Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rockpi4/install"

< Rockpi4Redirect page
(Choose host machine)
(Redirected page to Rock4/install)
 
(26 intermediate revisions by 2 users not shown)
Line 1: Line 1:
__NOTOC__
+
#redirect [[rock4/install]]
 
+
== Installation ==
+
Choose and install an operation system on your ROCK Pi 4. To appropriately follow this installation guide you will need to:
+
* Choose an installation method
+
* Download necessary files
+
* Choose host machine
+
* Follow flashing instructions
+
 
+
=== Methods of Installation ===
+
In most cases, you will be presented with two options when installing your new operating system onto your ROCK Pi 4:
+
* eMMC USB upgrade Method
+
** The firmware will be downloaded from the USB to the ROCK Pi 4 on board eMMC storage
+
* Running on SD Card Method
+
** The firmware will be written on a SD Card  that will lately be inserted  onto ROCK Pi 4.
+
Each Method has its own benefits and requires different levels of experience.
+
 
+
==== eMMC USB upgrade Method ====
+
[http://opensource.rock-chips.com/wiki_Rockusb Rockusb] is a custom USB protocal from Rockchip supported by ROCK Pi 4 and can be used for firmware installation(USB to eMMC). This method applies to advanced users who are most familiar with command line tools or modified/custom source code and need to download such updates to the board for testing/execution.
+
 
+
===== This method requires the following hardware: =====
+
* ROCK Pi 4 board with power supply
+
* Host machine (Linux/Mac)
+
* USB Type-A to Type-A cable
+
* USB serial to TTL cable(not required to perform flash)
+
* USB Mouse and/or keyboard (not required to perform flash)
+
* HDMI Monitor with full size HDMI cable (not required to perform flash)
+
* Ethernet cable (not required to perform flash)
+
 
+
===== Go to the [Download page] to get your system =====
+
 
+
===== Choose host machine =====
+
 
+
* Linux
+
====== Step 1: Make sure rkdeveloptool is set up on host computer ======
+
 
+
To build rkdeveloptool on a debain based Linux distribution, follow the instruction below:
+
 
+
Install build dependecy:
+
  sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
+
 
+
Clone the source code and build:
+
  git clone https://github.com/rockchip-linux/rkdeveloptool
+
  cd rkdeveloptool
+
  autoreconf -i
+
  ./configure
+
  make
+
 
+
Now you have rkdeveloptool executable at the current directory.
+
  sudo cp rkdeveloptool /usr/local/bin/
+
 
+
====== Step 2: Make sure upgrade_tool is set up on host computer ======
+
 
+
Go to the [Download Page ] to get your upgrade_tool.
+
 
+
====== Step 3: Download all necessary images ======
+
For ROCK Pi 4, there are two formats of system images. They have already been distinguished by name, one is xxx-gpt.img and the other is xxx-rkupdate.img. They have different method for flashing.
+
 
+
When you choose the format of xxx-gpt.img, you also need rk3399_loader_xxx.bin and the tool, rkdeveloptool.
+
 
+
When you choose the format of xxx-rkupdate.img, you also need the tool, upgrade_tool.
+
 
+
====== Step 4: Boot device into maskrom mode ======
+
 
+
1. Insert eMMC Module into eMMC to uSD card converter board. Insert the converter board into uSD Card Reader, which connects to host
+
Linux OS.<br />
+
2. Use the command to erase the eMMC device
+
  sudo dd if=/dev/zero of=/dev/sdx bs=1M count=100
+
3. Insert the eMMC onto the socket on board.<br />
+
4. Power on ROCK Pi 4.<br />
+
5. Plug the ROCK Pi 4 to Linux Desktop with USB type A to type A cable. On the host PC, command, lsusb, should show the following VID/PID if the board is in maskrom mode: Bus 003 Device 061: ID 2207:0011
+
 
+
====== Step 6: Flash images onto ROCK Pi 4 eMMC and reboot ======
+
 
+
When you choose the format of xxx-gpt.img, you should follow the steps:
+
  rkdeveloptool db rk3399_loader_xxx.bin
+
  rkdeveloptool wl 0 system.img
+
  rkdeveloptool rd
+
 
+
When you choose the format of xxx-rkupdate.img, you should follow the steps:
+
  upgrade_tool uf xxx-rkupdate.img
+
 
+
Now you reboot the new image on eMMC.
+
 
+
* Mac
+
 
+
==== Running on SD Card Method ====
+
 
+
Running on SD card method allows you to place a microSD card into a ROCK Pi 4 to automatically boot and run.
+
 
+
===== This method required the following hardware =====
+
* ROCK Pi 4 board with power supply
+
* Host machine (Linux/Mac/Windows)
+
* MicroSD card with 8GB or larger of storage
+
* USB Mouse and/or keyboard
+
* HDMI Monitor with full size HDMI cable
+
* Ethernet cable
+
 
+
===== Go to the [Download page] to get your system =====
+
 
+
===== Choose host machine =====
+
 
+
The host machine type includes Linux, Mac, Windows. But this solution doesn't support  flashing images in xxx-rkupdate.img format.
+
 
+
====== Step 1: Make sure etcher is set up on host computer ======
+
 
+
Download the flash tool [https://etcher.io etcher]. Choose the right version for your host operation system. Here we operate on host Ubuntu 16.04.
+
[[File:linux_etcher_download_website.png]]
+
 
+
After download the package, unpack it.
+
 
+
====== Step 2: Download all necessary images ======
+
 
+
Go to the [Download Page] to get the system images. Only select the images in xxx-gpt.img format.
+
 
+
====== Step 3: Flash the image into uSD  Card ======
+
 
+
1. Insert the uSD Card into uSD Card Reader, which connects to host computer.
+
 
+
2. Run the tool, for example,  by executing the command on Ubuntu 16.04:
+
  $ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage
+
 
+
3. In the etcher window, we click button Select image.
+
[[File:linux_etcher_select_image.png]]
+
 
+
4. In the etcher window, we click button Select Drive.
+
[[File:linux_etcher_select_drive.png]]
+
 
+
5. In the etcher window, we click button Flash.
+
[[File:linux_etcher_select_flash.png]]
+
 
+
6. In the etcher window, it shows us Flash Complete!
+
[[File:linux_etcher_show_complete.png]]
+
 
+
7. Insert uSD Card into the socket on board.
+
 
+
8. Connect the ROCK Pi 4 to your display with the HDMI cable. Ensure that the source for the display is switched to the HDMI port you are using.
+
 
+
9. Connect the USB keyboard and mouse.
+
 
+
10. Connect the power supply to the ROCK Pi 4. The board will begin to immediately.
+

Latest revision as of 12:59, 25 August 2022