Radxa Wiki - User contributions [en]

Rock3/3c/getting started

2023-06-10T07:14:17Z

Endian: add user / password

{{rock3_header}}
{{Languages|rock3/3c/getting_started}}

[[rock3 | ROCK 3]] > [[Rock3/3c | ROCK 3 Model C]] > [[Rock3/3c/getting_started | Getting started]]

__TOC__

= Getting Started =

This guide is designed for ROCK 3C enthusiast. The purpose is to learn about ROCK 3C as well as how to prepare and set up for basic use.
When you get a board, you need to know what model it is and which hardware version it is.
The information is printed in the top side of the board.
We will introduce the board information as much as possible.

== What you need ==

=== Necessary ===
* ROCK 3C main board

* One of the Storage media below:
** microSD, larger than 8GB or
** eMMC module, larger than 8GB

* Power supply
** The ROCK 3 is powered by Type-C port and support 5V input only. The suggested power adapter is 5V/3A when using without SSD, 5V/5A when using with SSD.

* USB Keyboard and Mouse
** With four USB-A connectors, ROCK 3C can be equipped with a full sized keyboard and mouse.

* Monitor and HDMI Cable
** ROCK 3C is equipped with a full sized HDMI connector. HDMI capable monitor is recommended.
** HDMI EDID display data is used to determine the best display resolution. On monitors and TVs that support 1080p (or 4K) this resolution will be selected. If 1080p is not supported the next available resolution reported by EDID will be used. This selected mode will work with MOST but not all monitors/TVs.

* microSD Card Reader
** For flashing the image into microSD Card

=== Optional ===
* USB type A to type A cable
** This is needed for fastboot/adb commands.

* USB to TTL serial cable
** This is needed for serial console.

* Ethernet cable
** ROCK 3C supports Internet access via WIFI or Ethernet.
** An Ethernet cable is used to connect your ROCK 3 to a local network and the Internet.

* Camera Module
** ROCK 3C supports camera function.

* LCD Module
** ROCK 3C supports 2-lanes MIPI DSI display function.

* Audio cable
** Audio can be played through speaker or headphones using a standard 3.5mm jack.

== Starting the board for the first time ==

ROCK 3C can be started with eMMC Module or microSD Card. Now, you are presented with three options when installing your new operating system onto your ROCK 3C.

=== Prepare ===
* When starting system with eMMC Module
(Option a) Insert the eMMC Module into ROCK Pi eMMC USB Reader. Then plug the Radxa eMMC USB Reader into host PC.

(Option b) Insert eMMC Module into eMMC to μSD card converter board. Insert the converter board into microSD Card Reader. Then plug the Card Reader into host PC.

* When starting system with microSD Card
(Option c) Insert the microSD Card into microSD Card Reader. Then plug the Card Reader into host PC.

=== Write Image ===

* Download the official Ubuntu/Debian system image from [[rock3/downloads | Downloads]]. Make sure choose the right image for ROCK 3C.

* Download the flash tool, etcher, from [[rock3/downloads | Downloads]]. Choose the right version for your host operation system. Here we operate on host Ubuntu 16.04.

* After unpacking the package, we run the tool by executing the command

$ ./etcher-etcher-electron-1.4.5-x86_64.AppImage

If you get an error message: "No polkit authentication agent found" you can try and start it with sudo, but do know that this is running the tool as '''root'''.

* In the etcher window, click '''Select image'''.

[[File:linux_etcher_select_image.png]]

* In the etcher window, click '''Select Drive'''.

[[File:linux_etcher_select_driver.png]]

* In the etcher window, click '''Flash'''.

[[File:linux_etcher_select_flash_button.png]]

* In the etcher window, once it shows us Flash Complete! It is done and can be put into the RockPi.

[[File:linux_etcher_show_complete.png]]

=== 3. Boot the board ===

* Now insert the system storage media, uSD Card or eMMC Module into the socket on the board.

* (Optional) Use the USB to TTL serial cable to setup a connection between PC and ROCK 3C board. See [[rock3/dev/serial-console | Serial Console]].

* Power on ROCK 3C by adapter with type C port.

* ROCK 3C will boot with the green power Led on. And after a while, the other blue Led starts blinking.

* Default user / password is rock / rock

=== 4. Access from the Host PC/Laptop ===

==== Option 1: Serial console ====

Check [[rock3/dev/serial-console | Serial Console]]

==== Option 2: SSH ====
SSH server is enabled on port 22 of ROCK 3C default image.

Please use [https://angryip.org/ angryip] to find your board IP address.

To access ROCK 3C by SSH, try

ping rock3c.local
ssh rock@rock3c.local

or if your router/network doesn't support Local Domain, you need to check your network/router administrator page and look for the ROCK 3A ip address.

ping ip-of-device
ssh rock@ip-of-device

Note: You can also get the IP of ROCK 3C from option 1 if you can not access network administrator page.

=== 5.Network state ===

*Look at network configure:

$ sudo ifconfig

*Test network:

$ ping -c 5 www.google.com

=== 6.WIFI Connection ===

Check [[rock3/Debian#WIFI Connection| WIFI Connection]].

=== 7.BT ===

Check [[rock3/Debian#BT| BT]].

=== 8.LED ===

ROCK 3C has Power LED and User LED.

* Power LED

The power LED is green. It is always on when ROCK 3C is given power by default,

* User LED

The user LED is blue. By default, its blink status shows the running kernel.

=== 9.GPIO ===

ROCK 3C has one 40-pin expansion headers. Each pin is distinguished by color, more information click [https://wiki.radxa.com/Rock3/hardware/3c/gpio here]

Development for GPIO. ROCK 3C supports libmraa GPIO library, click [[Rock3/dev/libmraa | here]] to get more information.

== Next Step ==

* [[Rock3/Debian | More Debian image usage and tips]]
* [[Rock3/Ubuntu | More Ubuntu image usage and tips]]
* [[Rock3/hardware/3a | Checkout the hardware details]]
* Join the [https://forum.radxa.com/c/rock3 community] and the [https://rock.sh/go Discord discussion group]

Rock5/5b/power supply

2023-04-23T15:23:21Z

Endian: /* Known working */

{{rock5_header}}
{{Languages|rock5/5b/power_supply}}

[[rock5 | ROCK 5]] > [[Rock5/5b | ROCK 5 Model B]] > [[Rock5/5b/power_supply | Power Supply]]

__TOC__

ROCK 5B implements the USB C PD as the main power source, The USB Power Delivery (USB PD) enables the maximum functionality of USB by providing more flexible power delivery along with data over a single cable.

=== Known working ===
{| class="wikitable"
|-
! Type
! Capability<br />
! Images
! Note
|-
| Anker A2663
| 5V/3A,9V/3A,15V/3A,20V/3.25A
| Debian11
|
|-
| Anker A2718
| 5V/3A,9V/3A,15V/3A,20V/3.25A
| Debian11
| Anker single port 65w and AENZR six-in-one expansion dock
|-
| Anker A2633
| 5V/3A,9V/2.22A
| Armbian
|
|-
| Anker A2148
| USBC1-C2:5V/3A,9V/3A,15V/3A，20V/5A.USB-A 4.5V/5A,5V/4.5A,5V/3A,9V/2A
| Other
| ubuntu-focal-server-arm64 EMMC starts normally, ssh is normal
|-
| ALLNET PD 65W
| USB-C 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A
| Debian11
| spi+nvme available
|-
| Apple 18W USB-C
| 5V/3A,9V/2A
| style="vertical-align:middle;" | Debian11
|
|-
| Apple 20W USB-C
| 5V/3A,9V/2.22A
| Other
|
|-
| Apple 96W USB-C
| 20.5V/4.7A,15V/3A,9V/3A,5.2V/3A
| Debian11
|
|-
| AUKEY 65W PA-B4
| 5V 3A/9V 2A/12V 1.5A
| Debian11
|
|-
| Baseus CCXFK20C
| 5V/3A,9V/2.22A,12V/1.67A
| Armbian
|
|-
| Baseus CCGAN65C5
| Type-C1/Type-C2 Output: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A Max.
| Debian11
| It needs to be restarted several times, and it cannot be shut down or restarted under debian. I don't know if it is related to the PD agreement. Normal under Ubuntu Server.
|-
| Baseus CCGAN65-1ACC
| Type-C1/Type-C2 output: 5V/9V/12V/15V=3/20V= 3.25A
| Debian11
|
|-
| Baseus CCGAN120C
| Type-C1/Type-C2:20V/5A,5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A 100W Max.
| Debian11
|
|-
| Deltaco USBC-GAN03
| Type-C1/Type-C2:20V/5A,5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A 100W Max.
| Debian11
|
|-
| HUAWEI HW-200325CP0
| 5V/2V、9V/2V、12V/2A、15V/3A、20V/3.25A
| Debian11
| When SD card and mvme coexist, only nvme startup is supported
|-
| HUAWEI HW-100400C00
| 5V/2V、9V/2V、10V/4A
| Debian11
| When SD card and mvme coexist, stuck in infinite boot loop
|-
| HUAWEI HW-100225C00
| 5V/2V、9V/2V
| Debian11
|
|-
| Smartisan DP65C
| 5V/3A、9V/3A、12V/3A、15V/3A、20V/3.25A
| Armbian
|
|-
| ZMIQB822
| 5V/3A、9V/3A、12V/2.25A、15V/1.5A
| Armbian
|
|-
| ZMIHA712
| 5V/3A、9V/3A、12V/3A、15V/3A、20V/3.25A
| Debian11
|
|-
| ZMICXP01
| 5V/3A、9V/3A、12V/3A、15V/3A、20V/3.25A
| Armbian
|
|-
| CHOETECH Q5004-CN-CLBK
| 12V1.5A
| Armbian
|
|-
| MI MDY-11-EX
| 5V/3A,9V/3A,12V/2.25A,20V/1.35A,10V/3A
| Debian11
|
|-
| MI MDY-12-EF
| 5-20V/6.2-3.25A（67W Max）
| Armbian
|
|-
| MI MDY-08-EH
| 5V/2.5A,9V/2A,12V/1.5A
| Debian11
|
|-
| MI MDY-11-EF
| 5V/3A,9V/3A,12V/2.25A,20V/1.35A,10V/3A
| Debian11
|
|-
| NUBIA nb-a1150a
| QC:5V/3A,9V/3A,12V/2.5A.PD:5V/3A,9V/3A,12V/3A.15V/3A
| Debian11
|
|-
| PHILIPS PD 20W
| 12V/1.5A
| Debian11
| TF starts normally, others have not been tested
|-
| Mcdodo CH-790
| USB-C：3.3-20V⎓3A, 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓2.25A 45W Max
| Debian11
|
|-
| Mcdodo CH-791
| USB-C1: 3.3-20V/3A,5V/3A,9V/3A,12V/3A,15V/3A,20V/3.25A Max.USB-C2: 3.3-11V/2.7A,5V/3A,9V/3A,12V/2.5A,15V/2A,20V/1.5A Max.
| Debian11
|
|-
| LENOVO thinkplus GAN65
| 5V/3A.9V/3A.12V/3A.15V/3A.20V/3.25A
| Debian11
| Loud whistling noise.There is a user needing a decoy line for this to work
|-
| LENOVO 40AF0135CN
| Hybrid USB-C with USB-A Dock
| Armbian
| spi and nvme available
|-
| LENOVO YOGA CC65
| USB-C1:5V/3A.9V/3A.12V/3A.15V/3A.20V/3.25A.USB-C2:5V/3A.9V/3A.12V/1.5A.
| Armbian
| TF starts normally, others have not been tested
|-
| SW3518s Module
| 12V
| Debian11
|
|-
| IP6518 Module
| 12V
| Debian11
|
|-
| Ifory 33W
| 5V/3A.9V/3A.12V/2.5A.15V/2A.20V/1.5A
| Armbian
|
|-
| RPI4B 15W
| 5V
| Debian11
|
|-
| WEOFUN GAN01
| USB-C1:5V/3A.9V/3A.12V/3A.20V/3.25A.USB-C2:3.3-11V/5A.5V/3A.9V/3A.12V/3A.15V/3A.20V/3.25A
| Debian11
|
|-
| Sharge S90
| 4.5V/5A,5V/4.5A,9V/3A,12V/3A,20V/3A
| Armbian
|
|-
| PISEN TS-C135
| 5V/3A,9V/2.22A,12V/1.5A
| Debian11
|
|-
| WITRN P3B
| 12V
| Debian11
|
|}

=== Known not working ===

{| class="wikitable"
|-
! Type
! Capability<br />
! Images
! Note
|-
| One plus 8T comes with 65W adapter
| -
| Debian11
| blue light off
|-
| HP Notebook 65W Adapter
| -
| Debian11
| blue light off
|-
| Baseus GaN 65W fast charge (first generation)
| -
| Debian11
| It needs to be restarted several times, and it cannot be shut down or restarted under debian. I don't know if it is related to the PD agreement. Normal under Ubuntu Server
|-
| QD-188PD
| -
| Debian11
| infinite restart
|-
| LEVI27w ev-24acn
| -
| Debian11
| infinite restart.The charging head does not have a 12V gear
|-
| mipad 5pro 5g
| MDY-12-EF（67w type-A）
| Debian11
| infinite restart
|-
| MI-GAN65W
| -
| Debian11
| Insert hdmi to restart infinitely, after removing hdmi, the probability of successful startup can be improved
|-
| SONY PD18W (9V2A)
| -
| Debian11
| Green is short and blue is long.infinite restart
|-
| MI-MDY-08-EH
| 18w type-A
| Debian11
| cat supports_usb_power_delivery command shows no, sensors command shows 5v input voltage.When the load is high, it will automatically restart
|-
| Nintendo Switch power supply
| -
| Debian11
| Overload protection, unusable
|-
| iPad3 Apple power supply
| 10W (5.1V2.1A)
| Debian11
| Green is short and blue is long, there is no sign of restarting, but it keeps looping and does not start
|-
| ZMIHA832
| -
| Other
|
|-
| Lumdoo 57W PD(S-TR-141)
| -
| Armbian
| Green is short and blue is long.infinite restart
|-
| Apple 61W USB-C
| Macbook Pro
| Debian11
| infinite restart
|-
| DELL U2720QM PD90W
| -
| Debian 11
| infinite restart
|-
| Anker PD 65W
| -
| Debian 11
| infinite restart
|
|-
| OnePlus Dash
| 5V 4A
| Debian 11
| infinite restart
|
|}