ROCK 5 Model A =
This is the documentation for ROCK 5 Model A, written by Radxa Team with community contributions.

ROCK5 is a series of Rockchip RK3588(s) based SBC(Single Board Computer) by [[Special:SpecialContact/| Radxa]]. It can run Linux, Android, BSD and other distributions.

ROCK5 comes in two models, Model A and Model B. Both models offer 4GB, 8GB, 16GB and '''32GB''' options. For detailed difference between Model A and Model B, please check [[Rock5/getting_started#get_start_specs | Specifications]].

ROCK5 features a Octa core ARM processor(4x Cortex-A76 + 4x Cortex-A55), 64bit 3200Mb/s LPDDR4, up to 8K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, 2.5 GbE LAN, PCIe 3.0, PCIe 2.0, 40-pin color expansion header, RTC. Also, ROCK5 supports USB PD and QC powering.

</div> 

<div class="col-md-4 ">

<div class="thumbnail ">[[File:Start_5a.png | 440px | link=rock5/5a]]</div>

<div class="panel panel-hearts-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> [[rock5/getting_started | Setup/Quick start ]]</h3> </div>
<div class="panel-body">
* [[rock5/5a/getting_started | Getting started with ROCK 5A]], including what you need and how to get it booted.
</div>
</div> 

<div class="panel panel-mango-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">
{{Community_updates}}
</div>
</div> 

<div class="panel panel-cocktail-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-users"></i> Community</h3></div>
<div class="panel-body">
* Forum: http://forum.radxa.com
* Discord: https://rock.sh/go
* QQ Group: 591048098
* [[Rockpi4/contribute | How to contribute to this wiki, refer ROCK Pi 4 contribution page]]
* Wechat Group:[[File:We5b.jpg | 120px]]
</div>
</div> 

</div> 

</div>

Zero2

2023-12-11T11:17:22Z

Hipboi: /* Radxa Zero 2 */

{{Zero2_header}}
{{Languages|Zero2}}

__NOTOC__

<div class="col-md-12 ">
<div class="col-md-8 ">
= Radxa Zero 2 Pro=

[[File:Zero2-vector.png|800px]]

This is the Wiki page for Radxa Zero 2 Pro, written by Radxa Team with community contributions.

Radxa Zero 2 Pro is a low profile single board computer with a small form factor. Powered by Amlogic A311D SoC, it can run Android and selected Linux distributions.

Radxa Zero 2 Pro features a hexa-core 64-bit ARM processor, 4GB 32bit LPDDR4 memory, HDMI output up to 4K60p, onboard Wi-Fi and BT connectivity, USB 3.0, and 40-pin GPIO header. Additionally, the power port can also be used as a USB 2.0 OTG port to connect more peripheral.

Radxa Zero 2 Pro comes with various configurations to suit your need. Please check our [[Zero2/Hardware/SKU | available models]] for detail.

</div> 

<div class="col-md-4 ">
<div class="panel panel-mango-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-star"></i> [[community_updates | What's new]]</h3> </div>
<div class="panel-body">

{{Community_updates}}

</div> 
</div> 
</div> 

</div> 

<div class="col-md-12 ">

<div class="col-md-4">
<div class="panel panel-hearts-white">
<div class="panel-heading"> <h3 class="panel-title"><i class="fa fa-hand-o-up"></i> Getting started</h3> </div>
<div class="panel-body">

* [[Zero2/Getting_started | Our beginner guide for Radxa Zero 2 Pro]]. You will learn the basic of the board and how to get it running.

</div>
</div>
</div> 

<div class="col-md-4 ">
<div class="panel panel-midnight-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-download"></i> Installation</h3></div>
<div class="panel-body">

Running as a desktop or hooking up to a TV? Install a different system to suit your need.

* [[Zero/install/eMMC_erase | Erase onboard eMMC]]
* [[Zero/install/eMMC | Install Linux to onboard eMMC]]
* [[Zero2/Install/Linux_microSD| Install Linux to microSD card]]
* [[Zero2/Install/Android_eMMC | Install Android to onboard eMMC]]
* [[Zero2/Install/Downloads | Download images]]

</div> 
</div> 
</div> 

<div class="col-md-4">
<div class="panel panel-mango-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-cog"></i> [[Zero2/Dev | Development]]</h3></div>
<div class="panel-body">

Found a bug in the software? Help us to improve!

* [https://github.com/radxa/debos-radxa debos-radxa] Build Radxa official system images
* [[Zero/dev/kernel | Build Linux kernel]]
* [[Zero/dev/u-boot | Build U-Boot]]
* [[Zero/dev/serial-console | Attach to serial console]]
* [[Zero/dev/maskrom | Enter maskrom mode]]

</div>
</div>
</div> 

</div> 

<div class="col-md-12 ">
<div class="col-md-4 ">
<div class="panel panel-cello-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-hdd-o"></i> [[Zero2/Hardware | Hardware]]</h3></div>
<div class="panel-body">

Technical specifications about Radxa Zero 2 Pro's hardware, including components datasheet, schematic, etc.

* [[Zero2/Hardware/Product | Main board]] - Hardware introduction of the Radxa Zero 2 Pro
* [[Zero2/Hardware/SKU | Available SKU]]
* [[Zero2/Hardware/GPIO | GPIO]]
* [[Zero2/Hardware/Revisions | Hardware revisions]]

</div> 
</div> 
</div> 

<div class="col-md-4 ">
<div class="panel panel-gunmetal-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-linux"></i>Linux User Guide</h3></div>
<div class="panel-body">

Covers the common use cases when using Radxa Zero 2 Pro with a Linux distribution.

* Check out our [[Zero2/Linux/Cheat_sheet | Linux user cheat sheet]] for some common daily tasks
* [[Zero2/Linux/Radxa_APT | Radxa APT repository]]
* [[Zero2/Linux/libmraa | Install Libmraa]] to enable GPIO access and more
* [[Zero2/Linux/adb | Enable adb service]]
* [[Zero2/Linux/usbnet | Enable USB Ethernet gadget]]
* [[Zero2/Linux/usb-mass-storage | Enable USB Mass Storage gadget]]

</div> 
</div> 
</div> 

<div class="col-md-4 ">
<div class="panel panel-cocktail-white">
<div class="panel-heading"><h3 class="panel-title"><i class="fa fa-users"></i> Community</h3></div>
<div class="panel-body">
* Forum: https://forum.radxa.com/
* Discord: https://rock.sh/go
</div>
</div>
</div>

</div>

Zero2/Hardware/compare

2023-12-11T11:15:15Z

Hipboi:

{{Zero_header}}

{{Languages|Zero2/hardware/compare}}

[[Zero2 | Radxa Zero 2 Pro]] > [[Zero2/Hardware | Hardware]] > [[Zero2/Hardware/compare | Zero2 Pro vs Zero]]

{| class="wikitable"
! Model
! colspan="1" width=30% | Radxa Zero 512MB/1GB
! colspan="1" width=20% | Radxa Zero 2GB/4GB
! colspan="1" width=50% | Radxa Zero2 Pro 4GB

|-
! Processor
| colspan="2" | 64bits quad core processor<br />Amlogic S905Y2<br />Quad Cortex-A53@1.8GHz<br />ARM G31 MP2 GPU, supporting OpenGL ES 3.2, Vulkan 1.0, and OpenCL 2.0.
| colspan="1" | 64bits hexa core processor<br />Amlogic A311D<br />Quad Cortex-A73@'''2.2GHz''' and Dual Cortex-A53@'''1.8GHz'''<br />ARM '''G52 MP4''' GPU, supporting OpenGL ES 3.2, Vulkan 1.0, and OpenCL 2.0.<br /> Neural Network Accelerator up to '''5Tops''' computing power
|-
! Memory
| colspan="3" | LPDDR4<br />32bit LPDDR4@3200Mb/s
|-
! Storage
| colspan="1" | microSD card (microSD slot supports up to 128 GB microSD card)
| colspan="2" | on board 8GB eMMC(2GB ram model) or 16GB/32GB/64GB/128GB eMMC(4GB ram model) <br />microSD card (microSD slot supports up to 128 GB microSD card)
|-
! Display
| colspan="2" | HDMI 2.0 up to 4K@60<br />
| colspan="1" | HDMI 2.0 up to 4K@60<br />MIPI DSI 4-lanes up to 1080p@60
|-
! Camera
| colspan="2" | None
| colspan="1" | MIPI CSI 4-lanes, support two 2-lanes cameras
|-
! Wireless
| colspan="1" | 802.11 a/b/g/n (WiFi 4)<br />BT 4.0<br />with on board antenna (optional external antenna)
| colspan="3" | 802.11 ac (WiFi 5)<br />BT 5.0<br />with on board antenna (optional external antenna)
|-
! USB
| colspan="3" | 1 x USB 2.0 Type-C OTG & Power combo port<br />1 x USB 3.0 Type-C HOST
|-
! IO
| colspan="3" | 40-pin expansion header<br />2 x UART<br />2 x SPI bus<br />3 x I2C bus<br />1 x PCM/I2S<br />1 x SPDIF<br />2 x PWM<br />1 x ADC<br />6 x GPIO<br />2 x 5V DC power in<br />2 x 3.3V DC power in
|-
! Others
| colspan="2" | One button for force USB boot or firmware upgrading
| colspan="1" | One button for force USB boot or firmware upgrading, One button for reset
|-
! Power
| colspan="2" | USB-C, 5V/1A
| colspan="1" | USB-C, 5V/3A without LCD, 5V/4A with LCD
|-
! Size
| colspan="2" | 66mm x 30.5mm
| colspan="1" | 66mm x 36mm
|}

Rock3/CM/CM3S

2023-12-06T11:28:46Z

Hipboi: /* Resources */

{{rock3_header}}
{{Languages|rock3/CM/CM3s}}

__NOTOC__

== Radxa CM3S ==

Radxa CM3S is an SoM(System on Module) by Radxa based on Rockchip RK3566 SoC in a small form factor at 32mm x 67.6mm size, integrating CPU/PMU/DRAM/STORAGE/Wireless. Radxa CM3S offers out of box cost-effective solution for multiple purpose applications, accelerates customer's product development. Radxa CM3 and CM3S share most of the design but layout in different form factor, the software can just work on CM3 and CM3S without modifications.

== Resources ==

* [[Rock3/CM/CM3S/models | Order Info(Models & SKU)]]
* [[Rock3/CM/CM3S/pinout | CM3S Pinout]]
* [https://dl.radxa.com/cm3s/docs/hw/radxa_cm3s_product_brief_Revision_1.7.pdf Radxa CM3S Product Brief v1.7]
* Compliance
** [https://dl.radxa.com/cm3/docs/compliance/radxa_cm3_ce_red_report.zip CE RED]
** FCCID: [https://fccid.io/2A3PA-RADXA-CM3 2A3PA-RADXA-CM3]

* Design files of CM3S
** [https://dl.radxa.com/ v1.2 schematic pdf] - Download Schematic of CM3S
** [https://dl.radxa.com/ v1.2 SMD pdf] - Download components Position Reference of CM3S
* [[Rock3/CM/CM3S/models | Order Info(Models & SKU)]] - Different variant of each models

== Devices ==

=== Carrier Boards from third party ===

The following carrier boards are tested and compatible with the Radxa CM3S.

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Waveshare_compute_module_poe_board.jpg | x100px ]]
| [[Rock3/CM/CM3S/wavesharecmpoeboard | Waveshare Compute Module PoE Board]]
| [https://www.waveshare.com/wiki/Compute_Module_PoE_Board Waveshare Wiki]
|}

Rock3/CM/CM3I

2023-12-06T11:06:58Z

Hipboi: /* Resources */

{{rock3_header}}
{{Languages|rock3/CM/CM3I}}

__NOTOC__

== Radxa CM3I ==

Radxa CM3'''I''' is an SoM(System on Module) by Radxa based on Rockchip RK3568/RK3568J SoC in a small form factor at 40mm x 70mm size, integrating CPU/PMU/DRAM/STORAGE/Wireless. Radxa CM3I offers out of box cost-effective solution for multiple purpose applications, accelerates customer's product development. Radxa CM3 and CM3I share some of the design and are partially compatible. CM3I provides industrial environment option with operation temperature from -40° to 85° Celsius degree.

== Resources ==

* [[Rock3/CM/CM3I/models | Order Info(Models & SKU)]]
* [https://dl.radxa.com/cm3i/docs/hw/radxa_cm3i_v1310_pinout.xlsx CM3I Pinout]
* [https://dl.radxa.com/cm3i/docs/hw/radxa_cm3i_product_brief_Revision_1.1.pdf Radxa CM3I Product Brief v1.1]
* Compliance
** [https://dl.radxa.com/cm3/docs/compliance/radxa_cm3_ce_red_report.zip CE RED]
** FCCID: [https://fccid.io/2A3PA-RADXA-CM3 2A3PA-RADXA-CM3]

* Design files of CM3I
** [https://dl.radxa.com/cm3i/docs/hw/radxa_cm3i_v1310_schematic.pdf v1.31 schematic pdf] - Download Schematic of CM3I
** [https://dl.radxa.com/cm3i/docs/hw/radxa_cm3i_v1310_components_placement_map.pdf v1.31 SMD pdf] - Download components Position Reference of CM3I

== Devices ==

=== Carrier Boards from Radxa ===

The following carrier boards are tested and compatible with the Radxa CM3I.

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Radxa_e25.png | x100px ]]
| [[Rock3/CM/CM3I/E25| Dual 2.5G ethernet board]]
| [[Rock3/CM/CM3I/E25/getting_started | Getting started]]
|}

Rock3/CM/CM3I

2023-12-06T10:46:26Z

Hipboi: /* Resources */

{{rock3_header}}
{{Languages|rock3/CM/CM3I}}

__NOTOC__

== Radxa CM3I ==

Radxa CM3'''I''' is an SoM(System on Module) by Radxa based on Rockchip RK3568/RK3568J SoC in a small form factor at 40mm x 70mm size, integrating CPU/PMU/DRAM/STORAGE/Wireless. Radxa CM3I offers out of box cost-effective solution for multiple purpose applications, accelerates customer's product development. Radxa CM3 and CM3I share some of the design and are partially compatible. CM3I provides industrial environment option with operation temperature from -40° to 85° Celsius degree.

== Resources ==

* [[Rock3/CM/CM3I/models | Order Info(Models & SKU)]]
* [[Rock3/CM/CM3I/pinout | CM3I Pinout]]
* [https://dl.radxa.com/cm3i/docs/hw/radxa_cm3i_product_brief_Revision_1.1.pdf Radxa CM3I Product Brief v1.1]
* Compliance
** [https://dl.radxa.com/cm3/docs/compliance/radxa_cm3_ce_red_report.zip CE RED]
** FCCID: [https://fccid.io/2A3PA-RADXA-CM3 2A3PA-RADXA-CM3]

* Design files of CM3I
** [https://dl.radxa.com/ v1.2 schematic pdf] - Download Schematic of CM3I
** [https://dl.radxa.com/ v1.2 SMD pdf] - Download components Position Reference of CM3I
* [[rock3/CM/CM3s/revision | Hardware Revision]] - Difference between each hardware revisions
* [[Rock3/CM/CM3s/models | Models and SKUs]] - Different variant of each models

== Devices ==

=== Carrier Boards from Radxa ===

The following carrier boards are tested and compatible with the Radxa CM3I.

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Radxa_e25.png | x100px ]]
| [[Rock3/CM/CM3I/E25| Dual 2.5G ethernet board]]
| [[Rock3/CM/CM3I/E25/getting_started | Getting started]]
|}

Rock3/CM/CM3

2023-12-06T10:45:24Z

Hipboi: /* Radxa CM3 */

{{rock3_header}}
{{Languages|rock3/CM/CM3}}

__NOTOC__

== Radxa CM3 ==

Radxa CM3 is an SoM(System on Module) by Radxa based on Rockchip RK3566 SoC in a small form factor at 55mm x 40mm size, integrating CPU/PMU/DRAM/STORAGE/Wireless. Radxa CM3 offers out of box cost-effective solution for multiple purpose applications, accelerates customer's product development.

=== Block Diagram ===

[[File:Cm3-block-diagram.jpg | 800px]]

=== Components Overview ===

{| class="wikitable"
|-
! No.
! Description
! No.
! Description
|-
| ①
| SPI Flash disable button
| ⑧
| RK817-5 PMIC
|-
| ②
| SPI Flash
| ⑨
| RTL8211F ethernet phy
|-
| ③
| eMMC disable button
| ⑩
| eMMC chip
|-
| ④
| WiFi/BT module
| ⑪
| B2B connector 2 (J68)
|-
| ⑤
| WiFi/BT antenna
| ⑫
| B2B connector 3 (J1)
|-
| ⑥
| LPDDR4 dram chip
| ⑬
| B2B connector 1 (J69)
|-
| ⑦
| RK3566 SoC
|
|
|}

[[File:Cm3-mark.jpeg | 800px]]

=== Pinout ===

Refer [[rock3/CM/CM3/pinout]] page

== Resources ==

* [[Rock3/CM3/vsCM4 |Radxa CM3 vs Raspberry Pi CM4]]
* [[Rock3/CM3/models | Order Info(Models & SKU)]]
* [[Rock3/CM3/pinout | CM3 Pinout]]
* [https://dl.radxa.com/cm3/docs/radxa_cm3_product_brief_Revision_1.8_g52223c9.pdf Radxa CM3 Product Brief v1.8]
* [https://dl.radxa.com/cm3/docs/hw/radxa_cm3_dimension.dxf Radxa CM3 Dimension]

* Compliance
** [https://dl.radxa.com/cm3/docs/compliance/radxa_cm3_ce_red_report.zip CE RED]
** FCCID: [https://fccid.io/2A3PA-RADXA-CM3 2A3PA-RADXA-CM3]

* Design files of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.2_SCH_20220107.pdf v1.2 schematic pdf] - Download Schematic of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.2_CAM_20220107.pdf v1.2 CAM pdf] - Download components Position Reference of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.31A_SCH_20221010.pdf v1.3 schematic pdf] - Download Schematic of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.31A_CAM_20220526.pdf v1.3 CAM pdf] - Download components Position Reference of CM3

* Reference design of carrier board(CM3 IO Board)
** [https://github.com/radxa/radxa-cm-projects/tree/main/cm3/radxa-cm3-io CAD design files of CM3 IO board]

* [[rock3/CM3/revision | Hardware Revision]] - Difference between each hardware revisions
* [[Rock3/CM3/models | Models and SKUs]] - Different variant of each models

== Devices ==

=== Carrier Boards from Radxa ===

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Radxa_e23_top_bottom.jpg | x100px ]]
| [[Rock3/CM3/e23 | Radxa E23 Dual Ethernet board]]
|
|-
| [[File:Radxa_cm3_io_board.jpg | x100px]]
| [[Rock3/CM3/radxacm3io | Radxa CM3 IO Board ]]
|
|}

=== Carrier Boards from third party ===
The following carrier boards are tested and compatible with the Radxa CM3 '''with on-board eMMC'''.

Currently no eMMC revision cannot boot from microSD on Raspberry Pi CM4 IO and compatibles. We will fix this in a later hardware revision.

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Cm3_rpicm4_io_board.png | x100px ]]
| [[Rock3/CM3/raspcm4io | Raspberry Pi Compute Module 4 IO Board]]
| [https://www.raspberrypi.com/products/compute-module-4-io-board/ website]
|-
| [[File:Cm3_seeed_dual_gbe.png | x100px ]]
| [[Rock3/CM3/seeeddualgbe | Seeed Studio Dual Gigabit Ethernet Carrier Board]]
| [https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html website]
|-
| [[File:Cm3_waveshare_cm4_io_base.jpg | x100px ]]
| [[Rock3/CM3/wavesharecm4iobase | Waveshare CM4 IO Base]]
| [https://www.waveshare.com/wiki/CM4-IO-BASE-B website]
|-
| [[File:Cm3_mcuzone_cm4_mini.jpg | x100px]]
| [[Rock3/CM3/mcuzonecm4mini | Mcuzone CM4 Mini]]
| [https://www.aliexpress.com/item/1005001972265702.html website]
|-
| [[File:Cm3_mcuzone_cm4_tiny.jpg | x100px]]
| [[Rock3/CM3/mcuzonecm4tiny | Mcuzone CM4 Tiny]]
| [https://www.aliexpress.com/item/1005002206178734.html website]
|}

Rock3/CM/CM3

2023-12-06T10:45:04Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/CM/CM3}}

__NOTOC__

== Radxa CM3 ==

Radxa Compute Module 3(Radxa CM3) is an SoM(System on Module) by Radxa based on Rockchip RK3566 SoC in a small form factor at 55mm x 40mm size, integrating CPU/PMU/DRAM/STORAGE/Wireless. Radxa CM3 offers out of box cost-effective solution for multiple purpose applications, accelerates customer's product development.

=== Block Diagram ===

[[File:Cm3-block-diagram.jpg | 800px]]

=== Components Overview ===

{| class="wikitable"
|-
! No.
! Description
! No.
! Description
|-
| ①
| SPI Flash disable button
| ⑧
| RK817-5 PMIC
|-
| ②
| SPI Flash
| ⑨
| RTL8211F ethernet phy
|-
| ③
| eMMC disable button
| ⑩
| eMMC chip
|-
| ④
| WiFi/BT module
| ⑪
| B2B connector 2 (J68)
|-
| ⑤
| WiFi/BT antenna
| ⑫
| B2B connector 3 (J1)
|-
| ⑥
| LPDDR4 dram chip
| ⑬
| B2B connector 1 (J69)
|-
| ⑦
| RK3566 SoC
|
|
|}

[[File:Cm3-mark.jpeg | 800px]]

=== Pinout ===

Refer [[rock3/CM/CM3/pinout]] page

== Resources ==

* [[Rock3/CM3/vsCM4 |Radxa CM3 vs Raspberry Pi CM4]]
* [[Rock3/CM3/models | Order Info(Models & SKU)]]
* [[Rock3/CM3/pinout | CM3 Pinout]]
* [https://dl.radxa.com/cm3/docs/radxa_cm3_product_brief_Revision_1.8_g52223c9.pdf Radxa CM3 Product Brief v1.8]
* [https://dl.radxa.com/cm3/docs/hw/radxa_cm3_dimension.dxf Radxa CM3 Dimension]

* Compliance
** [https://dl.radxa.com/cm3/docs/compliance/radxa_cm3_ce_red_report.zip CE RED]
** FCCID: [https://fccid.io/2A3PA-RADXA-CM3 2A3PA-RADXA-CM3]

* Design files of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.2_SCH_20220107.pdf v1.2 schematic pdf] - Download Schematic of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.2_CAM_20220107.pdf v1.2 CAM pdf] - Download components Position Reference of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.31A_SCH_20221010.pdf v1.3 schematic pdf] - Download Schematic of CM3
** [https://dl.radxa.com/cm3/docs/hw/RADXA_CM3_V1.31A_CAM_20220526.pdf v1.3 CAM pdf] - Download components Position Reference of CM3

* Reference design of carrier board(CM3 IO Board)
** [https://github.com/radxa/radxa-cm-projects/tree/main/cm3/radxa-cm3-io CAD design files of CM3 IO board]

* [[rock3/CM3/revision | Hardware Revision]] - Difference between each hardware revisions
* [[Rock3/CM3/models | Models and SKUs]] - Different variant of each models

== Devices ==

=== Carrier Boards from Radxa ===

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Radxa_e23_top_bottom.jpg | x100px ]]
| [[Rock3/CM3/e23 | Radxa E23 Dual Ethernet board]]
|
|-
| [[File:Radxa_cm3_io_board.jpg | x100px]]
| [[Rock3/CM3/radxacm3io | Radxa CM3 IO Board ]]
|
|}

=== Carrier Boards from third party ===
The following carrier boards are tested and compatible with the Radxa CM3 '''with on-board eMMC'''.

Currently no eMMC revision cannot boot from microSD on Raspberry Pi CM4 IO and compatibles. We will fix this in a later hardware revision.

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Cm3_rpicm4_io_board.png | x100px ]]
| [[Rock3/CM3/raspcm4io | Raspberry Pi Compute Module 4 IO Board]]
| [https://www.raspberrypi.com/products/compute-module-4-io-board/ website]
|-
| [[File:Cm3_seeed_dual_gbe.png | x100px ]]
| [[Rock3/CM3/seeeddualgbe | Seeed Studio Dual Gigabit Ethernet Carrier Board]]
| [https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html website]
|-
| [[File:Cm3_waveshare_cm4_io_base.jpg | x100px ]]
| [[Rock3/CM3/wavesharecm4iobase | Waveshare CM4 IO Base]]
| [https://www.waveshare.com/wiki/CM4-IO-BASE-B website]
|-
| [[File:Cm3_mcuzone_cm4_mini.jpg | x100px]]
| [[Rock3/CM3/mcuzonecm4mini | Mcuzone CM4 Mini]]
| [https://www.aliexpress.com/item/1005001972265702.html website]
|-
| [[File:Cm3_mcuzone_cm4_tiny.jpg | x100px]]
| [[Rock3/CM3/mcuzonecm4tiny | Mcuzone CM4 Tiny]]
| [https://www.aliexpress.com/item/1005002206178734.html website]
|}

Rock3/CM

2023-12-06T10:31:56Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/CM}}

__NOTOC__

== Radxa Compute Module 3 Series ==

Radxa Computing Module 3 Series (Radxa CM3 Series) is a series System-on-Module based on the Rockchip RK356x series, containing processor, memory, eMMC Flash and Power Management Unit. These modules allow a designer to leverage the ROCK3 hardware and software stack in their own custom systems and form factors. In addition these modules have extra IO interfaces over and above what is available on the ROCK3 boards, opening up more options for the designer. CM3 series compute modules comes in the following form factors:

* [https://radxa.com/products/compute-module/cm3 CM3]: Compatible with Raspberry Pi CM4 in pinout and form factor
* [https://radxa.com/products/compute-module/cm3s CM3S]: Compatible with Raspberry Pi CM3/CM3+, SODIMM form factor
* [https://radxa.com/products/compute-module/cm3i/ CM3I]: Compatible with Raspberry Pi CM4 pinout in a larger size with industrial temperature range option

== Specification ==

{| class="wikitable"
|-
!
![[File:Cm3.png | 300px | link=https://radxa.com/products/compute-module/cm3]]
![[File:Cm3_sodimm.png | 300px | link=https://radxa.com/products/compute-module/cm3s]]
![[File:Cm3_plus.png | 300px | link=https://radxa.com/products/compute-module/cm3i]]
|-
!
! [https://radxa.com/products/compute-module/cm3 CM3] (In Production)
! [https://radxa.com/products/compute-module/cm3s CM3S] (In Production)
! [https://radxa.com/products/compute-module/cm3i CM3I] (In Production)
|-
| Form factor:
| 55 mm × 40 mm
| 32 mm x 67.6 mm
| 70 mm x 40 mm
|-
| SoC:
| Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 1.8GHz
| Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ '''1.6'''GHz
| Rockchip '''RK3568(J)''', Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz
|-
| NPU:
| 0.8Tops
| N/A
| 1Tops
|-
| Memory:
| colspan="3" | 1GB, 2GB, 4GB or 8GB LPDDR4 (depending on variant)
|-
| Storage:
| colspan="3" | 8GB, 16GB, 32GB, 64GB, 128GB (depending on variant) high performance eMMC
|-
| Connectivity:
| - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, BT 5.0, BLE with external antenna <br />- Onboard Gigabit Ethernet PHY <br />- 1 x USB 2.0 Host port ( highspeed ), 1 x USB 2.0 OTG, 1 x USB 3.0 port ( 5Gbps ) <br />- 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps ) <br />- 2 x SATA ports, one shared with USB 3, one shared with PCIe <br />- 50 x GPIO supporting
| - Optional wireless LAN, 2.4GHz IEEE 802.11b/g/n wireless, BT 4.2, BLE with external antenna <br />- 1 x Gigabit Ethernet MAC <br />- 1 x USB 2.0 port ( highspeed ), 1 x USB 2.0 OTG, 1 x USB 3.0 port ( 5Gbps ) <br />- 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps ) <br />- 2 x SATA ports, one shared with USB 3, one shared with PCIe <br />- 50 x GPIO supporting
| - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, BT 5.0, BLE with external antenna <br />- 1 x Onboard Gigabit Ethernet PHY, '''1x Gigabit Ethernet MAC'''<br />- 2 x USB 2.0 port ( highspeed ), <br />- 1 x USB 3.0 HOST port ( 5Gbps ), 1 x '''USB 3.0 OTG''' port ( 5Gbps ) <br />- 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps ) <br />'''- 1 x PCIe 2-lane(1x2, 1x1+1x1) Host, Gen 3 (16Gbps)'''<br />- '''3 x''' SATA ports, one shared with USB 3 HOST, one shared with PCIe, one shared with USB 3 OTG <br />- 50 x GPIO supporting
|-
| HDMI:
| - 1x HDMI up to 3840x2160 60p
| - 1x HDMI up to 1920x1080 60p
| - 1x HDMI up to 3840x2160 60p
|-
| Embedded Display:
| colspan="3" | - 1x eDP four lanes, 2.7Gps per lane <br />- 2x MIPI DSI four lanes, 1.6Gbps per lane <br />- 1x LVDS four lanes(mux with MIPI DSI0)
|-
| Audio:
| colspan="3" | - LINEOUT <br />- I2S <br />- PDM, support mic array
|-
| Multimedia:
| colspan="3" | - VP9/H.264/H.265 decode 4K@60HZ <br />- H.264/H.265 encode 1080P@100HZ <br />- OpenGL ES 3.2/OpenCL 2.0/Vulkan 1.1 GPU
|-
| Input power:
| colspan="3" | 5V DC
|-
| Connector:
| 3x 100P 0.4mm pitch B2B connector
| 200P SODIMM edge golden finger connector + 100P 0.5mm pitch B2B connector
| '''4x''' 100P 0.4mm pitch B2B connector
|-
| Production lifetime:
| colspan="3" | Radxa CM3, CM3S will remain in production until at least Sep 2029, CM3I will remain in production until at least Sep, 2032
|}

Rock5/CM

2023-11-24T12:00:34Z

Hipboi: /* Radxa Compute Module 5 */

{{rock5_header}}
{{Languages|rock5/CM}}

__NOTOC__

== Radxa CM 5==

Radxa CM5 is a series System-on-Module based on the RK3588/RK3588S, containing processor, memory, eMMC Flash and Power Management Unit. These modules allow a designer to leverage the ROCK5 software stack in their own custom systems and form factors. In addition these modules have extra IO interfaces over and above what is available on the ROCK5 boards, opening up more options for the designer.

* CM5, compatible with Radxa CM3 and Raspberry Pi CM4 in pinout and form factor
* NX5, compatible with Nvidia Jetson Nano / TX2 NX / XAVIER NX, SODIMM form factor

== Specification ==

{| class="wikitable"
|-
! Raspberry Pi CM4
! Radxa CM3(In production)
! Radxa CM5(Coming soon)
|-
| Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
| Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz
| Rockchip '''RK3588S''', Quad core Cortex-A76 (ARM v8) 64-bit SoC @ 2.4GHz + Quad core Cortex-A55 64-bit SoC @ 1.8GHz
|-
| Small Footprint 55mm × 40mm × 4.7mm module
| Small Footprint 55mm × 40mm × 4.7mm module
| Small Footprint 55mm × 40mm × 4.7mm module
|-
| Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC
| Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC
| Options for 4GB or 8GB or '''16GB LPDDR4x-4224''' SDRAM
|-
| Options for 0GB (CM4Lite), 8GB, 16GB, or 32GB eMMC Flash memory, Peak eMMC bandwidth 100MBytes/s
| Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth '''250'''MBytes/s
| Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth '''250'''MBytes/s
|-
| Option for WiFi5/BT5
| Option for WiFi5/BT5
| None
|-
| Gigabit Ethernet PHY supporting IEEE 1588
| Gigabit Ethernet PHY(RTL8211F), optional IEEE 1588 support
| 1x GMAC, without phy on SoM
|-
| 1 × USB 2.0 port ( highspeed )
| 1 x USB 2.0 port ( highspeed ), 1 x USB 3.0 port (5Gbps)
| 1 x USB 2.0 port, 1 x USB C 3.1 port (5Gbps), 1x USB 3.0 host port
|-
| 1 × PCIe 1-lane Host, Gen 2 ( 5Gbps )
| 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps )
| 2 x PCIe 1-lan host, Gen 2.1 (5Gbps)
|-
| N/A
| 2 x '''SATA''' ports, one shared with USB 3, one shared with PCIe
| 2 x '''SATA''' ports, one shared with USB 3, one shared with PCIe
|-
| 2 x HDMI 2.0(up to 4K60)
| 1 x HDMI(up to 4K60)
| 1 x HDMI(up to '''8K60''')
|-
| MIPI DSI:<br />- 1 × 2-lane MIPI DSI display port<br />- 1 × 4-lane MIPI DSI display port
| MIPI DSI:<br />- 2 × 4-lane MIPI DSI display port(MIPI DSI0, MIPI DSI1)<br />- 1 x 4-lane '''LVDS''' support(shared with MIPI DSI0)
| MIPI DSI:<br />- 2 × 4-lane MIPI DSI display port(MIPI DSI0, MIPI DSI1)
|-
|
| '''eDP''':<br />- 1 x eDP up to 4K60
| '''eDP''':<br />- 1 x eDP up to '''8K60'''(shared with HDMI)
|-
| MIPI CSI-2:<br />- 1 × 2-lane MIPI CSI camera port<br />- 1 × 4-lane MIPI CSI camera port
| MIPI CSI-2:<br />- 1 × 2-lane MIPI CSI camera port<br />- 1 × 4-lane MIPI CSI camera port
| MIPI CSI-2:<br />- 1 × 2-lane MIPI CSI camera port<br />- 1 × 4-lane MIPI CSI camera port
|-
| 1 × SDIO 2.0 (CM4Lite only)
| 1 x SDIO 3.0
| 1 x SDIO 3.0
|-
| N/A
| Audio Codec
|
|-
| 28 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:<br />- Up to 5 × UART<br />- Up to 5 × I2C<br />- Up to 5 × SPI<br />- 1 × SDIO interface<br />- 1 × DPI (Parallel RGB Display)<br />- 1 × PCM Up to<br />- 2× PWM channels<br />- Up to 3× GPCLK outputs
| 50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:<br />- Up to '''8 × UART'''<br />- Up to 8 × I2C<br />- Up to 4 × SPI<br />- 1 × SDIO interface<br />- 1 × PCM<br />- Up to '''8 × PWM''' channels<br /> - 2 x ADC
| 50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:<br />- Up to '''8 × UART'''<br />- Up to 8 × I2C<br />- Up to 4 × SPI<br />- 1 × SDIO interface<br />- 1 × PCM<br />- Up to '''8 × PWM''' channels<br /> - 2 x ADC
|-
| Single +5v PSU input
| Single +5v PSU input
| Single +5v PSU input
|-
| 2 x 100Pin B2B connector
| 3 x 100Pin B2B connector
| 3 x 100Pin B2B connector
|}

For more information, please [[Special:SpecialContact | Contact Us]].

Rock3/CM/CM3I

2023-08-05T08:09:29Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/CM/CM3I}}

__NOTOC__

== Radxa CM3I ==

Radxa CM3'''I''' is an SoM(System on Module) by Radxa based on Rockchip RK3568/RK3568J SoC in a small form factor at 40mm x 70mm size, integrating CPU/PMU/DRAM/STORAGE/Wireless. Radxa CM3I offers out of box cost-effective solution for multiple purpose applications, accelerates customer's product development. Radxa CM3 and CM3I share some of the design and are partially compatible. CM3I provides industrial environment option with operation temperature from -40° to 85° Celsius degree.

== Resources ==

* [[Rock3/CM/CM3I/models | Order Info(Models & SKU)]]
* [[Rock3/CM/CM3I/pinout | CM3I Pinout]]
* [https://dl.radxa.com/cm3 Radxa CM3I Product Brief v1.1]
* Compliance
** [https://dl.radxa.com/cm3/docs/compliance/radxa_cm3_ce_red_report.zip CE RED]
** FCCID: [https://fccid.io/2A3PA-RADXA-CM3 2A3PA-RADXA-CM3]

* Design files of CM3I
** [https://dl.radxa.com/ v1.2 schematic pdf] - Download Schematic of CM3I
** [https://dl.radxa.com/ v1.2 SMD pdf] - Download components Position Reference of CM3I
* [[rock3/CM/CM3s/revision | Hardware Revision]] - Difference between each hardware revisions
* [[Rock3/CM/CM3s/models | Models and SKUs]] - Different variant of each models

== Devices ==

=== Carrier Boards from Radxa ===

The following carrier boards are tested and compatible with the Radxa CM3I.

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Radxa_e25.png | x100px ]]
| [[Rock3/CM/CM3I/E25| Dual 2.5G ethernet board]]
| [[Rock3/CM/CM3I/E25/getting_started | Getting started]]
|}

Rock3/CM/CM3S/pinout

2023-08-05T08:07:39Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/CM/CM3S/pinout}}

[[rock3 | ROCK 3]] > [[rock3/CM | Compute Module]] > [[rock3/CM/CM3S | CM3S]] > [[rock3/CM/CM3S/pinout | CM3S Pinout]]

__TOC__

Download [https://dl.radxa.com/cm3s/docs/hw/radxa_cm3s_v1.5_pinout.xlsx radxa_cm3s_v1.5_pinout.xlsx]

{| class="wikitable"
|-
! colspan="9" | Radxa CM3S v1.5 Pinout
|-
| PIN Number
| style="background-color:#D62E4E; color:#FFF;" | Raspberry Pi CM3+
| style="background-color:#BBE33D;" | Radxa CM3 SODIMM
| style="background-color:#C5E0B4;" | Function 0
| style="background-color:#C5E0B4;" | Function 1
| style="background-color:#C5E0B4;" | Function 2
| style="background-color:#C5E0B4;" | Function 3
| style="background-color:#C5E0B4;" | Function 4
| style="background-color:#C5E0B4;" | Function 5
|-
| 1
| GND
| GND
| GND
|
|
|
|
|
|-
| 2
| EMMC_DISABLE_N
| RECOVERY
| RECOVERY
|
|
|
|
|
|-
| 3
| GPIO0/SDA0/VCLK
| I2C2_SDA_M1
| GPIO4_B4
| I2C2_SDA_M1
| EBC_GDSP
|
| ISP_FLASH_TRIGIN
| VOP_BT656_CLK_M1
|-
| 4
| SDX_VREF
| 3V3/1V8
| 3V3/1V8
|
|
|
|
|
|-
| 5
| GPIO1/SCL0/DSYNC
| I2C2_SCL_M1
| GPIO4_B5
| I2C2_SCL_M1
| EBC_SDSHR
|
| I2S1_SDO3_M1
|
|-
| 6
| SDX_VREF
| 3V3/1V8
| 3V3/1V8
|
|
|
|
|
|-
| 7
| GND
| GND
| GND
|
|
|
|
|
|-
| 8
| GND
| GND
| GND
|
|
|
|
|
|-
| 9
| GPIO2/SDA1/VSYNC
| I2C1_SDA
| GPIO0_B4
| I2C1_SDA
| PCIE20_BUTTONRSTn
| MCU_JTAG_TCK
|
|
|-
| 10
| SD3_CLK
| SDMMC0_CLK
| GPIO2_A2
| SDMMC0_CLK
| TEST_CLKOUT
| UART5_TX_M0
|
|
|-
| 11
| GPIO3/SCL1/HSYNC
| I2C1_SCL
| GPIO0_B3
| I2C1_SCL
|
| MCU_JTAG_TDO
|
|
|-
| 12
| SD3_CMD
| SDMMC0_CMD
| GPIO2_A1
| SDMMC0_CMD
| PWM10_M1
| UART5_RX_M0
|
|
|-
| 13
| GND
| GND
| GND
|
|
|
|
|
|-
| 14
| GND
| GND
| GND
|
|
|
|
|
|-
| 15
| GPIO4/GPCLK1/VID0
| I2S1_SDI2_M1
| GPIO3_D4
| CIF_D6
| EBC_SDDO6
| SDMMC2_DET_M0
| I2S1_SDI2_M1
| VOP_BT656_D6_M1
|-
| 16
| SD3_DAT0
| SDMMC0_D0
| GPIO1_D5
| SDMMC0_D0
| UART2_TX_M1
| UART6_TX_M1
| PWM8_M1
|
|-
| 17
| GPIO5/CAM_CLK/VID1
| CAM_CLK
| GPIO4_A7
| CAM_CLKOUT0
| EBC_SDCE1
| GMAC1_RXD0_M1
| SPI3_CS1_M0
| I2S1_LRCK_RX_M1
|-
| 18
| SD3_DAT1
| SDMMC0_D1
| GPIO1_D6
| SDMMC0_D1
| UART2_RX_M1
| UART6_RX_M1
| PWM9_M1
|
|-
| 19
| GND
| GND
| GND
|
|
|
|
|
|-
| 20
| GND
| GND
| GND
|
|
|
|
|
|-
| 21
| GPIO6/GPCLK2/VID2
| I2S1_SDI3_M1
| GPIO3_D5
| CIF_D7
| EBC_SDDO7
| SDMMC2_PWREN_M0
| I2S1_SDI3_M1
| VOP_BT656_D7_M1
|-
| 22
| SD3_DAT2
| SDMMC0_D2
| GPIO1_D7
| SDMMC0_D2
| ARM_JTAG_TCK
| UART5_CTSn_M0
|
|
|-
| 23
| GPIO7/SPI0_CE1/VID3
| I2S1_LRCK_RX_M1
| GPIO4_A7
| CAM_CLKOUT0
| EBC_SDCE1
| GMAC1_RXD0_M1
| SPI3_CS1_M0
| I2S1_LRCK_RX_M1
|-
| 24
| SD3_DAT3
| SDMMC0_D3
| GPIO2_A0
| SDMMC0_D3
| ARM_JTAG_TMS
| UART5_RTSn_M0
|
|
|-
| 25
| GND
| GND
| GND
|
|
|
|
|
|-
| 26
| GND
| GND
| GND
|
|
|
|
|
|-
| 27
| GPIO8/SPI0_CE0/VID4
| SPI3_CSO_M0
| GPIO4_A6
| ISP_FLASHTRIGOUT
| EBC_SDCE0
| GMAC1_TXEN_M1
| SPI3_CS0_M0
| I2S1_SCLK_RX_M1
|-
| 28
| GPIO28/SDA0/PCM_CLK
| I2C3_SDA_ACODEC
| GPIO1_A0
| I2C3_SDA_M0
| UART3_RX_M0
|
| AUDIOPWM_LOUT_P
|
|-
| 29
| GPIO9/SPI0_MISO/VID5
| SPI3_MISO_M0
| GPIO4_B0
| CAM_CLKOUT1
| EBC_SDCE2
| GMAC1_RXD1_M1
| SPI3_MISO_M0
| I2S1_SDO1_M1
|-
| 30
| GPIO29/SCL0/PCM_FS
| I2C3_SCL_ACODEC
| GPIO1_A1
| I2C3_SCL_M0
| UART3_TX_M0
|
| AUDIOPWM_LOUT_N
|
|-
| 31
| GND
| GND
| GND
|
|
|
|
|
|-
| 32
| GND
| GND
| GND
|
|
|
|
|
|-
| 33
| GPIO10/SPI0_MOSI/VID6
| SPI3_MOSI_M0
| GPIO4_B2
| I2C4_SDA_M0
| EBC_VCOM
| GMAC1_RXER_M1
| SPI3_MOSI_M0
| I2S2_SDI_M1
|-
| 34
| GPIO30/CTS2/PCM_DIN
| CAM_GPIO
| GPIO4_C1
| CIF_CLKIN
| EBC_SDCLK
| GMAC1_MCLKINOUT_M1
| UART1_CTSn_M1
| I2S2_SCLK_RX_M1
|-
| 35
| GPIO11/SPI0_SCLK/VID7
| SPI3_CLK_M0
| GPIO4_B3
| I2C4_SCL_M0
| EBC_GDOE
| ETH1_REFCLKO_25M_M1
| SPI3_CLK_M0
| I2S2_SDO_M1
|-
| 36
| GPIO31/RTS2/PCM_DOUT
| WL_NDIS
| GPIO4_B6
| CIF_HREF
| EBC_SDLE
| GMAC1_MDC_M1
| UART1_RTSn_M1
| I2S2_MCLK_M1
|-
| 37
| GND
| GND
| GND
|
|
|
|
|
|-
| 38
| GND
| GND
| GND
|
|
|
|
|
|-
| 39
| GPIO0-27_VREF
| GPIO0-27_VREF
| 3V3/1V8
|
|
|
|
|
|-
| 40
| GPIO0-27_VREF
| GPIO0-27_VREF
| 3V3/1V8
|
|
|
|
|
|-
| 41
| GPIO28-45_VREF
| GPIO28-45_VREF
| 3V3/1V8
|
|
|
|
|
|-
| 42
| GPIO28-45_VREF
| GPIO28-45_VREF
| 3V3/1V8
|
|
|
|
|
|-
| 43
| GND
| GND
| GND
|
|
|
|
|
|-
| 44
| GND
| GND
| GND
|
|
|
|
|
|-
| 45
| GPIO12/PWM0/VID8/ARM_TMS
| PMW0_M0
| GPIO0_B7
| PWM0_M0
| CPUAVS
|
|
|
|-
| 46
| GPIO32/TXD2/GPCLK0
| PDM_CLK0_M1
| GPIO3_D6
| CIF_D8
| EBC_SDDO8
| GMAC1_TXD2_M1
| UART1_TX_M1
| PDM_CLK0_M1
|-
| 47
| GPIO13/PWM1/VID9/ARM_TCK
| PWM11
| GPIO4_C0
| CIF_CLKOUT
| EBC_GDCLK
| PWM11_IR_M1
|
|
|-
| 48
| GPIO33/RXD2
| PDM_SDIO_M1
| GPIO3_D7
| CIF_D9
| EBC_SDDO9
| GMAC1_TXD3_M1
| UART1_RX_M1
| PDM_SDI0_M1
|-
| 49
| GND
| GND
| GND
|
|
|
|
|
|-
| 50
| GND
| GND
| GND
|
|
|
|
|
|-
| 51
| GPIO14/TXD1/VID10
| UART2_TX
| GPIO0_D1
| UART2_TX_M0
|
|
|
|
|-
| 52
| GPIO34/GPCLK0/SD1_CLK
| I2S1_SDI1_M1
| GPIO3_D3
| CIF_D5
| EBC_SDDO5
| SDMMC2_CLK_M0
| I2S1_SDI1_M1
| VOP_BT656_D5_M1
|-
| 53
| GPIO15/RXD1/VID11
| UART2_RX
| GPIO0_D0
| UART2_RX_M0
|
|
|
|
|-
| 54
| GPIO35/SPI0_CE1/SD1_CMD
| I2S1_SDI0_M1
| GPIO3_D2
| CIF_D4
| EBC_SDDO4
| SDMMC2_CMD_M0
| I2S1_SDI0_M1
| VOP_BT656_D4_M1
|-
| 55
| GND
| GND
| GND
|
|
|
|
|
|-
| 56
| GND
| GND
| GND
|
|
|
|
|
|-
| 57
| GPIO16/CTS1/SPI1_CE2
| PDM_SDI2_M1
| GPIO4_A2
| CIF_D12
| EBC_SDDO12
| GMAC1_RXD3_M1
| UART7_TX_M2
| PDM_SDI2_M1
|-
| 58
| GPIO36/SPI0_CE0/SD1_DAT0
| I2S1_MCLK_M1
| GPIO3_C6
| CIF_D0
| EBC_SDDO0
| SDMMC2_D0_M0
| I2S1_MCLK_M1
| VOP_BT656_D0_M1
|
|-
| 59
| GPIO17/RTS1/SPI1_CE1
| PDM_SDI3_M1
| GPIO4_A3
| CIF_D13
| EBC_SDDO13
| GMAC1_RXCLK_M1
| UART7_RX_M2
| PDM_SDI3_M1
|-
| 60
| GPIO37/SPI0_MISO/SD1_DAT1
| I2S1_SCLK_TX_M1
| GPIO3_C7
| VOP_BT656_D1_M1
| I2S1_SCLK_TX_M1
| SDMMC2_D1_M0
| EBC_SDDO1
| CIF_D1
|-
| 61
| GND
| GND
| GND
|
|
|
|
|
|-
| 62
| GND
| GND
| GND
|
|
|
|
|
|-
| 63
| GPIO18/PCM_CLK/SPI1_CE0
| SPI1_CS0_M1
| GPIO3_A1
| VOP_BT1120_D0
| SPI1_CS0_M1
| SDMMC2_D0_M1
|
|
|-
| 64
| GPIO38/SPI0_MOSI/SD1_DAT2
| I2S1_LRCK_TX_M1
| GPIO3_D0
| CIF_D2
| EBC_SDDO2
| SDMMC2_D2_M0
| I2S1_LRCK_TX_M1
| VOP_BT656_D2_M1
|-
| 65
| GPIO19/PCM_FS/SPI1_MISO
| SPI1_MISO_M1
| GPIO3_C2
| VOP_BT1120_D14
| SPI1_MISO_M1
| UART5_TX_M1
| I2S1_SDO3_M2
|
|-
| 66
| GPIO39/SPI0_SCLK/SD1_DAT3
| I2S1_SDO0_M1
| GPIO3_D1
| CIF_D3
| EBC_SDDO3
| SDMMC2_D3_M0
| I2S1_SDO0_M1
| VOP_BT656_D3_M1
|-
| 67
| GND
| GND
| GND
|
|
|
|
|
|-
| 68
| GND
| GND
| GND
|
|
|
|
|
|-
| 69
| GPIO20/PCM_DIN/SPI1_MOSI
| SPI1_MOSI_M1
| GPIO3_C1
| VOP_BT1120_D13
| SPI1_MOSI_M1
| PCIE20_PERSTn_M1
| I2S1_SDO2_M2
|
|-
| 70
| GPIO40/SPI2_MISO/SD1_DAT4/TXD3
| PI_NLED_ACTIVITY
| GPIO4_A4
| CIF_D14
| EBC_SDDO14
| GMAC1_TXD0_M1
| UART9_TX_M2
| I2S2_LRCK_TX_M1
|-
| 71
| GPIO21/PCM_DOUT/SPI1_SCLK
| SPI1_CLK_M1
| GPIO3_C3
| VOP_BT1120_D15
| SPI1_CLK_M1
| UART5_RX_M1
| I2S1_SCLK_RX_M2
|
|-
| 72
| GPIO41/SPI2_MOSI/SD1_DAT5/RXD3
| BT_NDIS
| GPIO4_A5
| CIF_D15
| EBC_SDDO15
| GMAC1_TXD1_M1
| UART9_RX_M2
| I2S2_LRCK_RX_M1
|-
| 73
| GND
| GND
| GND
|
|
|
|
|
|-
| 74
| GND
| GND
| GND
|
|
|
|
|
|-
| 75
| GPIO22/SD0_CLK/ARM_TRST
| PDM_CLK1_M1
| GPIO4_A0
| CIF_D10
| EBC_SDDO10
| GMAC1_TXCLK_M1
| PDM_CLK1_M1
|
|-
| 76
| GPIO42/SPI2_SCLK/SD1_DAT6/RTS3
| I2S1_SDO2_M1
| GPIO4_B1
| ISP_PRELIGHT_TRIG
| EBC_SDCE3
| GMAC1_RXDV_CRS_M1
| I2S1_SDO2_M1
|
|-
| 77
| GPIO23/SD0_CMD/ARM_RTCK
| SPI0_CS1_M0
| GPIO0_C4
| PWM5
| SPI0_CS1_M0
| UART0_RTSn
|
|
|-
| 78
| GPIO43/SPI2_CE0/SD1_DAT7/CTS3
| 24C02_WP
| GPIO0_C0
| PWM1_M0
| GPUAVS
| UART0_RX
|
|
|-
| 79
| GND
| GND
| GND
|
|
|
|
|
|-
| 80
| GND
| GND
| GND
|
|
|
|
|
|-
| 81
| GPIO24/SD0_DAT0/ARM_TDO
| SPI0_CSO_MO
| GPIO0_C6
| PWM7_IR
| SPI0_CS0_M0
|
|
|
|-
| 82
| GPIO44/GPCLK2/SDA3/SPI2_CE1
| PDM_SDI1_M1
| GPIO4_A1
| CIF_D11
| EBC_SDDO11
| GMAC1_RXD2_M1
| PDM_SDI1_M1
|
|-
| 83
| GPIO25/SD0_DAT1/ARM_TCK
| SPI0_MISO_MO
| GPIO0_C5
| PWM6
| SPI0_MISO_M0
|
|
|
|-
| 84
| GPIO45/PWM2/SCL3/SPI2_CE2
| PMW0_M1
| GPIO0_C7
| HDMITX_CEC_M1
| PWM0_M1
| UART0_CTSn
|
|
|-
| 85
| GND
| GND
| GND
|
|
|
|
|
|-
| 86
| GND
| GND
| GND
|
|
|
|
|
|-
| 87
| GPIO26/SD0_DAT2/ARM_TDI
| I2C2_SDA_MO
| GPIO0_B6
| I2C2_SDA_M0
| SPI0_MOSI_M0
| PCIE20_PERSTn_M0
| PWM2_M1
|
|-
| 88
| SDA4/HDMI_HPD_P
| HDMI_TX_HPD_PORT
| HDMI_TX_HPDIN
|
|
|
|
|
|-
| 89
| GPIO27/SD0_DAT3/ARM_TMS
| I2C2_SCL_MO
| GPIO0_B5
| I2C2_SCL_M0
| SPI0_CLK_M0
| PCIE20_WAKEn_M0
| PWM1_M1
|
|-
| 90
| SCL4/SD3_CARD_DET
| NC
|
|
|
|
|
|
|-
| 91
| GND
| GND
| GND
|
|
|
|
|
|-
| 92
| GND
| GND
| GND
|
|
|
|
|
|-
| 93
| DSI0_DN1
| MIPI_DSI_TX1_D1N
| MIPI_DSI_TX1_D1N
|
|
|
|
|
|-
| 94
| DSI1_DP0
| MIPI_DSI_TX0_D0P/LVDS_TX0_D0P
| MIPI_DSI_TX0_D0P
| LVDS_TX0_D0P
|
|
|
|
|-
| 95
| DSI0_DP1
| MIPI_DSI_TX1_D1P
| MIPI_DSI_TX1_D1P
|
|
|
|
|
|-
| 96
| DSI1_DN0
| MIPI_DSI_TX0_D0N/LVDS_TX0_D0N
| MIPI_DSI_TX0_D0N
| LVDS_TX0_D0N
|
|
|
|
|-
| 97
| GND
| GND
| GND
|
|
|
|
|
|-
| 98
| GND
| GND
| GND
|
|
|
|
|
|-
| 99
| DSI0_DN0
| MIPI_DSI_TX1_D0N
| MIPI_DSI_TX1_D0N
|
|
|
|
|
|-
| 100
| DSI1_CP
| MIPI_DSI_TX0_CLKP/LVDS_TX0_CLKP
| MIPI_DSI_TX0_CLKP
| LVDS_TX0_CLKP
|
|
|
|
|-
| 101
| DSI0_DP0
| MIPI_DSI_TX1_D0P
| MIPI_DSI_TX1_D0P
|
|
|
|
|
|-
| 102
| DSI1_CN
| MIPI_DSI_TX0_CLKN/LVDS_TX0_CLKN
| MIPI_DSI_TX0_CLKN
| LVDS_TX0_CLKN
|
|
|
|
|-
| 103
| GND
| GND
| GND
|
|
|
|
|
|-
| 104
| GND
| GND
| GND
|
|
|
|
|
|-
| 105
| DSI0_CN
| MIPI_DSI_TX1_CLKN
| MIPI_DSI_TX1_CLKN
|
|
|
|
|
|-
| 106
| DSI1_DP3
| MIPI_DSI_TX0_D3P/LVDS_TX0_D3P
| MIPI_DSI_TX0_D3P
| LVDS_TX0_D3P
|
|
|
|
|-
| 107
| DSI0_CP
| MIPI_DSI_TX1_CLKP
| MIPI_DSI_TX1_CLKP
|
|
|
|
|
|-
| 108
| DSI1_DN3
| MIPI_DSI_TX0_D3N/LVDS_TX0_D3N
| MIPI_DSI_TX0_D3N
| LVDS_TX0_D3N
|
|
|
|
|-
| 109
| GND
| GND
| GND
|
|
|
|
|
|-
| 110
| GND
| GND
| GND
|
|
|
|
|
|-
| 111
| HDMI_CK_N
| HDMI_TXCLKN_PORT
| HDMI_TX_CLKN
|
|
|
|
|
|-
| 112
| DSI1_DP2
| MIPI_DSI_TX0_D2P/LVDS_TX0_D2P
| MIPI_DSI_TX0_D2P
| LVDS_TX0_D2P
|
|
|
|
|-
| 113
| HDMI_CK_P
| HDMI_TXCLKP_PORT
| HDMI_TX_CLKP
|
|
|
|
|
|-
| 114
| DSI1_DN2
| MIPI_DSI_TX0_D2N/LVDS_TX0_D2N
| MIPI_DSI_TX0_D2N
| LVDS_TX0_D2N
|
|
|
|
|-
| 115
| GND
| GND
| GND
|
|
|
|
|
|-
| 116
| GND
| GND
| GND
|
|
|
|
|
|-
| 117
| HDMI_D0_N
| HDMI_TX0N_PORT
| HDMI_TX_D0N
|
|
|
|
|
|-
| 118
| DSI1_DP1
| MIPI_DSI_TX0_D1P/LVDS_TX0_D1P
| MIPI_DSI_TX0_D1P
| LVDS_TX0_D1P
|
|
|
|
|-
| 119
| HDMI_D0_P
| HDMI_TX0P_PORT
| HDMI_TX_D0P
|
|
|
|
|
|-
| 120
| MIPI_DSI_TX0_D1N/LVDS_TX0_D1N
| MIPI_DSI_TX0_D1N
| LVDS_TX0_D1N
|
|
|
|
|
|-
| 121
| GND
| GND
| GND
|
|
|
|
|
|-
| 122
| GND
| GND
| GND
|
|
|
|
|
|-
| 123
| HDMI_D1_N
| HDMI_TX1N_PORT
| HDMI_TX_D1N
|
|
|
|
|
|-
| 124
| NC
| PCIE20_RXP
| PCIE20_RXP
| SATA2_RXP
|
|
|
|
|-
| 125
| HDMI_D1_P
| HDMI_TX1P_PORT
| HDMI_TX_D1P
|
|
|
|
|
|-
| 126
| NC
| PCIE20_RXN
| PCIE20_RXN
| SATA2_RXN
|
|
|
|
|-
| 127
| GND
| GND
| GND
|
|
|
|
|
|-
| 128
| NC
| GND
| GND
|
|
|
|
|
|-
| 129
| HDMI_D2_N
| HDMI_TX2N_PORT
| HDMI_TX_D2N
|
|
|
|
|
|-
| 130
| NC
| PCIE20_TXP
| PCIE20_TXP
| SATA2_TXP
|
|
|
|
|-
| 131
| HDMI_D2_P
| HDMI_TX2P_PORT
| HDMI_TX_D2P
|
|
|
|
|
|-
| 132
| NC
| PCIE20_TXN
| PCIE20_TXN
| SATA2_TXN
|
|
|
|
|-
| 133
| GND
| GND
| GND
|
|
|
|
|
|-
| 134
| GND
| GND
| GND
|
|
|
|
|
|-
| 135
| CAM1_DP3
| NC
| NC
|
|
|
|
|
|-
| 136
| CAM0_DP0
| MIPI_CSI_RX_D2P
| MIPI_CSI_RX_D2P
|
|
|
|
|
|-
| 137
| CAM1_DN3
| NC
| NC
|
|
|
|
|
|-
| 138
| CAM0_DN0
| MIPI_CSI_RX_D2N
| MIPI_CSI_RX_D2N
|
|
|
|
|
|-
| 139
| GND
| GND
| GND
|
|
|
|
|
|-
| 140
| GND
| GND
| GND
|
|
|
|
|
|-
| 141
| CAM1_DP2
| NC
| NC
|
|
|
|
|
|-
| 142
| CAM0_CP
| MIPI_CSI_RX_CLK1P
| MIPI_CSI_RX_CLK1P
|
|
|
|
|
|-
| 143
| CAM1_DN2
| NC
| NC
|
|
|
|
|
|-
| 144
| CAM0_CN
| MIPI_CSI_RX_CLK1N
| MIPI_CSI_RX_CLK1N
|
|
|
|
|
|-
| 145
| GND
| GND
| GND
|
|
|
|
|
|-
| 146
| GND
| GND
| GND
|
|
|
|
|
|-
| 147
| CAM1_CP
| MIPI_CSI_RX_CLK0P
| MIPI_CSI_RX_CLK0P
|
|
|
|
|
|-
| 148
| CAM0_DP1
| MIPI_CSI_RX_D3P
| MIPI_CSI_RX_D3P
|
|
|
|
|
|-
| 149
| CAM1_CN
| MIPI_CSI_RX_CLK0N
| MIPI_CSI_RX_CLK0N
|
|
|
|
|
|-
| 150
| CAM0_DN1
| MIPI_CSI_RX_D3N
| MIPI_CSI_RX_D3N
|
|
|
|
|
|-
| 151
| GND
| GND
| GND
|
|
|
|
|
|-
| 152
| GND
| GND
| GND
|
|
|
|
|
|-
| 153
| CAM1_DP1
| MIPI_CSI_RX_D1P
| MIPI_CSI_RX_D1P
|
|
|
|
|
|-
| 154
| NC
| PCIE20_REFCLKP
| PCIE20_REFCLKP
|
|
|
|
|
|-
| 155
| CAM1_DN1
| MIPI_CSI_RX_D1N
| MIPI_CSI_RX_D1N
|
|
|
|
|
|-
| 156
| NC
| PCIE20_REFCLKN
| PCIE20_REFCLKN
|
|
|
|
|
|-
| 157
| GND
| GND
| GND
|
|
|
|
|
|-
| 158
| NC
| GND
| GND
|
|
|
|
|
|-
| 159
| CAM1_DP0
| MIPI_CSI_RX_D0P
| MIPI_CSI_RX_D0P
|
|
|
|
|
|-
| 160
| NC
| PCIE20_CLKREQn_M2
| GPIO1_B0
| I2S1_SDO1_M0
| I2S1_SDI3_M0
| PDM_SDI3_M0
| PCIE20_CLKREQn_M2
|
|-
| 161
| CAM1_DN0
| MIPI_CSI_RX_D0N
| MIPI_CSI_RX_D0N
|
|
|
|
|
|-
| 162
| NC
| TF_DET_H
| TF_DET_H
|
|
|
|
|
|-
| 163
| GND
| GND
| GND
|
|
|
|
|
|-
| 164
| GND
| GND
| GND
|
|
|
|
|
|-
| 165
| USB_DP
| USB_OTG0_DP
| USB_OTG0_DP
|
|
|
|
|
|-
| 166
| TVDAC
| SARADC_IN3
| SARADC_VIN3
|
|
|
|
|
|-
| 167
| USB_DM
| USB_OTG0_DM
| USB_OTG0_DM
|
|
|
|
|
|-
| 168
| USB_OTGID
| USB_OTG0_ID
| USB_OTG0_ID
|
|
|
|
|
|-
| 169
| GND
| GND
| GND
|
|
|
|
|
|-
| 170
| GND
| GND
| GND
|
|
|
|
|
|-
| 171
| HDMI_CEC
| HDMI_TX_CEC_PORT
| GPIO4_D1
| HDMITX_CEC_M0
| SPI3_CS1_M1
|
|
|
|-
| 172
| VC_TRST_N
| PMW4
| GPIO0_C3
| PWM4
| VOP_PWM_M0
| MCU_JTAG_TRSTn
|
|
|-
| 173
| HDMI_SDA
| HDMI_TXDDC_SDA_PORT
| GPIO4_D0
| HDMITX_SDA
| I2C5_SDA_M1
|
|
|
|-
| 174
| VC_TDI
| GPIO_C1
| GPIO0_C1
| PWM2_M0
| NPUAVS
| UART0_TX
| MCU_JTAG_TDI
|
|-
| 175
| HDMI_SCL
| HDMI_TXDDC_SCL_PORT
| HDMITX_SCL
| I2C5_SCL_M1
|
|
|
|
|-
| 176
| VC_TMS
| PWM3_IR
| GPIO0_C2
| PWM3_IR
| EDP_HPDIN_M1
| MCU_JTAG_TMS
|
|
|-
| 177
| RUN
| PWRON_KEY
| PWRON_KEY
|
|
|
|
|
|-
| 178
| VC_TDO
| 4G_DISABLE
| GPIO4_C5
| PWM12_M1
| SPI3_MISO_M1
| SATA1_ACT_LED
| UART9_TX_M1
| I2S3_SDO_M1
|-
| 179
| VDD_CORE
| NC
| NC
|
|
|
|
|
|-
| 180
| VC_TCK
| HP_DET_L
| GPIO4_C6
| PWM13_M1
| SPI3_CS0_M1
| SATA0_ACT_LED
| UART9_RX_M1
| I2S3_SDI_M1
|-
| 181
| GND
| GND
| GND
|
|
|
|
|
|-
| 182
| GND
| GND
| GND
|
|
|
|
|
|-
| 183
| CM_1V8
| NC
| NC
|
|
|
|
|
|-
| 184
| CM_1V8
| NC
| NC
|
|
|
|
|
|-
| 185
| CM_1V8
| NC
| NC
|
|
|
|
|
|-
| 186
| CM_1V8
| NC
| NC
|
|
|
|
|
|-
| 187
| GND
| GND
| GND
|
|
|
|
|
|-
| 188
| GND
| GND
| GND
|
|
|
|
|
|-
| 189
| CM_VDAC
| NC
| NC
|
|
|
|
|
|-
| 190
| CM_VDAC
| NC
| NC
|
|
|
|
|
|-
| 191
| CM_3V3
| NC
| NC
|
|
|
|
|
|-
| 192
| CM_3V3
| NC
| NC
|
|
|
|
|
|-
| 193
| CM_3V3
| NC
| NC
|
|
|
|
|
|-
| 194
| CM_3V3
| NC
| NC
|
|
|
|
|
|-
| 195
| GND
| GND
| GND
|
|
|
|
|
|-
| 196
| GND
| GND
| GND
|
|
|
|
|
|-
| 197
| CM_VBAT
| 5V_INPUT
| 5V
|
|
|
|
|
|-
| 198
| CM_VBAT
| 5V_INPUT
| 5V
|
|
|
|
|
|-
| 199
| CM_VBAT
| 5V_INPUT
| 5V
|
|
|
|
|
|-
| 200
| CM_VBAT
| 5V_INPUT
| 5V
|
|
|
|
|
|}

Rock3/hardware/models

2023-08-05T08:06:13Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/hardware/models}}

__NOTOC__

[[rock3 | Radxa ROCK 3]] > [[rock3/hardware | Hardware]] > [[rock3/hardware/models | Models & SKU]]

== ROCK 3A/3B ==

ROCK 3A is a stripped down version of ROCK 3B in smaller size and less features. ROCK 3A comes in 2GB, 4GB, 8GB ram and ROCK 3B come in 4GB, 8GB ram.

* U variant: USB signal on GPIO PIN 25&27 instead of I2C

{| class="wikitable"
|- style="font-weight:bold; text-align:center;"
! Model
! SKU
! RAM
! GPIO 25&27
! Note
|-
| ROCK 3A 2GB
| RS117-D2U0
| 2GB
| I2C
| 🔴
|-
| ROCK 3A 2GB with USB export
| RS117-D2U1
| 2GB
| USB
| 🔴
|-
| ROCK 3A 4GB
| RS117-D4U0
| 4GB
| I2C
| 🟠
|-
| ROCK 3A 4GB with USB export
| RS117-D4U1
| 4GB
| USB
| 🟠
|-
| ROCK 3A 8GB
| RS117-D8U0
| 8GB
| I2C
| 🟡
|-
| ROCK 3A 8GB with USB export
| RS117-D8U1
| 8GB
| USB
| 🟡
|-
| ROCK 3B 4GB
| RS118-D4U0
| 4GB
| I2C
| 🟢
|-
| ROCK 3B 8GB
| RS118-D8U0
| 8GB
| I2C
| ⚫️
|}

== CM3 / CM3S / CM3I ==
see [[Rock3/CM3/models]]

Rock3/CM/CM3S

2023-08-05T08:05:35Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/CM/CM3s}}

__NOTOC__

== Radxa CM3S ==

Radxa CM3S is an SoM(System on Module) by Radxa based on Rockchip RK3566 SoC in a small form factor at 32mm x 67.6mm size, integrating CPU/PMU/DRAM/STORAGE/Wireless. Radxa CM3S offers out of box cost-effective solution for multiple purpose applications, accelerates customer's product development. Radxa CM3 and CM3S share most of the design but layout in different form factor, the software can just work on CM3 and CM3S without modifications.

== Resources ==

* [[Rock3/CM/CM3S/radxa_cm3s_vs_raspberrypi_cm3p | Radxa CM3S vs Raspberry Pi CM3+]]
* [[Rock3/CM/CM3S/models | Order Info(Models & SKU)]]
* [[Rock3/CM/CM3S/pinout | CM3S Pinout]]
* [https://dl.radxa.com/cm3 Radxa CM3S Datasheet v1.1]
* Compliance
** [https://dl.radxa.com/cm3/docs/compliance/radxa_cm3_ce_red_report.zip CE RED]
** FCCID: [https://fccid.io/2A3PA-RADXA-CM3 2A3PA-RADXA-CM3]

* Design files of CM3S
** [https://dl.radxa.com/ v1.2 schematic pdf] - Download Schematic of CM3S
** [https://dl.radxa.com/ v1.2 SMD pdf] - Download components Position Reference of CM3S
* [[rock3/CM/CM3s/revision | Hardware Revision]] - Difference between each hardware revisions
* [[Rock3/CM/CM3S/models | Order Info(Models & SKU)]] - Different variant of each models

== Devices ==

=== Carrier Boards from third party ===

The following carrier boards are tested and compatible with the Radxa CM3S.

{| class="wikitable"
|-
! Picture
! Name
! Info
|-
| [[File:Waveshare_compute_module_poe_board.jpg | x100px ]]
| [[Rock3/CM/CM3S/wavesharecmpoeboard | Waveshare Compute Module PoE Board]]
| [https://www.waveshare.com/wiki/Compute_Module_PoE_Board Waveshare Wiki]
|}

Rock3/CM/CM3S/models

2023-08-05T08:04:45Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/CM3/models}}

[[rock3 | ROCK 3]] > [[rock3/CM3 | Compute Module]] > [[Rock3/CM/CM3S | CM3S]] > [[rock3/CM/CM3S/models | Models and SKU]]

<div class="col-md-12 ">
== CM3S ==
<div class="col-md-4 ">
{| class="wikitable" style="vertical-align:middle;"
|- style="font-weight:bold; text-align:center;"
! Wireless
! RAM
! eMMC
! SKU
|-
| rowspan="20" | Yes(WiFi 4/BT 4)
| rowspan="4" | 1G
| -
| RM117-D1E0W3
|-
| 8G
| '''RM117-D1E8W3'''
|-
| 16G
| RM117-D1E16W3
|-
| 32G
| RM117-D1E32W3
|-
| rowspan="4" | 2G
| -
| RM117-D2E0W3
|-
| 8G
| '''RM117-D2E8W3'''
|-
| 16G
| RM117-D2E16W3
|-
| 32G
| RM117-D2E32W3
|-
| rowspan="6" | 4G
| -
| RM117-D4E0W3
|-
| 8G
| RM117-D4E8W3
|-
| 16G
| RM117-D4E16W3
|-
| 32G
| RM117-D4E32W3
|-
| 64G
| RM117-D4E64W3
|-
| 128G
| RM117-D4E128W3
|-
| rowspan="6" | 8G
| -
| RM117-D8E0W3
|-
| 8G
| RM117-D8E8W3
|-
| 16G
| RM117-D8E16W3
|-
| 32G
| RM117-D8E32W3
|-
| 64G
| RM117-D8E64W3
|-
| 128G
| RM117-D8E128W3
|}

</div>

<div class="col-md-4 ">
{| class="wikitable" style="vertical-align:middle;"
|- style="font-weight:bold; text-align:center;"
! Wireless
! RAM
! eMMC
! SKU
|-
| rowspan="20" | No
| rowspan="4" | 1G
| -
| '''RM117-D1E0W0'''
|-
| 8G
| RM117-D1E8W0
|-
| 16G
| RM117-D1E16W0
|-
| 32G
| RM117-D1E32W0
|-
| rowspan="4" | 2G
| -
| RM117-D2E0W0
|-
| 8G
| RM117-D2E8W0
|-
| 16G
| RM117-D2E16W0
|-
| 32G
| RM117-D2E32W0
|-
| rowspan="6" | 4G
| -
| RM117-D4E0W0
|-
| 8G
| RM117-D4E8W0
|-
| 16G
| RM117-D4E16W0
|-
| 32G
| RM117-D4E32W0
|-
| 64G
| RM117-D4E64W0
|-
| 128G
| RM117-D4E128W0
|-
| rowspan="6" | 8G
| -
| RM117-D8E0W0
|-
| 8G
| RM117-D8E8W0
|-
| 16G
| RM117-D8E16W0
|-
| 32G
| RM117-D8E32W0
|-
| 64G
| RM117-D8E64W0
|-
| 128G
| RM117-D8E128W0
|}
</div>
</div>

''Note'': SKU in bold are common SKUs, no MoQ required.

Rock3/CM

2023-08-05T08:02:15Z

Hipboi:

{{rock3_header}}
{{Languages|rock3/CM}}

__NOTOC__

== Radxa Compute Module 3 Series ==

Radxa Computing Module 3 Series (Radxa CM3 Series) is a series System-on-Module based on the Radxa ROCK 3 series, containing processor, memory, eMMC Flash and Power Management Unit. These modules allow a designer to leverage the ROCK3 hardware and software stack in their own custom systems and form factors. In addition these modules have extra IO interfaces over and above what is available on the ROCK3 boards, opening up more options for the designer. ROCK3 series compute modules comes in the following form factors:

* [[ rock3/CM/CM3 | CM3 ]]: Compatible with Raspberry Pi CM4 in pinout and form factor
* [[ rock3/CM/CM3S | CM3S]]: Compatible with Raspberry Pi CM3/CM3+, SODIMM form factor
* [[ rock3/CM/CM3I | CM3I]]: Compatible with Raspberry Pi CM4 pinout in a larger size with industrial temperature range option

== Specification ==

{| class="wikitable"
|-
!
![[File:Cm3.png | 300px | link=rock3/CM/CM3]]
![[File:Cm3_sodimm.png | 300px | link=rock3/CM/CM3S]]
![[File:Cm3_plus.png | 300px | link=rock3/CM/CM3i]]
|-
!
! [[ rock3/CM/CM3 | CM3 ]] (In Production)
! [[ rock3/CM/CM3S | CM3S]] (In Production)
! [[ rock3/CM/CM3I | CM3I]] (Samples)
|-
| Form factor:
| 55 mm × 40 mm
| 32 mm x 67.6 mm
| 70 mm x 40 mm
|-
| SoC:
| Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 1.8GHz
| Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ '''1.6'''GHz
| Rockchip '''RK3568''', Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz
|-
| NPU:
| 0.8Tops
| N/A
| 1Tops

|-
| Memory:
| colspan="3" | 1GB, 2GB, 4GB or 8GB LPDDR4 (depending on variant)
|
|-
| Storage:
| colspan="3" | 8GB, 16GB, 32GB, 64GB, 128GB (depending on variant) high performance eMMC
|
|-
| Connectivity:
| - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, BT 5.0, BLE with external antenna <br />- Onboard Gigabit Ethernet PHY <br />- 1 x USB 2.0 Host port ( highspeed ), 1 x USB 2.0 OTG, 1 x USB 3.0 port ( 5Gbps ) <br />- 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps ) <br />- 2 x SATA ports, one shared with USB 3, one shared with PCIe <br />- 50 x GPIO supporting
| - Optional wireless LAN, 2.4GHz IEEE 802.11b/g/n wireless, BT 4.2, BLE with external antenna <br />- 1 x Gigabit Ethernet MAC <br />- 1 x USB 2.0 port ( highspeed ), 1 x USB 2.0 OTG, 1 x USB 3.0 port ( 5Gbps ) <br />- 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps ) <br />- 2 x SATA ports, one shared with USB 3, one shared with PCIe <br />- 50 x GPIO supporting
| - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, BT 5.0, BLE with external antenna <br />- 1 x Onboard Gigabit Ethernet PHY, '''1x Gigabit Ethernet MAC'''<br />- 2 x USB 2.0 port ( highspeed ), <br />- 1 x USB 3.0 HOST port ( 5Gbps ), 1 x '''USB 3.0 OTG''' port ( 5Gbps ) <br />- 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps ) <br />'''- 1 x PCIe 2-lane(1x2, 1x1+1x1) Host, Gen 3 (16Gbps)'''<br />- '''3 x''' SATA ports, one shared with USB 3 HOST, one shared with PCIe, one shared with USB 3 OTG <br />- 50 x GPIO supporting
|-
| HDMI:
| - 1x HDMI up to 3840x2160 60p
| - 1x HDMI up to 1920x1080 60p
| - 1x HDMI up to 3840x2160 60p
|
|-
| Embedded Display:
| colspan="3" | - 1x eDP four lanes, 2.7Gps per lane <br />- 2x MIPI DSI four lanes, 1.6Gbps per lane <br />- 1x LVDS four lanes(mux with MIPI DSI0)
|
|-
| Audio:
| colspan="3" | - LINEOUT <br />- I2S <br />- PDM, support mic array
|
|-
| Multimedia:
| colspan="3" | - VP9/H.264/H.265 decode 4K@60HZ <br />- H.264/H.265 encode 1080P@100HZ <br />- OpenGL ES 3.2/OpenCL 2.0/Vulkan 1.1 GPU
|
|-
| Input power:
| colspan="3" | 5V DC
|
|
|-
| Connector:
| 3x 100P 0.4mm pitch B2B connector
| 200P SODIMM edge golden finger connector + 100P 0.5mm pitch B2B connector
| '''4x''' 100P 0.4mm pitch B2B connector
|-
| Production lifetime:
| colspan="3" | Radxa CM3, CM3S will remain in production until at least Sep 2029, CM3I will remain in production until at least Sep, 2032
|}

Rock5/CM

2023-07-21T08:12:34Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/CM}}

__NOTOC__

== Radxa Compute Module 5==

Radxa Computing Module 5(Radxa CM5) is a series System-on-Module based on the RK3588/RK3588S, containing processor, memory, eMMC Flash and Power Management Unit. These modules allow a designer to leverage the ROCK5 software stack in their own custom systems and form factors. In addition these modules have extra IO interfaces over and above what is available on the ROCK5 boards, opening up more options for the designer.

* CM5, compatible with Radxa CM3 and Raspberry Pi CM4 in pinout and form factor
* NX5, compatible with Nvidia Jetson Nano / TX2 NX / XAVIER NX, SODIMM form factor

== Specification ==

{| class="wikitable"
|-
! Raspberry Pi CM4
! Radxa CM3(In production)
! Radxa CM5(Coming soon)
|-
| Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
| Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz
| Rockchip '''RK3588S''', Quad core Cortex-A76 (ARM v8) 64-bit SoC @ 2.4GHz + Quad core Cortex-A55 64-bit SoC @ 1.8GHz
|-
| Small Footprint 55mm × 40mm × 4.7mm module
| Small Footprint 55mm × 40mm × 4.7mm module
| Small Footprint 55mm × 40mm × 4.7mm module
|-
| Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC
| Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC
| Options for 4GB or 8GB or '''16GB LPDDR4x-4224''' SDRAM
|-
| Options for 0GB (CM4Lite), 8GB, 16GB, or 32GB eMMC Flash memory, Peak eMMC bandwidth 100MBytes/s
| Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth '''250'''MBytes/s
| Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth '''250'''MBytes/s
|-
| Option for WiFi5/BT5
| Option for WiFi5/BT5
| None
|-
| Gigabit Ethernet PHY supporting IEEE 1588
| Gigabit Ethernet PHY(RTL8211F), optional IEEE 1588 support
| 1x GMAC, without phy on SoM
|-
| 1 × USB 2.0 port ( highspeed )
| 1 x USB 2.0 port ( highspeed ), 1 x USB 3.0 port (5Gbps)
| 1 x USB 2.0 port, 1 x USB C 3.1 port (5Gbps), 1x USB 3.0 host port
|-
| 1 × PCIe 1-lane Host, Gen 2 ( 5Gbps )
| 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps )
| 2 x PCIe 1-lan host, Gen 2.1 (5Gbps)
|-
| N/A
| 2 x '''SATA''' ports, one shared with USB 3, one shared with PCIe
| 2 x '''SATA''' ports, one shared with USB 3, one shared with PCIe
|-
| 2 x HDMI 2.0(up to 4K60)
| 1 x HDMI(up to 4K60)
| 1 x HDMI(up to '''8K60''')
|-
| MIPI DSI:<br />- 1 × 2-lane MIPI DSI display port<br />- 1 × 4-lane MIPI DSI display port
| MIPI DSI:<br />- 2 × 4-lane MIPI DSI display port(MIPI DSI0, MIPI DSI1)<br />- 1 x 4-lane '''LVDS''' support(shared with MIPI DSI0)
| MIPI DSI:<br />- 2 × 4-lane MIPI DSI display port(MIPI DSI0, MIPI DSI1)
|-
|
| '''eDP''':<br />- 1 x eDP up to 4K60
| '''eDP''':<br />- 1 x eDP up to '''8K60'''(shared with HDMI)
|-
| MIPI CSI-2:<br />- 1 × 2-lane MIPI CSI camera port<br />- 1 × 4-lane MIPI CSI camera port
| MIPI CSI-2:<br />- 1 × 2-lane MIPI CSI camera port<br />- 1 × 4-lane MIPI CSI camera port
| MIPI CSI-2:<br />- 1 × 2-lane MIPI CSI camera port<br />- 1 × 4-lane MIPI CSI camera port
|-
| 1 × SDIO 2.0 (CM4Lite only)
| 1 x SDIO 3.0
| 1 x SDIO 3.0
|-
| N/A
| Audio Codec
|
|-
| 28 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:<br />- Up to 5 × UART<br />- Up to 5 × I2C<br />- Up to 5 × SPI<br />- 1 × SDIO interface<br />- 1 × DPI (Parallel RGB Display)<br />- 1 × PCM Up to<br />- 2× PWM channels<br />- Up to 3× GPCLK outputs
| 50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:<br />- Up to '''8 × UART'''<br />- Up to 8 × I2C<br />- Up to 4 × SPI<br />- 1 × SDIO interface<br />- 1 × PCM<br />- Up to '''8 × PWM''' channels<br /> - 2 x ADC
| 50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:<br />- Up to '''8 × UART'''<br />- Up to 8 × I2C<br />- Up to 4 × SPI<br />- 1 × SDIO interface<br />- 1 × PCM<br />- Up to '''8 × PWM''' channels<br /> - 2 x ADC
|-
| Single +5v PSU input
| Single +5v PSU input
| Single +5v PSU input
|-
| 2 x 100Pin B2B connector
| 3 x 100Pin B2B connector
| 3 x 100Pin B2B connector
|}

For more information, please [[Special:SpecialContact | Contact Us]].

Rock5/guide/build-u-boot-on-5b

2023-07-18T10:30:21Z

Hipboi:

{{rock5_header}}
{{Languages|rock5/guide/build-u-boot-on-5b}}

[[rock5 | ROCK 5]] > [[rock5/guide | Guide]] > [[rock5/guide/build-u-boot-on-5b | Build U-Boot on ROCK 5B]]

== Build Vendor U-Boot on Rock 5B ==
Vendor U-Boot can be compiled and flashed on the Rock 5B device from the Linux distribution. For mainline U-boot, please check [https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/upstream_uboot.md collabora's upstream uboot note]

=== Preparation ===

1. Install the necessary build dependencies:

sudo apt-get update
sudo apt-get install -y git device-tree-compiler libncurses5 libncurses5-dev build-essential libssl-dev mtools bc python dosfstools flex bison

If you're not using Debian or Ubuntu, you'll need to install the equivalent packages for your distribution.

2. Set up your workspace and get the source code from the Radxa Git repositories:

mkdir ~/rk3588-sdk && cd ~/rk3588-sdk
git clone -b stable-5.10-rock5 https://github.com/radxa/u-boot.git
git clone -b master https://github.com/radxa/rkbin.git
git clone -b debian https://github.com/radxa/build.git

And you will get

/~/rk3588-sdk/
├── build
├── rkbin
└── u-boot

* <code>~/rk3588-sdk/build/</code>: Radxa helper script files and configuration files for building U-Boot, Linux kernel and rootfs.
* <code>~/rk3588-sdk/rkbin/</code>: Pre-built Rockchip binaries, including first stage loader and ATF (Arm Trustzone Firmware)
* <code>~/rk3588-sdk/u-boot/</code>: Second stage bootloader used to start the OS (e.g. Linux or Android)

=== Build U-Boot ===

Compile U-Boot with the <code>rock-5b-rk3588_defconfig</code>:
cd ~/rk3588-sdk
./build/mk-uboot.sh rk3588-rock-5b #For ROCK 5B

After a successful build, the <code>~/rk3588-sdk/out/u-boot</code> directory will be populated
~/rk3588-sdk/out/u-boot
├── idbloader.img
├── rk3588_spl_loader_v1.08.111.bin
├── spi
│ └── spi_image.img
└── u-boot.itb

=== Flash U-Boot ===
Once you've built U-Boot, you can flash it to your desired storage device.
Booting directly from an NVMe device requires flashing U-Boot to SPI (see [[rock5/guide/spi-nvme-boot | SPI NVMe Boot Guide]]).

Note that [[Rock5/downloads | flashable OS images]] already include U-Boot, so manually flashing U-Boot is not necessary for eMMC or SD Card installs.

The following commands assume they are run from the <code>~/rk3588-sdk</code> directory.

===== eMMC =====
⚠️ Some versions of the Rock 5B kernel have the eMMC and SD Card devices swapped

sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk0 bs=512 seek=64
sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk0 bs=512 seek=16384

===== SD Card =====
⚠️ Some versions of the Rock 5B kernel have the eMMC and SD Card devices swapped

sudo dd if=./out/u-boot/idbloader.img of=/dev/mmcblk1 bs=512 seek=64
sudo dd if=./out/u-boot/u-boot.itb of=/dev/mmcblk1 bs=512 seek=16384

===== SPI NOR =====
sudo dd if=./out/u-boot/idbloader.img of=/dev/mtdblock0 bs=512 seek=64
sudo dd if=./out/u-boot/u-boot.itb of=/dev/mtdblock0 bs=512 seek=16384

====== Alternative Method ======
The Radxa U-Boot build scripts also produce a 16MB convenience image suitable for flashing to SPI.
This image includes the first-stage loader (<code>idbloader.img</code>) and U-Boot (<code>u-boot.itb</code>) at the right offsets and is sized appropriately for the SPI chip but is otherwise identical to flashing the individual components.

sudo dd if=./out/u-boot/spi/spi_image.img of=/dev/mtdblock0 bs=512

=== Troubleshooting ===

Check [[rock5/FAQs |ROCK 5 FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock5.