Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rock2"

Line 56: Line 56:
 
                     <li>5~12V/4A</li>
 
                     <li>5~12V/4A</li>
 
                     <li>uSD up to 128GB, <strong>2.5"/3.5"</strong> HD up to 4TB</li>
 
                     <li>uSD up to 128GB, <strong>2.5"/3.5"</strong> HD up to 4TB</li>
                     <li>OTG<strong>x1</strong>, host <strong>x2</strong></li>
+
                     <li><strong>1 x </strong>OTG, <strong>2 x </strong>host</li>
 
                     <li><strong>Dual 1000M</strong> **</li>
 
                     <li><strong>Dual 1000M</strong> **</li>
 
                     <li>HDMI 2.0, eDP, LVDS, MIPI</li>
 
                     <li>HDMI 2.0, eDP, LVDS, MIPI</li>

Revision as of 05:30, 3 March 2015


Radxa Rock2 is a series of the second generation SBC(Single Board Computer) from Radxa. The rock2 series uses the modular design for flexibility and cost saving for the users.

Comparison

Item

  • Power
  • Storage
  • USB
  • Ethernet
  • Display
  • Wireless
  • Audio
  • Misc
  • extension header

Square Baseboard

  • 5V/3A
  • uSD up to 128GB, 2.5" hard drive up to 4TB *
  • 1 x OTG, 3 x host
  • 1000M
  • HDMI 2.0, eDP, LVDS***
  • Bluetooth 4.0(BLE support), 802.11 a/b/g/n/c wifi
  • SPDIF, Headphone with line in, Mic
  • IR, debug UART, RTC
  • 50pin 2mm LVDS, 40pin 2.54mm for gpio, i2c, uart, spi

Full Baseboard

  • 5~12V/4A
  • uSD up to 128GB, 2.5"/3.5" HD up to 4TB
  • 1 x OTG, 2 x host
  • Dual 1000M **
  • HDMI 2.0, eDP, LVDS, MIPI
  • Bluetooth 4.0(BLE support), 802.11 a/b/g/n/c wifi, HSPA/WCDMA, EDGE/GPRS/GSM
  • Headphone with line in, Mic
  • IR, debug UART, RTC
  • 2 x 40pin 2.54mm header for gpio, i2c, uart, spi

*For square base board, 3.5" hard drive is also supported with external power, both sata via USB bridge, max speed 480Mbit/s.

** For full base board, one 1000M ethernet via USB bridge, max speed 480Mbit/s

*** LVDS via the 50pin 2.0mm header